First bandwidth measurements of a novel gyrotron amplifier are presented. The coupling between the second harmonic cyclotron mode of a gyrating electron beam and the radiation field occurred in the region of near infinite phase velocity over a broad bandwidth by using a cylindrical waveguide with a helical corrugation on its internal surface. With a beam energy of 185 keV, the amplifier achieved a maximum output power of 1.1 MW, saturated gain of 37 dB, linear gain of 47 dB, saturated bandwidth of 8.4 to 10.4 GHz ( $21\%$ relative bandwidth), and an efficiency of $29\%$, in good agreement with theory.

A new microwave system in the form of a cylindrical waveguide with a helical corrugation of the inner surface is proposed for a gyrotron traveling wave tube (gyro-TWT). The corrugation radically changes the wave dispersion in the region of small axial wave numbers. This allows significant reduction in the sensitivity of the amplifier to the electron velocity spread and an increase in its frequency bandwidth. An $X-\mathrm{band}$ gyro-TWT operating at the second cyclotron harmonic with a 200-keV, 25-A electron beam produced an output power of 1 MW, corresponding to a gain of 23 dB and an efficiency of 20%.

A helical corrugation of the inner surface of an oversized cylindrical waveguide provides, for certain parameters, an almost constant value of group velocity and close to zero longitudinal wavenumber of an eigenwave for a very broad frequency band. The use of such a helical waveguide as an operating section of a gyrotron traveling wave tube (gyro-TWT) allows significant widening of its bandwidth and an increase in the efficiency at very large particle velocity spreads. In this paper, the new concept is confirmed by theoretical analysis and "cold" measurements of the helical waveguide dispersion. Results of a linear and nonlinear theory of the helical gyro-TWT as well as two designs for subrelativistic (80 keV, 20 A) and relativistic (300 keV, 80 A) electron beams are also presented. For both designs, parameters providing a very broad frequency band (about 20%) and high efficiency (above 30%) have been found, When the transverse velocity spread is increased from zero up to a very high value of 40 %, simulations showed only a 20%-30% narrowing in the frequency band and a 20% decrease in electron efficiency. The theoretical analysis demonstrates important advantages of the helical gyro-TWT over the "smooth" one in frequency bandwidth, sensitivity to electron velocity spread, and stability to parasitic self-excitation

A new method to generate ultrahigh-power microwave pulses compatible with mildly relativistic electron sources is proposed. This method involves a novel microwave compressor in the form of a metal helically corrugated waveguide, which can enhance the power of frequency-modulated nanosecond pulses up to the multigigawatt level. The results of the proof-of-principle experiments at kilowatt power levels are in good agreement with theory.

A helically corrugated waveguide was used for a gyrotron backward-wave oscillator (gyro-BWO) experiment. A thermionic cathode was used to produce an electron beam of 90-215 keV in energy, 2-3 A in current, and pitch alpha of up to 1.6. The oscillator achieved high-efficiency frequency-tunable operation. At a fixed beam voltage of 185 kV and a current of 2 A, the output frequency was tuned by adjusting the magnetic field in the interaction cavity. A maximum power of 62 kW and a 3-dB frequency-tuning band of 8.0-9.5 GHz (17% relative tuning range) with a maximum electronic efficiency of 16.5% were measured. In addition, the interaction frequency could be tuned by varying the electron beam energy. At a fixed cavity magnetic field of 0.195 T, the output frequency and power from the gyro-BWO were measured as a function of tuning electron beam energy while the beam current was maintained at 2.5 A. A 3-dB relative frequency tuning range of 8% was measured when the electron beam voltage was changed from 215 to 110 kV.

A gyrotron backward wave oscillator (gyro-BWO) with a helically corrugated interaction waveguide demonstrated its potential as a powerful microwave source with high efficiency and a wide frequency tuning range. This letter presents the theory describing the dispersion properties of such a waveguide and the linear beam-wave interaction. Numerical simulation results using the PIC code MAGIC were found to be in excellent agreement with the output measured from a gyro-BWO experiment.