Wenjie Zhang

Dr. Wenjie Zhang

Chinese Academy of Meteorological Sciences, Beijing, China
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 November 2023 in Geoscientific Model Development
Verified
Journal Article
Open access
PDF file
WJWenxing Jia
Wenxing Jia
XZXiaoye Zhang
Xiaoye Zhang
HWHong Wang
Hong Wang
YWYaqiang Wang
Yaqiang Wang
DWDeying Wang
Deying Wang
YLYi Lin
Yi Lin
The optimal choice of the planetary boundary layer (PBL) parameterization scheme is of particular interest and urgency to a wide range of scholars, especially for many works involving models. At present, there have been many works to evaluate the PBL schemes. However, little research has been conducted into a more comprehensive and systematic assessment of the performance capability of schemes in key regions of China, especially when it comes to the differences in the mechanisms of the schemes themselves, primarily because there is scarcely sufficient observational data, computer resources, and storage support to complete the work. In this companion paper (i.e., Part 1), four typical schemes (i.e., YSU, ACM2, BL, and MYJ) are selected to systematically analyze and evaluate near-surface meteorological parameters, PBL vertical structure, PBL height (PBLH), and turbulent diffusion coefficient (TDC) in five key regions of China (i.e., North China Plain, NCP; Yangtze River Delta, YRD; Sichuan Basin, SB; Pearl River Delta, PRD and Northwest Semi-arid region, NS) in different seasons (i.e., January, April, July, and October). The differences in the simulated 2 m temperatures between the nonlocal closure schemes are mainly affected by the downward shortwave radiation, but to compare the nonlocal closure schemes with the local closure schemes, the effect of sensible heat flux needs to be further considered. The 10 m wind speed is under the influence of factors like the momentum transfer coefficient and the integrated similarity functions at night. The wind speeds are more significantly overestimated in the plains and basin, while less overestimated or even underestimated in the mountains, as a result of the effect on topographic smoothing in the model. Moreover, the overestimation of small wind speeds at night is attributable to the inapplicability of the Monin–Obukhov similarity theory (MOST) at night. The model captures the vertical structure of temperature well, while the wind speed is outstandingly overestimated below 1000 m, largely because of the TDC. The difference between the MOST and the mixing length theory, PBLH, and Prandtl number is cited as the reason for the difference between the TDC of the YSU and ACM2 schemes. The TDCs of the BL and MYJ schemes are affected by the mixing length scale, which of BL is calculated on the basis of the effect of buoyancy, while MYJ calculates it with the consideration of the effect of the total turbulent kinetic energy. The PBLH of the BL scheme is better than the other schemes because of the better simulation results of temperature. In general, to select the optimal scheme, it is necessary to offer different options for different regions with different focuses (heat or momentum). The first focus is on the temperature field. The BL scheme is recommended for January in the NCP region, especially for Beijing, and the MYJ scheme is better for the other 3 months. The ACM2 scheme would be a good match for the YRD region, where the simulation differences between the four schemes are small. The topography of the SB region is more complex, but for most of the areas in the basin, the MYJ scheme is proposed, and if more stations outside the basin are involved, the BL scheme is recommended. The MYJ scheme is applied to the PRD region in January and April, and the BL scheme in July and October. The MYJ scheme is counseled for the NS region. The second focus is the wind field. The YSU scheme is recommended if the main concern is the near-surface layer, and the BL scheme is suggested if focusing on the variation in the vertical direction. The final evaluation of the parameterization scheme and uncertainties will lay the foundation for the improvement of the modules and forecasting of the GRAPES_CUACE regional model developed independently in China.

