In this paper, hip implants made of Ti-6Al-4V titanium alloy are analyzed numerically using Extended Finite Element Method XFEM. The combined effect of corrosion and fatigue was considered here since this is a common cause of failure of hip implants. Experimental testing of Ti-6Al-4V alloy was performed to determine its mechanical properties under different working environments, including normal, salty, and humid conditions. The integrity and life of the hip implant were assessed using the Linear Elastic Fracture Mechanics (LEFM) approach. For this purpose, the conditional fracture toughness Kq using CT specimens from all three groups (normal, humid, salty conditions) were determined. This provided insight into how different aggressive environments affect the behavior of Ti-6Al-4V alloy; i.e., how much its resistance to crack growth would degrade depending on conditions corresponding to the real exploitation of hip implants. Next, analytical and XFEM analyses of fatigue behavior in terms of the number of cycles were performed for all three groups, and the obtained results showed good agreement, confirming the validity of the integrity assessment approach shown in this work, which also represented a novel approach since fatigue and corrosion effects were investigated simultaneously.
15 February 2023 in Tehnicki vjesnik - Technical Gazette
Fracture mechanics, as a scientific discipline dealing with the study of cracks in welded structures, has defined parameters and introduced new test methods in order to better determine the tendency to crack growth, critical conditions for rapid frac...
15 December 2021 in Advanced Technologies & Materials
In many production processes, as well as in the exploitation of machine components and structures, materials are exposed to impact loads. In structures made of welded joints of high strength low-alloy steels with their constituents (parent metal, weld metal and heat-affected-zone), the toughness test determines the tendency of steel to brittle fracture, respectively the tendency to increase brittleness during exploitation. The strain rate is high and the material manifests much more brittle behavior than is shown by tensile testing. Toughness as a mechanical property is an important factor that is defined as the energy that needs to be spent in order to achieve fracture. Parameters obtained by testing the properties of plasticity are the basis for the design of structures in order to achieve strengths under applied load. The test results of high strength low-alloy steel toughness assessment at different test temperatures show that temperature significantly affects the impact toughness of steels and their alloys. At higher temperatures the impact energy on fracture is high (the material shows the properties of plasticity) while at lower temperatures the impact energy is small (the material is brittle).
14 September 2016 in Lecture Notes in Mechanical Engineering