BEOMJUN KIM

Mr. BEOMJUN KIM

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 April 2024
Verified
Conference Paper
Open access
SCSungjun Cho
Sungjun Cho
BKBEOMJUN KIM
BEOMJUN KIM
HCHyunuk Cho
Hyunuk Cho
GSGyeongseob Seo
Gyeongseob Seo
OMOnur Mutlu
Onur Mutlu
JPJisung Park
Jisung Park
This work investigates a new erase scheme in NAND flash memory to improve the lifetime and performance of modern solid-state drives (SSDs). In NAND flash memory, an erase operation applies a high voltage (e.g., > 20 V) to flash cells for a long time (e.g., > 3.5 ms), which degrades cell endurance and potentially delays user I/O requests. While a large body of prior work has proposed various techniques to mitigate the negative impact of erase operations, no work has yet investigated how erase latency should be set to fully exploit the potential of NAND flash memory; most existing techniques use a fixed latency for every erase operation which is set to cover the worst-case operating conditions. To address this, we propose Aero (Adaptive ERase Operation), a new erase scheme that dynamically adjusts erase latency to be just long enough for reliably erasing target cells, depending on the cells' current erase characteristics. Aero accurately predicts such near-optimal erase latency based on the number of fail bits during an erase operation. To maximize its benefits, we further optimize Aero in two aspects. First, at the beginning of an erase operation, Aero attempts to erase the cells for a short time (e.g., 1 ms), which enables Aero to always obtain the number of fail bits necessary to accurately predict the near-optimal erase latency. Second, Aero aggressively yet safely reduces erase latency by leveraging a large reliability margin present in modern SSDs. We demonstrate the feasibility and reliability of Aero using 160 real 3D NAND flash chips, showing that it enhances SSD lifetime over the conventional erase scheme by 43% without change to existing NAND flash chips. Our system-level evaluation using eleven real-world workloads shows that an AERO-enabled SSD reduces read tail latency by 34% on average over a state-of-the-art technique.

13 February 2025 in Electronics
Verified
Journal Article
Open access
PDF file
BKBEOMJUN KIM
BEOMJUN KIM
MKMyungsuk Kim
Myungsuk Kim
This work investigates a new erase scheme in NAND flash memory to improve the lifetime and performance of modern solid-state drives (SSDs). In NAND flash memory, an erase operation applies a high voltage (e.g., >20 V) to flash cells for a long time (e.g., >3.5 ms), which degrades cell endurance and potentially delays user I/O requests. While a large body of prior work has proposed various techniques to mitigate the negative impact of erase operations, no work has yet investigated how erase latency and voltage should be set to fully exploit the potential of NAND flash memory; most existing techniques use a fixed latency and voltage for every erase operation, which is set to cover the worst-case operating conditions. To address this, we propose Revisiting Erase Operation, (REO) a new erase scheme that dynamically adjusts erase latency and voltage depending on the cells’ current erase characteristics. We design REO by two key apporaches. First, REO accurately predicts such near-optimal erase latency based on the number of fail bits during an erase operation. To maximize its benefits, REO aggressively yet safely reduces erase latency by leveraging a large reliability margin present in modern SSDs. Second, REO applies near-optimal erase voltage to each WL based on its unique erase characteristics. We demonstrate the feasibility and reliability of REO using 160 real 3D NAND flash chips, showing that it enhances SSD lifetime over the conventional erase scheme by 43% without change to existing NAND flash chips. Our system-level evaluation using eleven real-world workloads shows that an REO-enabled SSD reduces average I/O performance and read tail latency by 12% and 38%, respectivley, on average over a state-of-the-art technique.

19 March 2024 in Eng
Verified
Journal Article
Open access
PDF file
BKBEOMJUN KIM
BEOMJUN KIM
GSGyeongseob Seo
Gyeongseob Seo
MKMyungsuk Kim
Myungsuk Kim
In order to successfully achieve mass production in NAND flash memory, a novel test procedure has been proposed to electrically detect and screen the channel hole defects, such as Not-Open, Bowing, and Bending, which are unique in high-density 3D NAND flash memory. Since channel hole defects lead to catastrophic failure (i.e., malfunction of basic NAND operations), detecting and screening defects in advance is one of the key challenges of guaranteeing the quality of flash products in the NAND manufacturing process. Based on analysis of the physical and electrical mechanisms of the channel hole defect, we have developed a two-step test procedure that consists of pattern-based and stress-based screen methodologies. By optimizing test patterns depending on the type of defect, the pattern-based screen is effective for detecting the type of Hard channel hole defects. The stress-based screen is carefully implemented to detect hidden Soft channel hole defects without degrading the reliability of NAND flash memory. In addition, we have attempted to further optimize the current version of our technique to minimize test time overhead, thus enabling 72.2% improvement in total test time. Experimental results using real 160 3D NAND flash chips show that our technique can efficiently detect and screen out various types of channel hole defects with minimum test time and negligible degradation in the flash reliability.

7 February 2023 in Electronics
Verified
Journal Article
Open access
PDF file
BKBEOMJUN KIM
BEOMJUN KIM
MKMyungsuk Kim
Myungsuk Kim
We propose a new NAND programming scheme called the lazy reprogramming scheme (LazyRS) which divides a program operation into two stages, where the second stage is delayed until it is needed. LazyRS optimizes the program latency by skipping the second stage if it is not required. An idle interval before the second stage improves the flash reliability as well. To maximize the benefit of LazyRS, a LazyRS-aware FTL adjusts the length of an idle interval dynamically over changing workload characteristics. The experimental results show that the LazyRS-aware FTL can efficiently improve the write throughput and reliability of flash-based storage systems by up to 2.6 times and 31.2%, respectively.

17 October 2025
Verified
Conference Paper
Open access
JLJaeyong Lee
Jaeyong Lee
BKBEOMJUN KIM
BEOMJUN KIM
MCMyoungjun Chun
Myoungjun Chun
MKMyungsuk Kim
Myungsuk Kim
JKJihong Kim
Jihong Kim

12 January 2022 in Electronics
Verified
Journal Article
Open access
PDF file
BKBEOMJUN KIM
BEOMJUN KIM
YKYongtae Kim
Yongtae Kim
PNPrashant Nair
Prashant Nair
SHSeokin Hong
Seokin Hong
STT-RAM (Spin-Transfer Torque Random Access Memory) appears to be a viable alternative to SRAM-based on-chip caches. Due to its high density and low leakage power, STT-RAM can be used to build massive capacity last-level caches (LLC). Unfortunately, STT-RAM has a much longer write latency and a much greater write energy than SRAM. Researchers developed hybrid caches made up of SRAM and STT-RAM regions to cope with these challenges. In order to store as many write-intensive blocks in the SRAM region as possible in hybrid caches, an intelligent block placement policy is essential. This paper proposes an adaptive block placement framework for hybrid caches that incorporates metadata embedding (ADAM). When a cache block is evicted from the LLC, ADAM embeds metadata (i.e., write intensity) into the block. Metadata embedded in the cache block are then extracted and used to determine the block’s write intensity when it is fetched from main memory. Our research demonstrates that ADAM can enhance performance by 26% (on average) when compared to a baseline block placement scheme.