Driven by recent improvements in efficiency and stability of perovskite solar cells (PSCs), upscaling of PSCs has come to be regarded as the next step. Specifically, a high-throughput, low-cost roll-to-roll (R2R) processes would be a breakthrough to realize the commercialization of PSCs, with uniform formation of precursor wet film and complete conversion to perovskite phase via R2R-compatible processes necessary to accomplish this goal. Herein, we demonstrate the pilot-scale, fully R2R manufacturing of all the layers except for electrodes in PSCs. Tert-butyl alcohol (tBuOH) is introduced as an eco-friendly antisolvent with a wide processing window. Highly crystalline, uniform formamidinium (FA)-based perovskite formation via tBuOH:EA bathing was confirmed by achieving high power conversion efficiencies (PCEs) of 23.5% for glass-based spin-coated PSCs, and 19.1% for gravure-printed flexible PSCs. As an extended work, R2R gravure-printing and tBuOH:EA bathing resulted in the highest PCE reported for R2R-processed PSCs, 16.7% for PSCs with R2R-processed SnO2/FA-perovskite, and 13.8% for fully R2R-produced PSCs.
In state-of-the-art n–i–p structured perovskite solar cells (PSCs), a dopant for doping hole transporting materials (HTMs) is a crucial component, which affects not only the electrical properties of HTMs, but also the performances and stabilities of PSCs. In this paper, we report new dual functional ionic liquids (ILs) consisting of various alkylammoniums (from butyl to decyl) and bis(trifluoromethylsulfonyl)imide (denoted as BATFSI, HATFSI, OATFSI, and DATFSI) as a dopant and surface passivator for highly efficient and stable PSCs and modules. Among these ILs, OATFSI provides enough miscibility with a poly(triarylamine) solution, which results in a smoother morphology of the hole transporting layer (HTL) with an enhanced electrical property via efficient doping. Simultaneously, OATFSI passivates the perovskite surface in situ, during spin-coating deposition of the HTL. Highly efficient and stable OATFSI-based PSCs are fabricated with a mesoporous n–i–p structure and a maximum power conversion efficiency (PCE) of 23.34%, due to reduced non-radiative recombination and better charge extraction. To verify the scalability of our new IL dopants, perovskite modules with a high PCE of 18.54% (on the aperture area of 224.89 cm2) and 19.91% (on the active area of 209.39 cm2) are demonstrated. We believe our work provides useful guidelines to achieve efficient and stable PSCs and modules for commercialization.
To obtain highly efficient and stable perovskite solar cells (PSCs), defects must be removed at the grain boundaries of the perovskite films. Most surface-treatment methods involve dissolving the passivating material in a solvent and applying it to the surface. However, as the surface-treatment temperature increases, the solvent evaporates, resulting in the reaction occurring in the solid state. In this work, we report an effective interfacial-engineering method for PSCs involving the in situ thermal phase transition of alkylammonium formates (AAFos). AAFos, which consist of a large organic cation with a pseudo-halide anion, can participate in the passivation as the liquid phase at relatively low temperatures because of the weak coordination between the cations and anions. This property accounts for their several benefits in interfacial engineering: (1) by enhancing the liquid-like behavior of AAFo, it can effectively passivate into the grain boundaries of perovskites to reduce the trap densities. (2) The formate anion has a relatively higher affinity with iodide vacancies than other halides, resulting in effective passivation at iodide vacancies for improved thermal stability. (3) The long alkyl chain of decylammonium cations improves moisture stability by preventing moisture permeation into the perovskite layer. Thanks to these advantages, we achieved a power-conversion efficiency (PCE) of 25.0% with superior thermal stability (under N2 at 85 °C) and moisture stability (60 ± 10% of relative humidity), which retained over 92% and 81% of their initial efficiency for 1000 hours using dodecylammonium formate. Finally, we achieved a high efficiency of 20.82% and a remarkable fill factor (80.77%) in PSC modules with an active area of 23.75 cm2, proving the suitability of the strategy for manufacturing large-area devices. This work demonstrates that defect passivation via thermal-phase transition is an efficient strategy for improving the PCE and stability of PSCs.
Spiro‐OMeTAD has remained the benchmark hole‐transporting material (HTM) in state‐of‐the‐art perovskite solar cells, owing to its favorable energy level alignment and excellent interfacial compatibility. However, its practical implementation is critically hindered by the intrinsic instabilities introduced by conventional dopants such as lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and 4‐ tert ‐butylpyridine ( t BP). While these dopants enhance electrical conductivity, they concurrently initiate multiple degradation pathways—including ionic migration, radical deactivation, and moisture/thermal‐induced morphological failure—thereby compromising device longevity and reproducibility. This review presents a comprehensive and mechanistic perspective on dopant‐induced instabilities in spiro‐OMeTAD‐based hole‐transporting layers, systematically unraveling the physicochemical origins of performance loss under operational stress. Recent advances in dopant design, additive engineering, and post‐oxidation‐independence doping strategies that aim to circumvent the trade‐offs inherent to traditional systems are further highlighted. Emphasis is placed on the interdependence among dopant formulation, charge transport kinetics, and environmental resilience. By integrating insights from advanced characterization and molecular‐level design, rational guidelines toward the development of next‐generation dopant systems and HTM architectures that reconcile high efficiency with long‐term operational stability are proposed. This review offers a forward‐looking framework to steer the evolution of robust and commercially viable perovskite photovoltaics.
The power conversion efficiency of perovskite solar cells continues to increase. However, defects in perovskite materials are detrimental to their carrier dynamics and structural stability, ultimately limiting the photovoltaic characteristics and stability of perovskite solar cells. Herein, we report that 6H polytype perovskite effectively engineers defects at the interface with cubic polytype FAPbI3, which facilitates radiative recombination and improves the stability of the polycrystalline film. We particularly show the detrimental effects of shallow-level defect that originates from the formation of the most dominant iodide vacancy (VI+) in FAPbI3. Furthermore, additional surface passivation on top of the hetero-polytypic perovskite film results in an ultra-long carrier lifetime exceeding 18 μs, affords power conversion efficiencies of 24.13% for perovskite solar cells, 21.92% (certified power conversion efficiency: 21.44%) for a module, and long-term stability. The hetero-polytypic perovskite configuration may be considered as close to the ideal polycrystalline structure in terms of charge carrier dynamics and stability.