Nonlinear model predictive control of a boiler unit: A fault tolerant control study: This paper deals with a nonlinear model predictive control designed for a boiler unit. The predictive controller is realized by means of a recurrent neural network which acts as a one-step ahead predictor. Then, based on the neural predictor, the control law is derived solving an optimization problem. Fault tolerant properties of the proposed control system are also investigated. A set of eight faulty scenarios is prepared to verify the quality of the fault tolerant control. Based of different faulty situations, a fault compensation problem is also investigated. As the automatic control system can hide faults from being observed, the control system is equipped with a fault detection block. The fault detection module designed using the one-step ahead predictor and constant thresholds informs the user about any abnormal behaviour of the system even in the cases when faults are quickly and reliably compensated by the predictive controller.

The paper presents a deep learning approach for automatic classification of breast tumors based on fine needle cytology. The main aim of the system is to distinguish benign from malignant cases based on microscopic images. Experiment was carried out on cytological samples derived from 50 patients (25 benign cases + 25 malignant cases) diagnosed in Regional Hospital in Zielona Góra. To classify microscopic images, we used convolutional neural networks (CNN) of two types: GoogLeNet and AlexNet. Due to the very large size of images of cytological specimen (on average 200000 × 100000 pixels), they were divided into smaller patches of size 256 × 256 pixels. Breast cancer classification usually is based on morphometric features of nuclei. Therefore, training and validation patches were selected using Support Vector Machine (SVM) so that suitable amount of cell material was depicted. Neural classifiers were tuned using GPU accelerated implementation of gradient descent algorithm. Training error was defined as a cross-entropy classification loss. Classification accuracy was defined as the percentage ratio of successfully classified validation patches to the total number of validation patches. The best accuracy rate of 83% was obtained by GoogLeNet model. We observed that more misclassified patches belong to malignant cases.

System identification is one of the most important research directions. It is a diverse field which can be employed in many different areas. One of them is the model-based fault diagnosis. Thus, the problems of system identification and fault diagnosis are closely related. Unfortunately, in both cases, the research is strongly oriented towards linear systems, while the problem of identification and fault diagnosis of non-linear dynamic systems still remains open. There are, of course, many more or less sophisticated approaches to this problem, although they are not as reliable and universal as those related to linear systems, and the choice of the method to be used depends on the application. The purpose of this paper is to provide a new system identification framework based on a genetic programming technique. Moreover, a fault diagnosis scheme for non-linear systems is proposed. In particular, a new fault detection observer is presented, and the Lyapunov approach is used to show that the proposed observer is convergent under certain conditions. It is also shown how to use the genetic programming technique to increase the convergence rate of the observer. The final part of this paper contains numerical examples concerning identification of chosen parts of the evaporation station at the Lublin Sugar Factory S.A., as well as state estimation and fault diagnosis of an induction motor.

The paper shows a unified approach for designing both sensor and actuator fault diagnosis with neural networks. In particular, a general scheme of the group method of data handling neural networks is recalled. Subsequently, a unscented Kalman filter approach for designing the network and determining its uncertainty is briefly portrayed. The achieved results are then used to obtain the so-called robust sensor fault diagnosis scheme. The main contribution of this paper is to show how to use the above-mentioned results for actuator fault diagnosis. In particular, the obtained neural model is used to obtain the input estimates. The achieved estimates are then compared with the original input signals to formulate the diagnostics decisions. The input estimation scheme is based on a chain of robust observers, which guaranties that the input estimates are obtained with a prescribed disturbance attenuation level while ensuring the convergence of the observers. The final part of the paper shows a comprehensive case study regarding the laboratory tunnel furnace, which exhibits the performance of the proposed approach.