Dong Kyun Woo

Dr. Dong Kyun Woo

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 January 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
HPHyeon-Jeong Park
Hyeon-Jeong Park
HJHyun-Kyo Jung
Hyun-Kyo Jung
SJSang-Yong Jung
Sang-Yong Jung
YCYoung-Hoon Chae
Young-Hoon Chae
DWDong Kyun Woo
Dong Kyun Woo
This paper employs an overhang structure for axial flux permanent magnet motor to enhance the torque density. However, the overhang structure requires a computationally expensive 3-D finite-element method (FEM) for analysis, because a quasi-3-D FEM cannot be applied to such a geometry. Thus, in order to reduce the computational cost of above-mentioned topology, this paper adopts a field reconstruction method (FRM). The conventional FRM is applicable only in the case, where the slot pitch to teeth length ratio is the same along radial direction. To address this problem, we introduce a virtual air gap concept so that it can take into account parallel slot effect as well as overhang effect. In this paper, the effectiveness of the proposed method is verified by the 3-D FEM and experimental results.

15 September 2022 in IEEE Access
Verified
Journal Article
Open access
KKKi-hoon Kim
Ki-hoon Kim
DWDong Kyun Woo
Dong Kyun Woo
This paper presents a characteristic analysis of axial flux permanent magnet machines (AFPMMs) for in-wheel electric vehicles. Preferentially, a novel quasi-3-D model is developed for the fast and accurate design of AFPMMs. In electromagnetic field analysis, combined with field reconstruction method, the computation time of 2-D solutions is significantly reduced. With the use of time sweeping of the basis function, only the static finite element (FE) analysis is performed to calculate the air-gap flux distribution at the entire rotor position, whereas the conventional 2-D solutions require a transient FE analysis. In the shape sweeping process of the basis function, the virtual air-gap section method is introduced to take into account that the ratio of slot opening to slot pitch is different depending on the radius of analysis plane, which causes errors in the analysis results of the conventional quasi-3-D method. The virtual air-gap sections are obtained by interpolation of the spatial field between the mapped cylindrical planes. The proposed technique reduces the number of 2-D analysis planes required for high accuracy in the conventional quasi-3-D method, and it can also predict the air-gap magnetic flux distribution for skewed permanent magnets without additional FE analysis. Finally, using the magnetic fields calculated in the proposed method, the electromagnetic performances of the AFPMM are calculated, such as load torque, cogging torque, attraction force, and back-EMF. The analysis results were verified by comparison with the measurement results.

28 February 2022 in Electronics
Verified
Journal Article
Open access
PDF file
IHIFTIKHAR HUSSAIN
IFTIKHAR HUSSAIN
DWDong Kyun Woo
Dong Kyun Woo
In this paper, an analytical calculation of the inductance of an air-core planar spiral coil is presented. The inner and outer radius of the planar spiral coil is determined from the general equation of the filament of the wire. Using the Neumann integral formula, the expression of inductance is obtained. The double integral of Neumann’s formula is computed numerically to evaluate the inductance. The accuracy of the calculation results is verified by comparing it with the conventional and the simulation results. Different geometry of spiral coils is fabricated to validate it experimentally. Finally, the comparison is performed with the experiment results, which show good agreement. Thus, the accuracy of the calculation result paves the way for designing and optimizing the spiral coil for electromagnetic applications.

16 February 2022 in Sensors
Verified
Journal Article
Open access
PDF file
IHIFTIKHAR HUSSAIN
IFTIKHAR HUSSAIN
DWDong Kyun Woo
Dong Kyun Woo
In this paper, a simplified method for the calculation of a mutual inductance of the planar spiral coil, motivated from the Archimedean spiral, is presented. This method is derived by solving Neumann’s integral formula in a cylindrical coordinate system, and a numerical tool is used to determine the value of mutual inductance. This approach can calculate the mutual inductances accurately at various coaxial and non-coaxial distances for different coil geometries. The calculation result is compared with the 3D finite element analyses to verify its accuracy, which shows good consistency. Furthermore, to confirm it experimentally, Litz wire is used to fabricate the sample spiral coils. Finally, the comparison of a simplified method is also studied relative to the coupling coefficient. The accuracy of the calculation results with the simulation and the measurement results makes it a good candidate to apply it in wireless power applications.

30 December 2021 in Energies
Verified
Journal Article
Open access
PDF file
IHIFTIKHAR HUSSAIN
IFTIKHAR HUSSAIN
DWDong Kyun Woo
Dong Kyun Woo
In this paper, a new method to calculate the self-inductance of the Archimedean spiral coil is presented. The proposed method is derived by solving Neumann’s integral formula, and the numerical tool is used to calculate the inductance value. The calculation results are verified with several conventional formulas derived from the Wheeler formula or its modified form and 3D finite element analyses. The comparison with simulation results shows that the conventional formula has an error of above 40% compared to the proposed method, which has below 7% when the wire diameter is reduced. To further check the validity, different sizes of the spiral coil are fabricated by changing the geometrical parameters such as the number of turns, turn spacing, inner radius, outer radius, and wire diameter. Litz wire is chosen for making the spiral coil, and bobbins are made using a 3D printer. Finally, the calculation results are compared with the experimental result. The error between them is less than 2%. The comparison with the conventional formulas, simulation, and measurement results shows the accuracy of the proposed method. This method can be used to calculate the self-inductance of wireless power coils, inductors and antenna design.

2 February 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
JLJae-Gil Lee
Jae-Gil Lee
NHNae-Won Hwang
Nae-Won Hwang
HRHee-Rak Ryu
Hee-Rak Ryu
HJHyun-Kyo Jung
Hyun-Kyo Jung
DWDong Kyun Woo
Dong Kyun Woo
In the design of an electric machine, it is necessary for the designer to complete a robust design. The design parameters may be subjected to the uncertainty such as manufacturing tolerance, or deviation of the material characteristic. Any perturbation in a design parameter can lead to an unpredictable characteristic. This effect can be detected through a post process, such as a sensitivity analysis. In order to increase the numerical efficiency, this paper presents a new algorithm to evaluate the robustness in a candidate solution. It has a unique advantage in that the proposed algorithm can measure and control the extent of robustness according to the problem to be applied. The usefulness of the proposed algorithm is verified by means of the mathematical test function and the optimal overhang design of the surface permanent-magnet motor. The proposed method provides a new alternative as the decision maker of robustness in the robust optimization problem.