A high temperature-sensitive long-period fiber grating (LPFG) sensor fabricated by the local fictive temperature modification is proposed and demonstrated. High-frequency CO₂ laser pulses scan standard single-mode fiber (SMF), and the modification zones extended to the core of SMF. Experimental results demonstrate that the LPFG temperature sensors with 600 μm grating period and 32 period numbers offer the average sensitivity of 0.084 nm/C in the temperature range of room temperature (RM) to 875°C. The LPFGs fabricated here show exponential change in terms of the spectral wavelength shift versus changes in temperature. In addition, the maximum temperature sensitivity of 0.37 nm/C is achieved by employing long-period microfiber grating (LPMFG), fabricated by the microheater brushing technique and the local fictive temperature modification. LPMFG sensor exhibits better temperature characteristics due to a thinner diameter.

The impact of airborne molecular contaminants (AMCs) on the lifetime of fused silica UV optics in high power lasers (HPLs) is a critical issue. In this work, we demonstrated the on-line monitoring method of AMCs concentration based on the Sagnac microfiber structure. In the experiment, a Sagnac microfiber loop with mesoporous silica coating was fabricated by the microheater brushing technique and dip coating. The physical absorption of AMCs in the mesoporous coating results in modification of the surrounding refractive index (RI). By monitoring the spectral shift in the wavelength domain, the proposed structure can operate as an AMCs concentration sensor. The sensitivity of the AMCs sensor can achieve 0.11 nm (mg/m³). By evaluating the gas discharge characteristic of four different low volatilization greases in a coarse vacuum environment, we demonstrated the feasibility of the proposed sensors. The use of these sensors was shown to be very promising for meeting the requirements of detecting trace amounts of contaminants.