Pipe vibration induced by water hammer frequently emerges in water conveyance system, especially in the hydropower plant or pumped storage power station with long diversion pipelines. This vibration in turn affects the hydraulic pulsation so that undesired fluid-structure interaction (FSI) arises. In this research, attention is given to a pipeline embedded in concrete. A six-equation model was derived to describe the fluid-pipe-concrete interaction considering Poisson coupling and junction coupling. With the elastic and homogeneous hypotheses, an iterative approach was proposed to solve this model, and the results were validated by experiment and classical water-hammer theory. Then dynamic FSI responses to water hammer were studied in a reservoir-pipe-valve physical system. Hydraulic pressure, pipe wall stress and axial motion were discussed with respect to different parameters of concrete. Results obtained by the two-equation model, four-equation model and six-equation model show characteristics of pressure wave and stress wave separately with and without FSI.

This paper aims to study the natural heat dissipation capacity of a hydraulic tank during its miniaturization revolution. A theoretical model of heat dissipation was built up on the basis of experimental analysis. Then, the natural heat dissipation power was deduced and shown to be relevant. Influencing factors were analyzed, which were the oil height proportion, design proportion, volume, material type, and wall thickness. The results showed that the heat dissipation power is proportional to the height of the oil in the tank. The power increases with the height proportional coefficient k2, while it first decreases and then increases with the length proportional coefficient k1. The lengthwise coefficient obviously has a more significant effect. The influence degree of reduction methods on natural heat dissipation is in the following order: length reduction > equal proportion reduction > height reduction > width reduction. Additionally, when the thermal conductivity λ is greater than 10 W/(m·K), the material and wall thickness of the tank slightly influence the heat dissipation capacity; otherwise, the influence is evident.