Choi Y, et al. J Korean Med Sci. 2023 Jan;38(7):e26. https://doi.org/10.3346/jkms.2023.38.e26

Lee SH, et al. J Korean Med Sci. 2019 Mar;34(13):e108. https://doi.org/10.3346/jkms.2019.34.e108

Rationale: The most common upper limb amputations are finger amputations, resulting in functional limitations that lead to problems with activities of daily living or job loss. For many years, prosthetic options for finger amputations have been limited to passive prostheses. In many countries including South Korea, body-powered finger prostheses have rarely been prescribed due to high cost, lack of experience of physicians and prosthetists, low interest and no coverage by insurance benefits. We report 2 cases of work-related finger amputations in patients who received body-powered 3D-printed finger prostheses. Patient concerns and diagnosis: Patient 1 was a 25-year-old woman with second and third finger amputations at the proximal interphalangeal level. Patient 2 was a 26-year-old man who sustained a second finger amputation at proximal interphalangeal level. Interventions: We created body-powered 3D-printed finger prostheses that mimicked distal interphalangeal joint motion through patient-driven metacarpophalangeal joint motion using a string connected to a wrist strap and a linkage system. The source code “Knick Finger” was downloaded from e-NABLE. Outcomes: After 1 month of prosthesis training, both patients were satisfied with the prostheses and showed improved performance in patient-derived goals of cooking (patient 1) and typing on a computer (patient 2). Lessons: Over the past decade, significant advances have been made in 3D-printed prosthetics owing to their light weight, low cost, on-site fabrication, and easy customization. Although there are still several limitations in the general application of 3D-printed finger prostheses, our study suggests that for patients with finger amputations, body-powered 3D-printed finger prostheses have high potential as an additional prosthetic option to the existing passive cosmetic prostheses.

This study examined how meeting the medical needs of injured workers after initial treatment may affect their return to work, using data from the Panel Study of Workers’ Compensation Insurance. This study was designed as a longitudinal study, which used data from the second-year, follow-up survey conducted in the secondary cohort of the Panel Study of Workers’ Compensation Insurance. The odds ratio (OR) and 95% confidence interval were estimated through binomial and multinomial logistic regression analyses to examine the effects of unmet medical needs on workers’ return to original work and return to work overall (including reemployment). The returned to original work OR of workers whose rehabilitation needs were met was 1.35 (1.12–1.63) while the return to work OR was 1.20 (1.03–1.41). The returned to original work OR of workers whose medical needs were met was 1.64 (1.18–2.27) while the return to work OR was 1.39 (1.07–1.80). In terms of disability rating, the return to work ORs of workers with mild disabilities whose medical/rehabilitation needs were not met and those of workers without disabilities were 1.71 (1.17–2.49) and 1.97 (1.27–3.08), respectively. In the case of regular/temporary workers, the returned-to-work ORs of workers whose medical/rehabilitation needs were not met were 1.54 (1.12–2.13) and 1.27 (1.03–1.56), respectively. For workers who sustained work-related injuries, providing medical accessibility and meeting rehabilitation needs were found to be important predictors of return to work after initial treatment.

The research, which was designed as a “pre- and post-single group” study, included patients with lower-limb amputation and aimed to evaluate the effectiveness of self-directed physical-strength training and cardiovascular exercise using a novel digital healthcare management service three times a week for 12 weeks. Muscle strength, thigh circumference, lipid profile and glycated hemoglobin levels, pulmonary function, quality of life, and physical activity level were evaluated before and after the intervention, while satisfaction was measured after the study. Among the 14 included patients, the proportion of adherence to the physical-strength training and physical-strengthening activity were 85.2% and 75.8%, respectively. The level of satisfaction with the digital healthcare management system was high. Significant changes were observed in the muscle-strength tests (dominant grip power and muscle strength of knee flexion and extension of the intact side), thigh circumference, and glycated hemoglobin levels. Further, the quality-of-life score showed improvement, although without significant differences. Individualized exercise management using the novel digital healthcare management system for lower-limb amputees could induce interest in self-care and promote physical activity and healthy behavior. Through this effect, we can expect a reduction in the incidence of cardiovascular diseases, diabetes mellitus, dyslipidemia, and severe injuries from falling.

PurposeThis study aimed to evaluate the clinical applicability of a customised power wheelchair joystick using rapid prototyping with 3D modeling and printing technology within a rehabilitation centre for patients with cervical spinal cord injury.Materials and MethodsTwo male participants with tetraplegia following cervical-level spinal cord injury who had difficulty operating a powered wheelchair were recruited. The procedure of the joystick-making and training service consists of four steps: (1) driving evaluation; (2) digital fabrication; (3) functional test; and (4) driving training. K-QUEST 2.0 (Korean-Quebec User Evaluation of Satisfaction version 2.0) was used to measure the usability of the off-the-shelf and customised joystick.ResultsDuring the application process, several redesign stages were required to obtain the final customised joystick. After participants attended a 30-min driving training five times per week for 8 weeks, the usability of the customised joystick was higher than that of the off-the-shelf one.ConclusionProviding the customised joystick-making and training service can be used in hospitalised rehabilitation centre before the hospital discharge of patients and returns to their everyday lives. 3D printing technology in rehabilitation clinics can provide new benefits, including cost-effectiveness, customisation of assistive devices, higher productivity, and enhanced collaboration with clients. More specifically, the entire intervention process, from medical evaluation, designing and manufacturing the devices, and training the client, can be performed efficiently and quickly by rehabilitation practitioners who best understand the client's characteristics.This study aimed to confirm the clinical applicability of a quick and efficient service for a customised power wheelchair joystick using 3D modelling and printing technology in rehabilitation centres for patients with cervical spinal cord injury. This study is expected to provide clinical support for connecting potential users and practitioners with technological advancements.