The rheological properties of lithium grease and polyurea grease at different temperatures and consistencies were determined with a rotary rheometer. The plateau moduli of the greases were calculated, and the mechanism of influence of consistency and temperature on the rheological properties of the greases was explained. The tribological and wear properties of the two greases were measured by high-temperature friction and wear tester. The friction and wear mechanisms are probed by the rheological properties of lubricating grease. The results show that the plateau modulus GN can be used to assess the structural strength of different greases, but it can only assess the degree of entanglement of the same grease. The higher the consistency of the grease, the larger the apparent viscosity, structural strength, and yield stress. The rheological properties of PAO-polyurea grease are greatly affected by temperature, but its structural strength is better than that of mineral oil-lithium grease. The consistency of mineral oil-lithium grease is expected to affect the friction coefficient and wear through its influence on the grease’s structural strength and film-forming ability. For PAO-polyurea, the consistency in a certain range has little effect on the friction coefficient and wear resistance.
Few-layer graphene (FLG) was added as a nano-additive to lithium complex grease (LCG) to explore the influence of FLG on the microstructure, viscoelasticity, friction and wear properties of LCG. Studies have found that the addition of FLG makes the microstructure of the thickener more compact, which in turn leads to an increase in the viscoelasticity of LCG. FLG additives can improve the viscosity-temperature properties of the grease and change the elastic deformation response to temperature changes. Among the temperatures selected in this article, the effect of graphene is more obvious at 70 °C. During the friction process, a proper amount of FLG can quickly form a boundary film and is not easily damaged, thereby optimizing the friction and wear performance of LCG.
In order to help one to judge the friction properties of lubricating oils without tests, this paper intends to establish the correlation between the characteristic parameters of lubricating oils and the friction properties. The elastohydrodynamic and boundary friction properties of poly alpha olefin (PAO) synthetic oil, polyol ester oil and paraffin-based mineral oil were tested using a Mini-Traction Machine. Fourier transform infrared microscopy is used to identify material changes before and after friction tests. The kinematic and dynamic viscosities of the three lubricating oils were measured using a petroleum product viscosity tester and a rotating rheometer. The results show that the kinematic viscosity does not directly determine the COF (coefficient of friction) of the lubricating oil, but the higher the dynamic viscosity, the higher the COF of the lubricating oil. The higher the viscosity-pressure coefficient, the lower the viscosity index (the worse the viscosity-temperature performance), and the higher the COF of the lubricating oil, which is related to the adaptability of the molecular structure of lubricating oils to pressure and temperature. PAO synthetic oils and polyol ester oils have excellent friction properties resulting from their strong adaptability to temperature and pressure variations due to the presence of linear chains and flexible groups.