A high-performance acetone sensor utilizing an emerging indispensable V 4 C 3 T x MXene is described via combining experimental results with theoretical study.
Various techniques have been utilized in experiments to evaluate the performance of photocatalysts and to understand the corresponding catalytic mechanism. However, it is still challenging to demonstrate the phenomenon in detail during the catalytic process in experiments to fundamentally understand the catalytic mechanism. Density function theory (DFT) is an excellent technique to solve this problem at the level of electrons and atoms. However, the evaluation procedure for photocatalysts based on DFT calculations was unclear. Thus, in this work, we propose an evaluation procedure for photocatalysts for the degradation of volatile organic compounds (VOCs) from the point of view of DFT calculations through the following aspects: (i) the band structure of photocatalysts, including the band gap, capability of photoadsorption and the positions of the conduction band (CB) and valence band (VB); (ii) the adsorption of H2O, O2 or other oxidants; (iii) the adsorption of pollutants; (iv) the reaction pathway for pollutant degradation. To demonstrate the application of the proposed evaluation procedure, g-C3N4 dots/graphene is taken as an example to evaluate its photocatalytic performance. The results show that g-C3N4 dots/graphene has enhanced visible light absorption with significantly reduced height for photoelectron excitation and the photoelectron migrates between the parts of the heterostructure, from the valence band of the g-C3N4 dots to the graphene layer, and then to the conduction band of the g-C3N4 dots, which promotes light adsorption and induces the generation of electron–hole pairs with a low recombination rate. In addition, both the adsorbed H2O and O2 have strong interactions with g-C3N4 dots/graphene, inducing activation to form ˙OH and ˙O2− radicals to attack and degrade the adsorbed VOCs. Therefore, a procedure to evaluate the performance of photocatalysts for VOCs degradation based on DFT calculations is proposed in this work, and the evaluation procedure is successfully applied to predict the high photocatalytic performance of g-C3N4 dots/graphene, where a unique photoelectron excitation pathway is also demonstrated within the heterostructure.
Bioaerosol can cause the spread of disease, and therefore, capture and inactivation of bioaerosols is desirable. However, filtration systems can easily become blocked, and are often unable to inactivate the bioaerosol once it is captured. Herein, we reported a bioinspired artificial spider silk (ASS) photocatalyst, consisting of a periodic spindle structure of TiO2 on nylon fiber that can efficiently capture and concentrate airborne bacteria, followed by photocatalytic inactivation in situ, without a power-supply exhaust system. The ASS photocatalyst exhibits a higher capture capacity than the nylon fiber substrate and a photocatalytic inactivation efficiency of 99.99% obtained under 4 h irradiation. We found that the capture capacity of the ASS photocatalyst can be mainly attributed to the synergistic effects of hydrophilicity, Laplace pressure differences caused by the size of the spindle knots and surface energy gradients induced by surface roughness. The bacteria captured by the ASS photocatalyst are inactivated by photocatalysis within droplets or at the air/photocatalyst interfaces. This strategy paves the way for constructing materials for bioaerosol purification.
The development of atomically dispersed Pd site catalysts is attractive for maximizing metal utilization and reducing the dosage of Pd in the catalytic combustion of atmospheric volatile organic compounds (VOCs). Herein, we developed a scalable and economically feasible approach to prepare atomically dispersed palladium (Pd) sites on titanium substituted ordered mesoporous silica (Pd SSC/Ti-SBA-15) with an extremely low Pd loading (0.04 wt%). Characterization by AC-HAADF-STEM and in situ CO DRIFTS revealed the existence of isolated Pd sites in Pd SSC/Ti-SBA-15, and the Py-DRIFTS results demonstrated that the acidity of the catalyst was improved by doping with a small amount of Ti. The as-prepared Pd SSC/Ti-SBA-15 exhibited excellent catalytic activity (T90 = 270 °C) for cyclohexane combustion, exceeding that of Pd nanoparticles supported on Ti-SBA-15 with a high Pd loading amount (0.5 wt%) (T90 = 370 °C) and Pd SSC/SBA-15 without Ti substitution (T90 = 420 °C). Furthermore, Pd SSC/Ti-SBA-15 displayed remarkable catalytic activity toward cyclohexane, n-hexane and styrene combustion and maintained 100% mineralizaion after 10 h. The excellent catalytic activity of the resultant Pd SSC/Ti-SBA-15 catalyst might be attributed to the considerable amount of acid sites derived from Ti substitution for promoting VOC adsorption and the maximized Pd utilization realized by atomic Pd sites supported on Ti-SBA-15. This work provides a new route for the development of low-cost and high-performance Pd-based catalysts for VOC abatement.
Two-dimensional (2D) van der Waals (vdW) magnetic materials are considered to be ideal candidates for the fabrication of spintronic devices because of their low dimensionality, allowing the quantization of electronic states and more degrees of freedom for device modulation. With the discovery of few-layer Cr2Ge2Te6 and monolayer CrI3 ferromagnets, the magnetism of 2D vdW materials is becoming a research focus in the fields of material science and physics. In theory, taking the Heisenberg model with finite-range exchange interactions as an example, low dimensionality and ferromagnetism are in competition. In other words, it is difficult for 2D materials to maintain their magnetism. However, the introduction of anisotropy in 2D magnetic materials enables the realization of long-range ferromagnetic order in atomically layered materials, which may offer new effective means for the design of 2D ferromagnets with high Curie temperature. Herein, current advances in the field of 2D vdW magnetic crystals, as well as intrinsic and induced ferromagnetism or antiferromagnetism, physical properties, device fabrication, and potential applications, are briefly summarized and discussed.