Polydimethylsiloxane (PDMS) is an elastomer with excellent optical, electrical and mechanical properties, which makes it well-suited for several engineering applications. Due to its biocompatibility, PDMS is widely used for biomedical purposes. This widespread use has also led to the massification of the soft-lithography technique, introduced for facilitating the rapid prototyping of micro and nanostructures using elastomeric materials, most notably PDMS. This technique has allowed advances in microfluidic, electronic and biomedical fields. In this review, an overview of the properties of PDMS and some of its commonly used treatments, aiming at the suitability to those fields’ needs, are presented. Applications such as microchips in the biomedical field, replication of cardiovascular flow and medical implants are also reviewed.

At the end of 2019, the coronavirus appeared and spread extremely rapidly, causing millions of infections and deaths worldwide, and becoming a global pandemic. For this reason, it became urgent and essential to find adequate tests for an accurate and fast diagnosis of this disease. In the present study, a systematic review was performed in order to provide an overview of the COVID-19 diagnosis methods and tests already available, as well as their evolution in recent months. For this purpose, the Science Direct, PubMed, and Scopus databases were used to collect the data and three authors independently screened the references, extracted the main information, and assessed the quality of the included studies. After the analysis of the collected data, 34 studies reporting new methods to diagnose COVID-19 were selected. Although RT-PCR is the gold-standard method for COVID-19 diagnosis, it cannot fulfill all the requirements of this pandemic, being limited by the need for highly specialized equipment and personnel to perform the assays, as well as the long time to get the test results. To fulfill the limitations of this method, other alternatives, including biological and imaging analysis methods, also became commonly reported. The comparison of the different diagnosis tests allowed to understand the importance and potential of combining different techniques, not only to improve diagnosis but also for a further understanding of the virus, the disease, and their implications in humans.

The diagnosis of several diseases can be performed by analyzing the blood plasma of a patient. Despite extensive research work, there is still a need to improve current low-cost fabrication techniques and devices for the separation of plasma from blood cells. Microfluidic biomedical devices have great potential for that process. Hence, a microfluidic device made by micromilling and sealed with an oxygen plasma technique was tested by means of two different blood analogue fluids. The device has four microchannels with similar geometries but different channel depths. A high-speed video microscopy system was used for the visualization and acquisition of the flow of the analogue fluids throughout the microchannels of the device. Then, the separation of particles and plasma was evaluated with the ImageJ software by measuring and comparing the grey values at the entrance and the exit of the channel. The device showed a significant reduction of the amount of cells between the entrance and the exit of the microchannels. The depth of the channels and the size of the particles were not found to exert any major influence on the separation process. However, it was found that the flow rate affected the separation results, as the best results were obtained for a flow rate of 100 μL/min. Though these results are promising, further analyses and optimizations of microfluidic devices, as well as comparisons between devices sealed using different methods such as the solvent bonding technique, will be conducted in future works.