Lightweight, flexible, and conformal bioelectronics are essential for wearable technologies. This paper introduces 270 nm thin organic electronics amplifying circuits that are self-adhesive, skin conformal, and long-term air-stable. This report studies the effect of total device thickness, namely 3 μm and 270 nm devices, on the characterization of organic devices before and after buckling, the longevity of organic field-effect transistors (OFETs) over 5 years, and the lamination of OFETs on the human skin. A single-stage organic complementary inverter and a pseudo-complementary amplifier are fabricated to compare their electrical characteristics, with amplification gains of 10 and 64, respectively. Finally, the study demonstrates a five-stage organic complementary inverter can successfully amplify artificial electromyogram and electrocardiogram signals with gains of 1000 and 1088, respectively.
28 March 2019 in Synthesis Lectures on Mechanical Engineering
This book aims to provide the basic theory of fractional calculus and its applications based on practical schemes and approaches, illustrated with applicable engineering and technical examples, especially focusing on the fractional-order controller design. In the development of this book, the essential theorems and facts in the first two chapters are proven with rigorous mathematical analyses. In addition, the commonly used definitions of Grünwald-Letnikov, Riemann-Liouville, Caputo, and Miller-Ross fractional derivatives are introduced with their properties proved and linked to fractional-order controller design. The last chapter presents several enlightening scenarios of fractional-order control designs, for example, the suppression of machining chatter, the nonlinear motion control of a multilink robot, the simultaneous tracking and stabilization control of a rotary inverted pendulum, and the idle speed control of an internal combustion engine (ICE). Table of Contents: Preface / Acknowledgment...
Allowing for a “virtual” full actuation of a rotary inverted pendulum (RIP) system with only a single physical actuator has been a challenging problem. In this paper, a hybrid control scheme that involves a pole-placement feedback controller and an optimal proportional–integral–derivative (PID) or fractional-order PID (FOPID) controller is proposed to simultaneously enable the tracking control of the rotary arm and the stabilization of the pendulum arm in an input–output feedback linearized RIP system. The PID controller is optimized first with the particle swarm optimization (PSO) to obtain three optimal gains, and then the other two parameters of the FOPID controller are optimized with the PSO. Compared to the optimized PID controller, the optimized FOPID controller improves the tracking and stabilizing accuracy by 53% and 29%, respectively, and demonstrates better adaptability for tracking different reference signals. Moreover, the hybrid FOPID controller exhibits 74.8% and 53% higher tracking accuracy than previous optimized model reference adaptive control PID (MRAC-PID) and linear–quadratic regulator (LQR) controllers, respectively. The proposed hybrid controllers are also digitized with different rules and sampling times, showing a closer performance between the discrete-time and continuous-time hybrid controllers under smaller sampling times.
1 January 2020 in International Journal of Powertrains
This paper aims at proposing a discrete-time fractional-order PID (FOPID) controller, which can stabilise the variation of the idle speed of an internal combustion engine due to the occurrence of the external load disturbance. The nonlinear idle speed dynamics is linearised to be approximated by a first order plus dead time (FOPDT) model so that the FOPID controller can be initialised by a Ziegler-Nichols type tuning rule. The initialised FOPID controller can stabilise the linearised model, but it may lose its control capability in nonlinear idle speed dynamics. Therefore, an optimisation problem is solved through genetic algorithm (GA) to minimise a cost function within a small region around the FOPID's initial parameters. The optimal discrete-time FOPID controller are compared to a conventional discrete-time PID controller. The simulation study reveals that the optimal discrete-time FOPID controller secures an excellent control performance to the nonlinear idle speed model.