Nuclear gamma-resonance spectroscopy on ⁵⁷Fe nuclei, X-ray diffraction, and scanning electron microscopy have been used to study the narrow fractions of fly ash formed after combustion of the Ekibastuz coal. Two groups of samples of magnetic (ferrospheres) and non-magnetic type have been separated by granulometric and magnetic separation. A number of regularities associated with the granules size of fly ash have been established. According to the data of Mössbauer spectroscopy, a decrease in the magnetically ordered contribution has been identified with the growth of the particle size. After magnetic separation, iron in ferrospheres was found mainly in the structure of Fe₃O₄/γ-Fe₂O₃ and α-Fe₂O₃. The dominant phase was Fe₃O₄ (60–77%), the amount of which decreases with the growth of the grain size. With the growth of the particle size, the ratio of [Fe]^tetra/[Fe]^octa positions occupancy in Fe₃O₄ approaches 0.5; the structure of magnetite tends to the stoichiometric composition. α-Fe was found in the composition of ferrospheres, and a mechanism of its formation was proposed. The main components of the non-magnetic fractions of fly ash are mullite, hercynite, and silicate glass.

Mössbauer spectroscopy and X-ray diffraction have been used to study samples of fly ashes formed after combustion of coal from the Ekibastuz basin at the thermal power plants TPP-2 and TPP-3 in Almaty (Kazakhstan). It has been established that the fractions of fly ashes contain iron in the form of magnetite Fe₃O₄ and hematite α-Fe₂O₃. The mixed valence of iron Fe³⁺ ↔ Fe²⁺ in the octahedral sublattice of magnetite is destroyed by isostructural substitution impurities. Maghemite γ-Fe₂O₃ is additionally present in the fly ash of TPP-3 as a product of magnetite slow oxidation. It was shown that at T ≥ 1400 °C the proportion of magnetite in fly ashes increases due to decomposition of hematite, maghemite, hercynite and the drop of iron content in mullite. It was concluded that the amount of iron in magnetite is a temperature indicator of fly ashes formation. The parameters of hyperfine interactions have been determined in the iron-containing minerals of fly ashes. It was identified that formation of the fly ashes structure occurs in oxidizing atmosphere, since no traces were revealed of reducing environment effect on the phase composition.

The bauxite ores of Kazakhstan were analyzed using Mössbauer spectroscopy, X-ray diffraction and an X-ray fluorescence analysis. Experimental data on the structural–phase composition of bauxites were obtained, and the features of the iron-bearing minerals within them were revealed. The studied bauxites were high in iron. The magnetic part of bauxite was mainly represented by aluminohematite with a concentration of C_Al = 3.34–5.73 at.%, alongside goethite in small amounts. The predominant phase in the bauxite samples was the alumina-bearing mineral gibbsite with a well-crystallized monoclinic lattice. The main siliceous mineral of bauxite is kaolinite, which showed distorted octahedral positions in a number of samples. Siderite amounts were found to vary in the range of 0–15 at.% in the present iron-bearing minerals. Ilmenite was also present in the bauxite of some deposits; anatase was found in all bauxites and was the final product of ilmenite decomposition in the weathering crust.

The effect of implanting ⁵⁷Fe ions on the crystal structure of Nb–Zr alloys has been studied using Mössbauer spectroscopy on ⁵⁷Fe nuclei and X-ray diffraction. As a result of implantation, a metastable structure was formed in the Nb–Zr alloy. The XRD data indicated a decrease in the crystal lattice parameter of niobium; that is, there was a compression of the niobium planes when implanted with iron ions. Mössbauer spectroscopy revealed three states of iron. The singlet indicated a supersaturated Nb(Fe) solid solution; the doublets characterized the diffusion migration of atomic planes and crystallization of voids. It was shown that the values of the isomer shifts in all three states did not depend on the implantation energy, which indicates the invariance of the electron density on the ⁵⁷Fe nuclei in the studied samples. The resonance lines of the Mössbauer spectra were significantly broadened, which is typical for materials with low crystallinity and a metastable structure that is stable at room temperature. The paper discusses the mechanism of radiation-induced and thermal transformations in the Nb–Zr alloy, which leads to the formation of a stable well-crystallized structure. A Fe₂Nb intermetallic compound and the Nb(Fe) solid solution formed in its near-surface layer, while Nb(Zr) remained in the bulk.

Studies of the mineralogical composition were carried out, and the features of the clays from the deposits of Kazakhstan were established using Mössbauer spectroscopy (MS) and X-ray diffraction analysis (XRD). According to the XRD results, all the samples were mixed-layer clays of the kaolinite–illite type. The lattice parameters of the kaolinite were determined, and it was shown that its structure was disordered and contained a certain amount of impurity in some of the clay samples. A special feature of two of the samples was the additionally identified muscovite polytype 2M₁. The spectra of the iron-containing clays were amenable to being resolved into separate components, with similar Mössbauer parameters of the kaolinite, muscovite, illite, and glauconite. The oxidation state of the iron was determined using MS. The predominant part of paramagnetic iron in most samples was in the trivalent state. The primary minerals contributing to Fe²⁺ were illite and muscovite. The results obtained during the study of the clay samples with complex mineralogical compositions using MS and XRD methods both complemented one another and were found to be in good agreement.

The main problem at the oil and gas field is hard-to-recover reserves. The article discusses promising modern methods of increasing oil recovery. The analysis of widely used methods of extraction of hard-to-recover oil and gas reserves is carried out. The Mossbauer studies of the domestic natural mineral raw materials of proppants based on bauxite and aluminum oxides were carried out in order to study the structural and phase features of these materials. Proppants used in hydraulic fracturing to hold cracks play an important role in the oil and gas industry. The Moessbauer method is a powerful tool for studying the structure and electronic state of atoms in materials. It is based on the phenomenon of nuclear gamma resonance absorption and provides information about the chemical environment of the nucleus. In this study, proppants based on bauxite and aluminum oxides were used, which were subjected to a Mossbauer analysis.