A compact and modular pulse forming network (PFN)-Marx generator with output parameters of 5 GW, 500 kV, and 30 Hz repetition is designed and constructed to produce intense electron beams for the purpose of high-power microwave (HPM) generation in the paper. The PFN-Marx is composed by 22 stages of PFN modules, and each module is formed by three mica capacitors (6 nF/50 kV) connected in parallel. Benefiting from the utilization of mica capacitors with high energy density and a mini-trigger source integrated into the magnetic transformer and the magnetic switch, the compactness of the PFN-Marx system is improved significantly. The structure of the PFN module, the gas switch unit, and the connection between PFN modules and switches are well designed for modular realization. Experimental results show that this generator can deliver electrical pulses with the pulse width of 100 ns and amplitude of 500 kV on a 59-ohm water load at a repetition rate of 30 Hz in burst mode. The PFN-Marx generator is fitted into a cuboid stainless steel case with the length of 80 cm. The ratio of storage energy to volume and the ratio of power to weight of the PFN-Marx generator are calculated to be 6.5 J/L and 90 MW/kg, respectively. Furthermore, utilizing the generator to drive the transit time oscillator (TTO) at a voltage level of 450 kV, a 100 MW microwave pulse with the pulse width of 20 ns is generated.

In liquid mediums, whether the breakdown strength can be greatly improved after introducing the nano-particles has been widely investigated, however, there has been no scientific consensus on the modification mechanism of this anomalous phenomenon. In this paper, we first experimentally measured the streamer morphology and breakdown strength in pure transformer oil, TiO${}_2$ nano-liquids and Al${}_2$O${}_3$ nano-liquids under microsecond pulse. The results demonstrated that there are significant differences in streamer morphology between pure transformer oil and nano-liquids, as the streamers in pure transformer oil exhibit thick bush-like qualities, while in nano-liquids they exhibit tree-like qualities. Moreover, the breakdown voltage results show that the breakdown strength of transformer oil is improved after nano-modification, and the TiO${}_2$ nano-liquids and Al${}_2$O${}_3$ nano-liquids have nearly the same optimal volume fraction. The results of the analysis indicate that the modification mechanism of nano-particles is significantly linked to the trapped electrons process. Specifically, the addition of nano-particles can affect the electrons’ density and thus affect the breakdown process and streamer morphology.