Materials whose dimensions are less than 100 nm of diverse sizes and different shapes of the metal/semiconductor/insulator particles are known as nanomaterials. Nanomaterials exhibit very peculiar thermal, mechanical, electrical, optical, and chemical properties compared to their bulk counterparts. When a bulk material is chopped to a nano-dimension, electrons are subjected to peculiar boundary conditions, eventually leading to the nanomaterials' special properties. Due to their exceptional properties, nanomaterials have unique applications in all branches of science. Consequently, the researchers explored many methods of synthesis of the nanomaterials. However, each method has its advantages and disadvantages, some methods are flexible in synthesizing nanoparticles with uniform size distribution and some are feasible to produce nanomaterials at higher yields. Different methods follow their own synthesis protocols, time durations, economical feasibility, and reproducibility. Most methods complement one another by producing nanomaterials of evenly distributed sizes, shapes, properties, etc. Amongst, the, laser ablation of metals/semiconductors/insulators immersed in a liquid medium is a well-known method of green synthesis of nanomaterials that utilizes no hazardous chemical precursors. Laser ablation in liquids (LAL) combines top-down and bottom-up approaches that do not require lengthy sample preparations, chemical surfactants, and sophisticated experimental methodologies. The physical processes involved in the LAL of different metals/semiconductors are discussed briefly. Additionally, the applications of nanomaterials in various fields of science are included and the review is concluded with the challenges and the future scope of LAL.
We report the fabrication of silver nanoribbons by picosecond laser ablation of bulk silver (Ag) targets submerged in double distilled water (DDW) using a cylindrical focusing geometry. The laser ablation was performed by ∼2 picosecond laser pulses and the corresponding light sheet engendered by a cylindrical lens of focal length ∼4.5 cm. The input pulse energies employed at a wavelength ∼800 nm in the experiments were ∼1000 μJ, ∼1200 μJ, and ∼1400 μJ. In contrast to the case of ablation with spherical lenses, cylindrical lens ablation produced nanoparticles (NPs) and nanostructures (NSs) in 20% less time. The data obtained from the optical characterizations exemplify that localized surface plasmon resonance (LSPR) was observed at 406 nm, 408 nm, and 410 nm for the input energies of ∼1000 μJ, ∼1200 μJ, and ∼1400 μJ, respectively. Interestingly, it was observed that the ablation performed at an input energy of ∼1200 μJ demonstrated the fabrication of Ag nanoribbons rather than the formation of Ag NPs. Selected area electron diffraction (SAED) data of the nanoribbons recorded revealed their crystalline phase and linear morphology. Ag nanomaterials (NPs and ribbons) synthesized in these experiments were employed to detect the explosive molecules of 2,4,6-trinitrotoluene (TNT) at a concentration 25 nM using the technique of surface enhanced Raman scattering. The enhancement factor in the case of Ag nanoribbons (width of ∼20–30 nm, length of ∼0.6–2 μm), obtained using the cylindrical focussing geometry at input pulse energies of ∼1200 μJ, was estimated to be ∼107 for the 1362 cm−1 mode, corresponding to the symmetric NO2 stretch of TNT.
This study reports the synthesis of SnO 2 nanoparticles using a sol–gel method and thermal annealing at 800 and 900 °C to optimise their structural and surface properties for non-plasmonic semiconductor-based SERS applications.