Satellites have been developed and operated for various purposes. The global satellite market is growing rapidly as the number of satellites and their mission diversity increase. Satellites revolve around the Earth to perform missions and communicate with ground stations repeatedly and sequentially. However, because satellites are orbiting the Earth, there is a limited time window for missions to a specific area and communication with ground stations. Thus, in an environment where multiple satellites and multiple ground stations (MS-MGs) are operated, scheduling missions and communications to maximize the utilization of satellites is a complex problem. For the MS-MG scheduling problem, this study proposes a mixed-integer linear programming (MILP) model to assign time windows for missions and communications with ground stations to individual satellites. The MILP model is based on the concept of a time-space network and includes constraints reflecting on the space mission environment of satellites. The objective function and constraints of the MILP model were validated through numerical experiments based on actual data from Korean satellites.
Electrospray thrusters employ ionization in the liquid phase to produce and propel streams of molecular ions or highly charged droplets at significant velocities. In this study, we developed a novel annular slit-type emitter for electrospray and investigated its operational modes under varying applied potentials in both open atmosphere and vacuum conditions. To assess the performance of the annular slit-type emitter in comparison to the conventional capillary-type emitter, benchtop electrospray experiments were conducted using water and glycerin as working fluids for both emitter types. The study examined the formation of the Taylor cone, cone-to-jet transition, stable jet, whipping jet, and multi-jet, along with their dependence on fluid viscosity and electric potential for both emitter designs. Clear distinctions in hydrodynamic mode, drop-to-cone mode, and cone-to-jet transition mode were observed between the two emitters. As the electric potential increased, the capillary-type emitter exhibited a whipping and pulsating water jet, while glycerin displayed a steady tilted jet. In contrast, the annular slit-type emitter demonstrated a pulsating water jet followed by a distinctive dripping mode at higher electric potentials, while glycerin formed multiple steady jets around the annular slit. Notably, the annular slit-type emitter, when subjected to an 18.5 kV potential, produced seven electrospray jets for glycerin, a phenomenon attributed to the novel design of the emitter and the viscosity of glycerin enabling the generation of multiple cone-jets at a specific electrostatic potential around the slit peripheral meniscus. Vacuum chamber tests of the annular-type emitter using liquid indium as an ion source at 1 × 10−5 Torr revealed an ion-current density of 0.3 mA/mm, resulting in a thrust of 290 μN.