To improve the mechanical and tribological properties of biomedical materials, biocompatible coatings are obtained on surfaces using various methods. In this study, ZrO2 thin films were deposited on CP-Ti material used as biomaterial by DC magnetron sputtering method. In this context, structural, mechanical, tribological and wettability properties of ZrO2 film coated on CP-Ti base material were investigated. X-ray diffraction method (XRD), scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) were used to characterize the crystallographic structure and surface morphology of the obtained film. Microhardness and wear tests were carried out to investigate the mechanical and tribological properties of the coatings. Additionally, contact angle measurements were made with pure water and ethylene glycol to determine the hydrophobicity and oleophobicity properties of the ZrO2 coated samples. The water contact angle and the oil contact angle of the film are 105.4° and 73.2, respectively. The results showed that ZrO2 coating film deposited on surfaces by DC magnetron sputtering method was more resistant to wear compared to bare CP-Ti.
In this study, a Ag/ZrO2 hybrid coating prepared by the sol–gel method on a β-type Ti45Nb alloy was applied by the spin coating technique, and the microstructural, mechanical, electrochemical, and tribological properties of the surface were evaluated in a multi-dimensional manner. The hybrid solution was prepared using zirconium propoxide and silver nitrate and stabilized through a low-temperature two-stage annealing protocol. The crystal structure of the coating was determined by XRD, and the presence of dense tetragonal ZrO2 phase and crystalline Ag phases was confirmed. SEM-EDS analyses revealed a compact coating structure of approximately 1.8 µm thickness with homogeneously distributed Ag nanoparticles on the surface. As a result of the electrochemical corrosion tests, it was determined that the open circuit potential shifted to more noble values, the corrosion current density decreased, and the corrosion rate decreased by more than 70% on the surfaces where the Ag/ZrO2 coating was applied. In the tribological tests, a decrease in the coefficient of friction, narrowing of wear marks, and significant reduction in surface damage were observed in dry and physiological (HBSS) environments. The findings revealed that the Ag/ZrO2 hybrid coating significantly improved the surface performance of the Ti45Nb alloy both mechanically and electrochemically and offers high potential for biomedical implant applications.
4 August 2025 in Metallurgical and Materials Transactions A