Red phosphor materials play a key role in improving the lighting and backlit display quality of phosphor-converted white light-emitting diodes (pc-WLEDs). However, the development of a red phosphor with simultaneous high efficiency, excellent thermal stability and high colour purity is still a challenge. In this work, unique non-concentration quenching in solid-solution Cs3Gd1 − xGe3O9:xEu3+ (CGGO:xEu3+) (x = 0.1–1.0) phosphors is successfully developed to achieve a highly efficient red-emitting Cs3EuGe3O9 (CEGO) phosphor. Under the optimal 464 nm blue light excitation, CEGO shows a strong red emission at 611 nm with a high colour purity of 95.07% and a high internal quantum efficiency of 94%. Impressively, this red-emitting CEGO phosphor exhibits a better thermal stability at higher temperatures (175–250 °C, >90%) than typical red K2SiF6:Mn4+ and Y2O3:Eu3+ phosphors, and has a remarkable volumetric negative thermal expansion (coefficient of thermal expansion, α = −5.06 × 10−5/°C, 25–250 °C). By employing this red CEGO phosphor, a fabricated pc-WLED emits warm white light with colour coordinates (0.364, 0.383), a high colour rendering index (CRI = 89.7), and a low colour coordinate temperature (CCT = 4508 K). These results indicate that this highly efficient red-emitting phosphor has great potential as a red component for pc-WLEDs, opening a new perspective for developing new phosphor materials.
Near-infrared (NIR)-emitting phosphor-converted light-emitting diodes have attracted widespread attention in various applications based on NIR spectroscopy. Except for typical Cr3+-activated NIR-emitting phosphors, next-generation Cr3+-free NIR-emitting phosphors with high efficiency and tunable optical properties are highly desired to enrich the types of NIR luminescent materials for different application fields. Here, we report the Fe3+-activated Sr2−yCay(InSb)1−zSn2zO6 phosphors that exhibit unprecedented long-wavelength NIR emission. The overall emission tuning from 885 to 1005 nm with broadened full-width at half maximum from 108 to 146 nm was realized through a crystallographic site engineering strategy. The NIR emission was significantly enhanced after complete Ca2+ incorporation owing to the substitution-induced lower symmetry of the Fe3+ sites. The Ca2InSbO6:Fe3+ phosphor peaking at 935 nm showed an ultra-high internal quantum efficiency of 87%. The as-synthesized emission-tunable phosphors demonstrated great potential for NIR spectroscopy detection. This work initiates the development of efficient Fe3+-activated broadband NIR-emitting phosphors and opens up a new avenue for designing NIR-emitting phosphor materials.
BaGdF5:Yb3+/Er3+ colloidal nanoparticles (NPs) with tunable average particle diameters from 3 to 10 nm in different solvents were first prepared by thermal decomposition method. X-Ray diffraction (XRD), transmission electron microscopy (TEM) and upconversion (UC) luminescence spectra were used to characterize the resulting samples. After coating the active shell (containing Yb3+) around the BaGdF5:Yb3+/Er3+ NPs, not only their morphology and monodisperse properties were well maintained but also the relative UC luminescence intensity was enhanced remarkably. In contrast to the pure BaGdF5:Yb3+/Er3+ core, the luminescence intensity of the active-shell coated NPs can be enhanced several hundred times. Unexpectedly, the luminescence intensity of the active-core/active-shell NPs was about four times as high as that of β-NaYF4:Yb3+/Er3+ NPs under the same doping concentration and measurement conditions. Moreover, the luminescence colors of the active-core/active-shell NPs can be tuned from green to yellow by multilayer active-shell coating under 980 nm laser excitation.