An intelligent fault diagnosis method based on optimal variational modal decomposition (VMD) and a convolutional neural network (CNN) is proposed to solve the problems of the early faults and typical fault characteristics of hydraulic pipe clamps in aero-engines. Firstly, a modified genetic algorithm is used to optimize the selection of variational modal decomposition parameters, and the optimized VMD is used to decompose the signal. Secondly, the IMF weight of CNN fusion feature information is used. Finally, the fault pattern recognition is carried out by CNN, so as to realize the intelligent fault diagnosis of an air hydraulic pipeline clamp. Experimental results show that this method can not only effectively clamp the health condition while the fault type is used to identify the accuracy, but can also realize the clamp early fault diagnosis. At the same time, through the clamp health status and test data analysis of typical fault status, we found that the typical fault characteristic frequency band provides a reference for the fault diagnosis of aerial hydraulic pipe circuit clamps.
Intelligent diagnosis of faults in an aero-hydraulic pipeline is important for condition monitoring of its systems. However, there are no more qualitative formulas or feature indicators to describe the faults of aero-hydraulic pipelines because of the complexity and diversity of aero-hydraulic pipeline systems, which leads to a very complex pipeline fault mechanism. In addition, although it is well known that the expression of interpretable and representable pipeline intelligent diagnosis models with pipeline fault characteristics are buried in high background noise and strong noise disturbance conditions in practical industrial scenarios, this has yet to be discussed. Inspired by the demand, this paper proposes a novel diagnosis strategy: the 1D-convolutional space-time fusion strategy for aero-engine hydraulic pipelines. Firstly, by optimizing the convolutional neural network and using it to design a one-dimensional convolutional neural network (1DCNN) with a wide input scale to expand the input field of perception, thereby obtaining more comprehensive spatial information of the pipeline data, which can effectively extract richer short sequence features. Secondly, a network of bidirectional gated recurrent Unit (Bi-GRU) is proposed, which integrates a short sequence of high-dimensional features for temporal information fusion, resulting in a certain degree of avoiding memory loss and gradient dispersion caused by the too-large step size. It is demonstrated that, for the noise signal and variable pressure signal, the fault identification accuracy approximated 95.9%, proving the proposed strategy’s robustness. By comparing with the other five methods, the proposed strategy has the ability to identify 10 different fault states in the aero-hydraulic pipeline with higher accuracy.
Aviation hydraulic pipelines are an important channel for power transmission in aviation hydraulic systems. Due to long-term exposure to complex vibration environments, hydraulic pipeline systems are susceptible to accumulated fatigue damage failure, which poses a great threat to aircraft safety and reliability. At present, there are only passive ways to reduce hydraulic pipeline vibration, such as adding vibration isolators and damping bearings. These methods have a poor vibration damping effect and are not safe. In this study, a hard coating was used as a new vibration reduction method for aviation hydraulic pipelines to reduce the damage caused by vibrations. For this purpose, three different hard-coating materials were optimally selected, and model creation, finite element analysis, and experimental research were carried out to study the vibration responses of hard-coated aviation hydraulic pipelines under the actual working conditions of an aircraft. The optimal solution was obtained through orthogonal experiments. The vibration reduction rate of the aviation hydraulic pipelines could reach 20.33% under the constant-frequency excitation of the low-pressure rotor of the engine, and the vibration reduction rate under the constant-frequency excitation of the high-pressure rotor could reach 26.60%. The rationality of the model was verified, and it was proven that the hard coating could meet the demands of vibration control in practical engineering and provide a reference for the vibration analysis and vibration control design of aviation hydraulic piping systems.
Aviation hydraulic clamp-piping systems often experience damage due to vibration, which poses a great threat to the reliability and safety of the aircraft. In this paper, a hard coating is used as a new damping method to study the vibration characteristics of aviation hydraulic clamp-piping systems. Three kinds of coated clamp entities are obtained by optimization and preparation, and the combination of finite element simulation and experiment is used to analyze the vibration response of the high- and low-pressure rotor under fixed-frequency simple harmonic excitation, and the resonance response under sweep-frequency excitation of the aviation hydraulic clamp-piping system. Through orthogonal experiments, it is clear that 304 stainless steel clamps coated with 200-μm-thick YSZ-PTFE coating have the best vibration damping effect on the clamp-piping system; that is, the damping rate can reach 24.67% under fixed-frequency excitation, and swept frequency damping can reach 19.93%. The maximum error between the simulation and the experimental vibration response amplitude is 7.9%, which proves the correctness of the model and verifies that the YSZ-PTFE hard coating can significantly improve the vibration damping effect with very good application prospects.
Accurate recognition of aero-engine pipeline faults is of great significance for engine maintenance costs and downtime. Pipeline signals have a strong periodic time series correlation under strong pump source pressure pulsation stimulation. However, very few studies have considered the correlation of features at pulsation period time points. Additionally, it is challenging to realize intelligent fault diagnosis of weak characteristics of pipeline faults due to the influence of vibration-noise coupling of aero-engines. The time information feature extraction model combined with self-attention mechanism (BT-SAM-Net), a newly created fault detection framework end-to-end time-series and anti-noise, is presented for the aero-pipeline in order to close the aforementioned research gaps. The primary goal of the proposed framework is to accomplish intelligent classification tasks by using the measured aero-pipeline raw data as the model input. Firstly, a two-way time series information fusion model is creatively designed, which is the first attempt to analyze the difference in time series correlation characteristics of faults for aero-pipelines. Secondly, The BT-SAM-Net framework incorporates the self-attention mechanism as an optimization tool to enhance the ultimate decision-making accuracy of the framework. Thirdly, the BT-SAM-Net framework was compared with 7 other methods. The results show the superiority and stability by demonstrating the BT-SAM-Net framework can identify various aero-pipeline fault states with greater accuracy.
Through the cracking failure analysis of dump truck frame with large electric wheel, the static and dynamic frame analysis of performance evaluation are conducted by the finite element analysis method. From the strength and stiffness analysis frame structure in the weak links, it is easy to find out crack the parts and the reasons with frame, and through the modal analysis and random vibration and fatigue strength analysis the danger frequency of the frame induced by road encourage is obtained, which can prevent the occurrence of frame cracks and provide a foundation for further optimization of the frame.