Surface texture plays an important role in improving the tribological properties of materials. In this paper, the effect of different shapes (i.e., triangle, square, hexagon, round) on the tribological performance of cross-grooved texture was investigated. First, the mixed lubrication condition was used for the pin-on-disc rotating sliding tests. Then, the stress distribution of the four textures was analyzed to better explain the experimental results. Overall, the hexagon-textured specimens exhibited lower friction coefficients than the other shape-textured specimens under the examined conditions. Simulation results indicate that the contact stress can be reduced on the surface of hexagon-textured specimens, and this leads to a better oil film for lubrication. Furthermore, the hydrodynamic lubrication stood out with the increase of speeds to 250 rpm. However, as the test loads further increased, the film thickness decreased, resulting in the increase in the asperity contact areas, which dropped the above advantage of hexagon-textured specimens. This study would be beneficial for the texturing tribological and lubrication design.
The ventral scales of Dinodon rufozonatum were investigated to understand the outstanding tribological adaptability in various environments. The coefficient of friction (COF) of ventral scales was measured and changed with the contact conditions. It was discovered that the COF of scales under water-lubrication conditions (WLC) was larger than that under dry conditions (DC). More interestingly, the COF increased first and then decreased as the substrate roughness reduced. The abrasion marks on scales were then observed. The results indicated that the scales in DC wore more gently than that in WLC. Moreover, the degree of wear reduced with the decrease of substrate roughness. The frictional performance of ventral scales enabled the snakes to move more efficiently, quickly, and flexibly in multiple environments.