This study aimed to evaluate how extrusion cooking conditions and microwave heating play a role in enhancing physical and thermal properties of third-generation expanded cellular snacks made from yellow pea (YP) and red lentil (RL) flours for the first time. Increasing temperature and moisture content during extrusion resulted in darker, crunchier and crispier products with higher expansion index (EI). Microwave heating after extrusion led to an increase in cell size and porosity of YP and RL products when qualitatively compared to extrusion alone. Additionally, extrusion followed by microwave heating resulted in extensive damage to starch granular structure and complete denaturation of proteins. Using microwave heating, as a fast and inexpensive process, following partial cooking with extrusion was demonstrated to greatly improve the physical and thermal properties of YP and RL snacks. Microwave heating following mild extrusion, instead of severe extrusion cooking alone, can potentially benefit the development of high quality nutritionally-dense expanded cellular snacks made from pulse flours.
Bu çalışmanın amacı, Gıda ve Yemler için Hızlı Alarm Sistemi (RASFF) veri kaynağında 2009–2018 yılları arasında gıdalarda yapılan bildirim sayılarını geniş kapsamlı incelemektir. Portalda RASFF üye ülkeleri ile Türkiye kaynaklı gıda ve gıda ürünlerinden elde edilen veriler; yıllara, ürün kategorilerine, bildirim türlerine, risk kararlarına, bildirim kaynağına ve tehlike kategorilerine göre sınıflandırılmıştır. Ürün kategorisine göre sonuçlar değerlendirildiğinde, en fazla bildirim meyve ve sebzelerde tespit edilmiştir. Bu ürün grubunun; veri kaynağına aktarılan tüm gıdalar içerisindeki oranı %20 olarak saptanmış, Türkiye kaynaklı bildirimi yapılan gıdalar arasındaki payı ise dikkate değer düzeyde (%62) yüksek bulunmuştur. İlgili süreçte, gıdalarda yapılan bildirimlerde tehlike kategorilerine bakıldığında ilk sırayı mikotoksinlerin aldığı görülmektedir. Mikotoksinler incelendiğinde en fazla bildirimin aflatoksinlerde (%89) olduğu ve bunu okratoksin A (%9)’nın takip ettiği belirlenmiştir. Ülkemiz kaynaklı gıda bildirimlerinde de benzer bir tablo elde edilmiştir.
Background and Objectives: Although bread waste is often processed into breadcrumbs for use in breading formulations, an alternative method to add value to this by‐product is to incorporate it into snack food applications. This study examined the extrusion of breadcrumbs under varying conditions of feed moisture content (13%, 15%, or 17%) and die temperature (120°C or 150°C). To enhance the total dietary fiber (TDF) content of the extrudates, the base breadcrumbs formula was supplemented with resistant starch types 2 and 4 (RS2 and RS4) at different concentrations (15% and 30%). The physical and techno‐functional properties of the resulting breadcrumb extrudates (BCEs) were then investigated.Findings: The TDF content of BCEs generally increased with higher feed moisture contents, but it was not affected by different die temperatures. The highest radial expansion index (6.33) among the RS‐supplemented BCEs was achieved with RS2‐supplemented BCEs extruded at a die temperature of 120°C and a feed moisture content of 13%. RS4 supplementation also produced BCEs with similar properties under certain extrusion conditions.Conclusions: There was no significant difference in TDF content between RS2 and RS4‐supplemented BCEs at the lowest feed moisture content studied. Overall, RS2 supplementation had a less negative impact on the extrudate expansion index, density, and crispness values compared to RS4 supplementation, indicating the better suitability of RS2 for snack food applications. All BCEs produced had TDF contents higher than 6%, allowing them to carry a “high fiber content” claim according to relevant European Union regulations.Significance and Novelty: The effects of different types of resistant starch on the physical and techno‐functional properties of extruded snacks have not been studied to date. This study addresses this research gap and adds value to a major by‐product of the bakery industry, breadcrumbs, by incorporating them into snack food applications.
12 March 2020 in Journal of Food Science and Technology
Nişasta, amiloz ve amilopektin polisakkaritlerinden meydana gelmiş, gıdalara yapısal özellikler kazandıran, beslenmemizde enerji ihtiyacımızın önemli bir kısmını karşılayan, sindirilebilir bir karbonhidrattır. Nişastaların farklı amiloz/amilopektin oranları; granüler yapıda, fiziko-kimyasal özelliklerde ve son ürün kalitesinde bazı farklılıklara sebep olmaktadır. Genellikle, normal, mumlu ve yüksek amilozlu nişastalarda amiloz/amilopektin oranı sırasıyla 25/75, 0/100 ve 70/30 olarak belirtilmiştir. Doğal nişastaların gıdalardaki kullanımı sınırlı kalmaktadır. Normal nişasta hızlı sindirilebilir olması sebebiyle gıdanın glisemik indeksini yükseltir. Yüksek amilozlu tahıl nişastaları, enzime dirençli nişasta üretiminde kullanılmaktadır. Amiloz içeriği arttıkça nişasta sindirimi de yavaşlamaktadır. Gıdaların beslenme kalitesinin farklı yapısal ve fonksiyonel özellikteki nişasta tipleri kullanılarak artırılması, beslenmeye bağlı kronik hastalıkları azaltmada etkili olabileceği belirtilmektedir. Beslenmedeki önemi dışında, nişastanın gıdalarda çirişlenme, su tutma, geçirgenlik, stabilizatör ve kıvam artırıcı özelliklerinin iyileştirilebilmesi için farklı tipte nişastalara ihtiyaç duyulmaktadır.