Elena Pupysheva

Ms. Elena Pupysheva


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 November 2022 in Symmetry
Verified
Journal Article
Open access
PDF file
EFElmira Fedorova
Elmira Fedorova
EPElena Pupysheva
Elena Pupysheva
VMVladimir Morgunov
Vladimir Morgunov
The paper evaluates the behavior of a red-mud solid fraction in a thickener feeder cup, aiming to identify the main characteristics of particle distribution in the flocculation zone and to determine the dependencies affecting the further process taking place in the particle-free sedimentation zone in the thickener-thickening unit. This work used mathematical and numerical modeling to study the influence of such parameters as the flow rate of the feed pulp in the thickener, the flow rate of the flocculant, the density of pulp at the inlet to the unit, and the viscosity and temperature of the pulp on the particle-size distribution from under the feeder cup. The results and dependencies obtained are intended to be used as nominal values in the red-mud thickening process performed on a lab-scale unit.

22 May 2025 in Eng
Verified
Journal Article
Open access
PDF file
EFElmira Fedorova
Elmira Fedorova
VMVladimir Morgunov
Vladimir Morgunov
KLKirill Lobko
Kirill Lobko
EPElena Pupysheva
Elena Pupysheva
The article examines the parameters of axial motion of bulk material in rotary kilns, including bed height, axial velocity, and mean residence time. The review includes summary tables of experiments from the scientific literature, detailing the conditions and ranges of operating parameter variations. Mathematical models from the literature are presented for each of the parameters discussed. The materials of the article cover studies from 1927 to 2025, including analysis of numerous works that were not published in international sources. Based on the review, the necessity of studying the impact of coating formation on the axial motion parameters is highlighted, along with the need for experiments on real facilities and pilot plants.

18 January 2024 in Symmetry
Verified
Journal Article
Open access
PDF file
EFElmira Fedorova
Elmira Fedorova
EPElena Pupysheva
Elena Pupysheva
VMVladimir Morgunov
Vladimir Morgunov
This study presents a mathematical description of the solid fraction aggregation process in the presence of a flocculant and its result. The basis is a population balance equation. The model is realized in Python language. Verification was carried out using red mud from the investigated enterprise; Flomin AL P 99 VHM was used as a flocculant. The mean square deviation for the parameter “mean aggregate diameter” is equal to 19.88 μm. The time required for the model calculation is about 3 min. The time spent on modeling depends on the number of calculation channels. In this study, 40 channels (20 with PSD source data, and 20 with empty values required for the calculation) were used for the calculation. The time spent on the model calculation is much shorter than the inertia via each of the communication channels for the studied symmetric radial type thickener. A user interface is developed, where the input parameters are the initial pulp particle size distribution, viscosity and density of pulp in the thickener, particle surface area, concentration and flow rate of flocculant, concentration of solid particles, inner diameter and height of the feed well, and simulation time. The result of the simulation is particle size distribution in the feed well of the washer and the mean flocculus diameter.