In the present study, perlite was thermally activated and then modified desirably to generate super acidity by loading different weight percentages of sulfated zirconia (SZ) via the two-step sol-gel method. As-prepared sulfated zirconia perlite (SZP) catalysts showed suitable catalytic potential in the vapor phase alkylation of o, m, and p-cresols with tert-butyl alcohol. The presence of crystalline phases in SZP catalysts was confirmed by XRD and FT-IR studies. TEM images revealed the nano size of the catalysts in the range of 9–25 nm. The presence of SZ on the surface of perlite was further confirmed by N2 adsorption–desorption, SEM, SEM-EDX, TGA, and UV-Vis DRS techniques. The pyridine FT-IR results confirmed the existence of Brønsted, Lewis acidic sites and their combination as super acidic catalytic active centers on the surface of catalyst utilized in the vapor phase alkylation of o, m, and p-cresols with tert-butyl alcohol. The regeneration and reusability of the preferred catalyst until the 5th reaction cycle without any considerable loss in catalytic activity demonstrated the stability of the catalyst. Comparative studies show that SZP can be regenerated and is superior compared to other catalysts previously used for other alkylation reactions with the potential for use on a large scale.
Potentially active and eco-friendly solid acid catalysts have been synthesized by loading different weight percentages (10, 15, and 50) of nickel oxide on thermally activated Turkish perlite through the deposition-precipitation method. Structural features of prepared catalysts were analyzed using BET surface area analysis, X-ray diffraction, scanning electron microscope (SEM), SEM-EDX, transmission electron microscopy (TEM), Fourier-transform infrared (FT-IR), pyridine adsorbed FT-IR, UV-Vis diffuse reflectance spectroscopy (DRS), and thermogravimetric analysis (TGA) techniques. Pyridine adsorbed FT-IR analysis confirmed the presence of the optimum amount of Bronsted acidic sites in a catalyst having 15 wt. % loading of nickel oxide, which was tested for catalyzing a series of Claisen–Schmidt condensation of cyclohexanone and aromatic aldehydes to produce good isolated yield (90%–93%) of 2,6-bis(substituted benzylidene)cyclohexanones, significantly used in anti-tumor and cytotoxic activities. The high catalytic efficiency of the chosen catalyst remains almost intact up to six reaction cycles. On higher wt. % loading of nickel oxide, crystallite size increases along with agglomeration of larger nickel oxide particles on catalyst surface resulting in pore blockage and poor catalytic activity. Loading of NiO on the surface of thermally activated Turkish perlite was confirmed by SEM-EDX analysis, and TEM observations show that the particle size of the preferred catalyst was less than 50 nm. Based on results drawn from XRD, FT-IR, pyridine adsorbed FT-IR, UV-Vis DRS studies, model structures were proposed for Turkish perlite and all prepared catalysts. During this work, the catalytic potential of the preferred catalyst was compared with other previously reported catalysts, and it showed appreciable results. The formed products were further confirmed by their melting point and 1H-NMR analysis.
Silica nanoparticles have potential applications in diverse fields, such as construction, pharmaceuticals, batteries, and catalysis. Commercially, these are synthesized using some alkoxysilane precursors that are costly, toxic, and make the whole process expensive and polluting. Therefore, the development of some environmental-friendly approaches are encouraged for the safe synthesis of cost-efficient, green silica nanoparticles. Several silica-rich agricultural waste materials (corn cob, coffee husk, rice husk, sugarcane bagasse, wheat husk, etc.) have been recognized as invaluable, renewable resources to prepare silica nanoparticles. The objective of this chapter is to present an overview of the synthesis methods for green silica nanoparticles from different agricultural waste materials and their application as catalysts as well as catalyst support in various industrially important organic transformations occurred in the past decade. This chapter introduces to the various agricultural wastes, different methodologies (conventional as well as green) adopted for the synthesis of silica nanoparticles.
In present study, the research work has been divided into two sections viz. Firstly, amorphous silica was extracted from different silica rich agricultural and industrial waste materials (fly ash, perlite and rice husk ash) via sol-gel method. The extracted silica (RHA-Si, Perlite-Si, FA-Si) was characterized using BET surface area, FESEM, EDS, XRD, NMR and FTIR techniques. The surface area and particle size of extracted silica was found to be 23.06-255.5 m2/g and 61-267 nm. Secondly, fly ash silica was used as catalyst support and modified desirably by loading different molybdenum weight percentages via acid impregnation method. The presence of MoO3 on the surface of extracted silica were confirmed by different characterization techniques. The kinetic studies of the FASi/Mo-15 catalyst for the vapour phase oxidation of benzene was also investigated by employing the Mars Van Krevelen model to analyze the reaction mechanism and rate of the process. The vapour phase oxidation reaction follows zero order kinetics, with faster benzene conversion occurring at lower intake concentrations and higher reaction temperatures.