Traditional laser thin film optical components are specially designed layered structures made of two or more materials. However, as the number of layers increases, the anti-laser damage ability of the optical elements is significantly reduced. In this study, a single-layer structured surface is designed to have better optical transmittance than its homogeneous substrate. It also shows potential advantages in laser damage resistance applications. The transmittance and laser damage morphology of periodic cylindrical surfaces and their uniform substrates using a combination of experimental and simulation methods are examined. According to ISO21254, the laser-induced damage threshold (LIDT) of the structured surface and the uniform substrate were measured on a 1-on-1 irradiation of a 1,064 nm laser with a pulse width of 10 ns. The measured LIDT values were (15.3 ± 1.15) J/cm 2 for the structured surface and (15.2 ± 1.09) J/cm 2 for the uniform substrate. The damaged morphology of the structured surface was analyzed using a polarizing microscope to study its periodic distribution. Additionally, the electric field distribution on the surface of the structure and its uniform substrate was simulated using the finite element method. The results indicate that the damage characteristics of the structured surface are influenced by the surface structure, and the presence of the structure influences the energy distribution of laser deposition. This study serves as a valuable reference for further research into the laser damage mechanism of structured surfaces.
The laser-induced damage threshold (LIDT) is a key measure of an optical component’s resistance to laser damage, making its accurate determination crucial. Following the ISO 21254 standards, we studied the measurement strategy and uncertainty fitting method for laser damage, establishing a calculation model for uncertainty. Research indicates that precise LIDT measurement can be achieved by using a small energy level difference and conducting multiple measurements. The LIDT values for the cylindrical grating are 15.34 ± 0.00052 J/cm2 (95% confidence) and 15.34 ± 0.00078 J/cm2 (99% confidence), demonstrating low uncertainty and reliable results. This strategy effectively measures the LIDT and uncertainty of various grating surface shapes, offering reliable data for assessing their anti-laser-damage performance.
To improve the anti-laser damage performance of one-dimensional (1D) subwavelength gratings (SWGs), this paper proposes to reasonably reduce the peak electric field at the grating ridges to further reduce the laser damage caused by the electric field contribution. Based on Maxwell’s equations, the equations for solving the field intensity of the near-field distribution of the dielectric materials are derived. The numerical simulation theoretical model is described. A 1064 nm laser in the –y direction irradiates the geometric surfaces under two perpendicular polarization directions: perpendicular to the grating ridges (transverse magnetic wave (TM) or x-polarization) and parallel to the grating ridges (transverse electric wave (TE) or z-polarization). We discuss the effects of the profile shape, structural parameters and refractive index of the material on the near-field distribution at the 1D SWG ridges by using a finite element method (FEM). The near-field distribution is sensitive to the x- and z-polarization of incident light. The near-field distribution of the 1D SWGs for TM waves is modulated by the surface, whereas that for TE waves is similar to the distribution of the bare substrate. The results show that the near-field distribution of 1D SWGs greatly depends on the laser polarization direction.
The laser-irradiated grating exhibits a unique damage morphology, and its surface geometry and period distribution significantly affect the laser-induced damage threshold (LIDT). Understanding the formation mechanism of this damage morphology can help in achieving higher LIDT gratings. The laser-induced damage threshold (LIDT) of the grating was measured to be 15.3 J/cm² under 1064 nm, 10 ns pulsed laser irradiation according to the ISO 21254 standard. Through finite element analysis, we simulated the ensuing temperature and thermal stress fields. The results identify interfacial thermal stress as the primary driver of damage. The model qualitatively reproduces the characteristic hexagonal damage morphology observed in experiments, revealing a thermo-mechanical shaping process. These findings provide critical insight into the damage evolution in nanostructured surfaces and offer guidance for the design of high-LIDT optical gratings.
Their opto-thermo-mechanical response fundamentally constrains the reliability of dielectric metasurfaces under high-power laser irradiation. In this study, we systematically investigate the thermomechanical behavior of cylindrical fused silica metastructures under nanosecond pulsed laser irradiation using a fully coupled multiphysics finite element model. Our results reveal that the maximum temperature exhibits a nonlinear oscillatory dependence on the cylinder height, attributed to Mie-type optical resonances, while the maximum thermal stress decays with increasing height in accordance with Saint-Venant’s principle. These findings provide a theoretical basis for designing laser-resistant metasurfaces through geometric optimization.