30 November 2022 in Atmospheric Chemistry and Physics
Verified
Journal Article
Open access
PDF file
WZWenjie Zhang
Wenjie Zhang
HWHong Wang
Hong Wang
XZXiaoye Zhang
Xiaoye Zhang
LHLiping Huang
Liping Huang
YPYue Peng
Yue Peng
HCHuizheng Che
Huizheng Che
The representation of aerosol–cloud interaction (ACI) and its impacts in the current climate or weather model remains a challenge, especially for severely polluted regions with high aerosol concentration, which is even more important and worthy of study. Here, ACI is first implemented in the atmospheric chemistry model GRAPES_Meso5.1/CUACE by allowing for real-time aerosol activation in the Thompson cloud microphysics scheme. Two experiments are conducted focusing on a haze pollution case with coexisting high aerosol and stratus cloud over the Jing–Jin–Ji region in China to investigate the impact of ACI on the mesoscale numerical weather prediction (NWP). Study results show that ACI increases cloud droplet number concentration, water mixing ratio, liquid water path (CLWP), and optical thickness (COT), as a result improving the underestimated CLWP and COT (reducing the mean bias by 21 % and 37 %, respectively) over a certain subarea by the model without ACI. A cooling in temperature in the daytime below 950 hPa occurs due to ACI, which can reduce the mean bias of 2 m temperature in the daytime by up to 14 % (∼ 0.6 ∘C) in the subarea with the greatest change in CLWP and COT. The 24 h cumulative precipitation in this subarea corresponding to moderate-rainfall events increases, which can reduce the mean bias by 18 %, depending on the enhanced melting of the snow by more cloud droplets. In other areas or periods with a slight change in CLWP and COT, the impact of ACI on NWP is not significant, suggesting the inhomogeneity of ACI. This study demonstrates the critical role of ACI in the current NWP model over the severely polluted region and the complexity of the ACI effect.

25 July 2023 in Atmospheric Chemistry and Physics
Verified
Journal Article
Open access
PDF file
YPYue Peng
Yue Peng
HWHong Wang
Hong Wang
XZXiaoye Zhang
Xiaoye Zhang
ZLZhaodong Liu
Zhaodong Liu
WZWenjie Zhang
Wenjie Zhang
HCHuizheng Che
Huizheng Che
Although China's air quality has substantially improved in recent years due to the vigorous emissions reduction, the Beijing–Tianjin–Hebei (BTH) region, especially its central and southern plains at the eastern foot of the Taihang Mountains, has been the most polluted area in China, with persistent and severe haze in winter. Combining meteorology–chemistry coupled model simulations and multiple observations, this study explored the causes of several heavy haze events in this area in January 2017, focusing on local circulations related to mountain terrain. The study results showed that on the weather scale, the configuration of the upper, middle, and lower atmosphere provided favorable weather and water vapor transport conditions for the development of haze pollution. Under the weak weather-scale systems, local circulation played a dominant role in the regional distribution and extreme values of PM2.5. Influenced by the Taihang and Yanshan mountains, vertical circulations and wind convergence zone were formed between the plain and mountain slopes. The vertical distribution of pollutants strongly depended on the intensity and location of the circulation. The circulation with high intensity and low altitude was more unfavorable for the vertical and horizontal diffusion of near-surface pollutants. More importantly, we found that the aerosol–radiation interaction (ARI) significantly amplified the impacts of local vertical circulations on heavy haze by two mechanisms. First, the ARI strengthened the vertical circulations at the lower levels, with the zonal wind speeds increasing by 0.3–0.8 m s−1. Meanwhile, the ARI could cause a substantial downward shift in the vertical circulations (∼ 100 m). Second, the ARI weakened the horizontal diffusion of pollutants by reducing the westerly winds and enhancing wind convergence and southerly winds. Under these two mechanisms, pollutants could only recirculate in a limited space. This superposition of the typical local circulation and the ARI eventually contributed to the accumulation of pollutants and the consequent deterioration of haze pollution in the region.

