This review discusses recent achievements on grating fabrications in polymer optical fibers doped with photosensitive materials. First, different photosensitive dopants in polymer optical fibers (POFs) are summarized, and their refractive index change mechanisms are discussed. Then, several different doping methods to fabricate the photosensitive POFs are presented. Following that, the principles of gratings, including standard fiber Bragg gratings (FBGs), tilted fiber Bragg gratings (TFBGs), chirped fiber Bragg gratings (CFBGs), phase-shifted fiber Bragg gratings (PSFBGs), and long period fiber gratings (LPFGs), are reported. Finally, fabrications of different gratings based on photosensitive POFs in the last 20 years are reported. We present our article clearly and logically, so that it will be helpful for researchers to explore a broad perspective on this proposed topic. Overall, the content provides a comprehensive overview of photosensitive POF fabrications and grating inscriptions in photosensitive POFs, including previous breakthroughs and recent advancements.

Tilted fiber Bragg grating, which has the advantages of both fiber Bragg grating and long-period fiber grating, has been widely studied for sensing in many fields, especially in the field of biochemistry. Calmodulin, which has a wide distribution in eukaryotes, can regulate several enzymes such as adenylate cyclase and guanylate cyclase and mediates several cellular processes such as cell proliferation and cyclic nucleotide metabolism. The abnormal levels of calmodulin in the body will result in serious effects from metabolism to nerve growth and memory. Therefore, it is important to measure the calmodulin concentration in the body. In this work, we propose and experimentally demonstrate a plasmonic tilted fiber Bragg grating-based biosensor for calmodulin detection. The biosensor was made using an 18° tilted fiber Bragg grating with a 50 nm-thick gold nanofilm coating the surface of the fiber, and transient receptor potential channels were bonded onto the surface of the gold nanofilm to serve as bio-detectors for calmodulin detection. Experimental results showed that the limit of detection using our biosensor was 0.44 nM. Furthermore, we also demonstrated that the interaction between calmodulin and transient receptor potential channels was quite weak without calcium in the solution, which agrees with the biology. Our proposed biosensor has a simple structure, is easy to manufacture, and is of small size, making it a good choice for real-time, label-free, and microliter-volume biomolecule detection.

Twist sensors have emerged as crucial tools in the field of structural health monitoring, playing a significant role in monitoring and ensuring the integrity of critical infrastructure such as dams, tunnels, bridges, pipelines, and buildings. We proposed and demonstrated an all-fiber in-line twist sensor which was based on a capillary fiber spliced between two single-mode fibers with a transverse offset. Through a series of experiments, the sensor’s performance was evaluated and quantified. The results showcased remarkable twist sensitivities in both clockwise and anticlockwise directions. With a transverse offset of 8.0 µm, the sensor exhibited twist sensitivities of −0.077 dB/° and 0.043 dB/° in the clockwise and anticlockwise directions, respectively, in the measured twist range from 0 to 90°. Furthermore, it was also demonstrated that the sensor was temperature insensitive at the chosen wavelength of 1520 nm, which can assist in increasing measurement accuracy. Our sensor’s low cost, simplicity of manufacture, and improved performance will push forward its adoption in future engineering applications such as structural health monitoring in dams, tunnels, and buildings.