The crack and carbonation of concrete pose a great challenge to its durability. Therefore, this paper studies the effect of cracks on the carbonation depth of cement paste under different factors. The relationship between carbonation and cracks was determined, and the carbonation mechanism of cement paste with cracks was clarified. The results show that a small water–binder ratio can effectively inhibit the carbonation process. The bidirectional carbonation enlarged the carbonation area around the crack. Within 21 days of the carbonation, the carbonation depth increased with carbonation time, and the Ca(OH)₂ on the surface of the specimen was sufficient, allowing for a convenient chemical reaction with CO₂. The influence of crack width on the carbonation process at the crack was greater than the influence of the crack depth. Carbonation influenced the hydration of cement-based materials, altering the types and quantities of hydration products. In conclusion, accurately predicting the regularity of carbonation in cracked structures is critical for improving the durability of concrete.

To compare the corrosion inhibition behaviors of rust inhibitors with different mechanisms on steel bars, the rust resistance effect of sodium molybdate (Na₂MoO₄), sodium chromate (Na₂CrO₄), benzotriazole (BTA), N-N dimethyl ethanolamine, sodium molybdate (Na₂MoO₄) + benzotriazole (BTA), and sodium chromate (Na₂CrO₄) + benzotriazole (BTA) on steel bars in a simulated chloride concrete pore solution was studied. The rust resistance effects of different types of rust inhibitors were assessed by electrochemical impedance spectroscopy (EIS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The effects of different types of rust inhibitors on the film formation characteristics of a passive film on a steel bar surface were expounded. The results show that: When sodium molybdate (Na₂MoO₄) and benzotriazole (BTA) acted together, the impedance value and the capacitive reactance arc radius were the largest, and the density of the passive film and the inhibition efficiency were the highest. The composition of the passive film was primarily composed of iron compounds, and it also contained oxide and adsorption films that were formed on the steel bar surface by the rust inhibitors. The rust resistance effect was proportional to the compactness of the passive film.