7 January 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
YLYuanxin Liang
Yuanxin Liang
HCHuizheng Che
Huizheng Che
HWHong Wang
Hong Wang
WZWenjie Zhang
Wenjie Zhang
Lei LiLei Li
Lei Li
XZXiaoye Zhang
Xiaoye Zhang
Aerosols can affect vertical thermal structure during heavily polluted episodes (HPEs). Here, we selected four typical HPEs in 2018, which were further subdivided into dust and haze events. The vertical distribution of aerosols extinction coefficient (EC) and variations in columnar optical properties were investigated based on sun-photometer and Lidar observation at an urban site in Beijing. The vertical characteristics in shortwave radiative heating rate (HR) of aerosols were studied using NASA/Goddard radiative transfer model along with observational data. In the haze episode, EC layer is less than 1.5 km and shows strong scattering, with single-scattering albedo (SSA440nm) of ~0.97. The heating effects are observed at the middle and upper atmosphere, and slight heating effects are found at the lower layer. The mean HR within 1.5 km can be up to 16.3 K day−1 with EC of 1.27 km−1, whereas the HR within 0.5 km is only 1.3 K day−1. In the dust episode, dust aerosols present the absorption with SSA440nm of ~0.88, which would heat the lower atmosphere to promote vertical turbulence, and the height of EC layer can be up to 2.0–3.5 km. In addition, the strong heating effects of dust layer produced cooling effects near the surface. Therefore, the accurate measurement of aerosols optical properties in HPEs is of great significance for modeling aerosols direct radiative effects.

6 May 2022 in Geophysical Research Letters
Verified
Journal Article
Open access
WZWenjie Zhang
Wenjie Zhang
XZXiaoye Zhang
Xiaoye Zhang
HWHong Wang
Hong Wang
The current capabilities of the numerical weather prediction (NWP) model to simulate aerosol‐radiation interaction (ARI) impacts on weather prediction are still rarely considered compared with climate models. Here, the NWP model GRAPES_CUACE is used to evaluate the role of the ARI in meteorology prediction at the weather scale in China. The results show that the online calculation of ARI in the model can extensively improve the meteorology prediction accuracy involving temperature, wind, and pressure at most vertical levels in relatively clean, light, and heavy pollution stages. This improvement significantly occurs in the meteorology factors below 950 hPa prediction such as temperature at 2 m, 1,000, and 950 hPa, and mean sea level pressure, particularly in heavy pollution areas and stages. Unlike temperature, the improvement of ARI in the predicted wind at the height of the boundary layer is more significant than near‐surface. However, this improvement declines when the low‐cloud exists.

25 July 2023 in Geoscientific Model Development
Verified
Journal Article
Open access
PDF file
SLSiting Li
Siting Li
PWPing Wang
Ping Wang
HWHong Wang
Hong Wang
YPYue Peng
Yue Peng
ZLZhaodong Liu
Zhaodong Liu
XZXiaoye Zhang
Xiaoye Zhang
Data assimilation techniques are one of the most important ways to reduce the uncertainty in atmospheric chemistry model input and improve the model forecast accuracy. In this paper, an ensemble optimal interpolation assimilation (EnOI) system for a regional online chemical weather numerical forecasting system (GRAPES_Meso5.1/CUACE) is developed for operational use and efficient updating of the initial fields of chemical components. A heavy haze episode in eastern China was selected, and the key factors affecting EnOI, such as localization length scale, ensemble size, and assimilation moment, were calibrated by sensitivity experiments. The impacts of assimilating ground-based PM2.5 observations on the model chemical initial field PM2.5 and visibility forecasts were investigated. The results show that assimilation of PM2.5 reduces the uncertainty in the initial PM2.5 field considerably. Using only 50 % of observations in the assimilation, the root mean square error (RMSE) of initial PM2.5 for independent verification sites in mainland China decreases from 73.7 to 46.4 µg m−3, and the correlation coefficient increases from 0.58 to 0.84. An even larger improvement appears in northern China. For the forecast fields, assimilation of PM2.5 improves PM2.5 and visibility forecasts throughout the time window of 24 h. The PM2.5 RMSE can be reduced by 10 %–21 % within 24 h, and the assimilation effect is the most remarkable in the first 12 h. Within the same assimilation time, the assimilation efficiency varies with the discrepancy between model forecasts and observations at the moment of assimilation, and the larger the deviation, the higher the efficiency. The assimilation of PM2.5 further contributes to the improvement of the visibility forecast. When the PM2.5 increment is negative, it corresponds to an increase in visibility, and when the PM2.5 analysis increment is positive, visibility decreases. It is worth noting that the improvement of visibility forecasting by assimilating PM2.5 is more obvious in the light-pollution period than in the heavy-pollution period. The results of this study show that EnOI may provide a practical and cost-effective alternative to the ensemble Kalman filter (EnKF) for the applications where computational cost is the main limiting factor, especially for real-time operational forecast.