Tests have been performed in a biaxial pipe test cell to develop baseline information on profiled pipe behavior under biaxial loading. These include a lined corrugated high-density polyethylene pipe and a helically wound ribbed polyvinyl chloride pipe. Results of the tests are utilized to examine the effectiveness of the two-dimensional methods of buried pipe analysis. Calculations of pipe responses by the two-dimensional finite element method and a set of simplified design equations are compared with the measurements of pipe strains and deflections. The study reveals that the two-dimensional finite element analysis can effectively be used to calculate pipe deflections and circumferential strains. The simplified equations appear suitable as design tools for standard buried thermoplastic pipe installations. Janbu’s nonlinear soil model with Mohr–Coulomb plasticity provided an effective simulation of the nonlinear soil behavior A study of pipes with low stiffness soil support under the haunches shows that t...
1 June 2021 in International Journal of Pressure Vessels and Piping
A number of burst pressure models were developed to determine the remaining strength of corroded pipelines. However, no single model has been found to be acceptable for predicting the burst pressure correctly. In this paper, the burst pressure models for corroded pipelines are revisited based on the structures of three existing models. The model parameters are re-evaluated using an optimization (differential evolution) algorithm with a database developed based on finite element (FE) analysis. A series of FE analysis are performed to determine the burst pressures of corroded pipelines with varying pipe diameters, wall thicknesses, corrosion dimensions and material strength grades. The models with new sets of model parameters provide the burst pressure reduction factors that match with the FE results and experimental data better than the existing models. The study reveals that FE analysis along with an optimization algorithm can effectively be used to develop improved models for better fitness-for-service assessment of pipelines.
1 November 2019 in Reliability Engineering & System Safety
The strength of pipeline with multiple corrosion patches depends on the number of corrosion patches within an area on the pipe surface, the locations of corrosion patches along the longitudinal and circumferential directions of the pipe. In this paper, the strength and deformation characteristics of corroded pipeline are investigated using finite element analysis. Pipes with different diameters and different depths of corrosion patches are considered. The spacing of the corrosion patches is varied along longitudinal, diagonal, and circumferential directions of the pipes. The study shows that the limiting spacing for interaction of corrosion patches depends predominantly on pipe wall thickness, corrosion depth, and the location of the defects. The diameter of the pipe has some influence on the interaction for large diameter pipes. A new interaction rule for the limiting spacing for interaction is developed for longitudinally spaced corrosion patches. For circumferentially spaced corrosion patches, the ASME recommendation for the limiting spacing is found to be reasonable.