BiFeO 3 is a photocatalyst with excellent performance. However, its applications are limited due to its wide bandgap. In this paper, MIL-101(Fe)@BiOI composite material is synthesized by hydrothermal method and then calcined at high temperature to obtain BiFeO 3 @Bi 5 O 7 I composite material with high degradation capacity. Among them, an n–n heterojunction is formed, which improves the efficiency of charge transfer, and the recombination of light-generated electrons and holes promotes improved photocatalytic efficiency and stability. The result of photocatalytic degradation of tetracycline under visible light irradiation showed, BiFeO 3 @Bi 5 O 7 I (1:2) has the best photodegradation effect, with a degradation rate of 86.4%, which proves its potential as a photocatalyst.
In the study, ZIF-8@BIOI composites were synthesized by the hydrothermal method and then calcined to acquire the ZnO@Bi5O7I composite as a novel composite for the photocatalytic deterioration of the antibiotic tetracycline (TC). The prepared ZnO@Bi5O7I composites were physically and chemically characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer–Emmet–Teller (BET) surface area, UV–Vis diffuse reflectance spectroscopy (DRS), emission fluorescence spectra, transient photocurrent response, electrochemical impedance spectra and Mott–Schottky. Among the composites formed an n–n heterojunction, which increased the separation efficiency of electrons and holes and the efficiency of charge transfer. After the photocatalytic degradation test of TC, it showed that ZnO@Bi5O7I (2:1) had the best photodegradation effect with an 86.2% removal rate, which provides a new approach to the treatment of antibiotics such as TC in wastewater.
24 February 2025 in Advanced Composites and Hybrid Materials
Synthesizing graphene at a large-scale and of high quality on insulating substrate is a prerequisite for graphene applications in electronic devices. Typically, graphene is synthesized and then transferred to the proper substrate for subsequent device preparation. However, the complicated and skilled transfer process involves some issues such as wrinkles, residual contamination and breakage of graphene films, which will greatly degrade its performance. Direct synthesis of graphene on insulating substrates without a transfer process is highly desirable for device preparation. Here, we report a simple, transfer-free method to synthesize graphene directly on insulating substrates (SiO2/Si, quartz) by using a Cu layer, graphene oxide and Poly (vinyl alcohol) as the catalyst, seeds and carbon sources, respectively. Atomic force microscope (AFM), scanning electronic microscope (SEM) and Raman spectroscopy are used to characterize the interface of insulating substrate and graphene. The graphene films directly grown on quartz glass can attain a high transmittance of 92.8% and a low sheet resistance of 620 Ω/square. The growth mechanism is also revealed. This approach provides a highly efficient method for the direct production of graphene on insulating substrates.