Recent metrological activities with programmable Josephson voltage standards (PJVS) are focused on extending the quantum accuracy to AC voltages, e.g. for the step-wise approximation of sine waves. Stimulated by the progress in this field, new requirements for the quality and availability of 1 V and 10 V circuits have been established. Based on the experience with programmable 1 V SINIS circuits fabricated at PTB and used at present by 13 National Metrological Institutes worldwide, the fabrication process and the microwave design were improved. The experience gained hereby enabled us to improve the properties of programmable 10 V SINIS arrays which were realized by us for the first time in 2000. The new 10 V circuits have 17 bit resolution and develop under 70 GHz microwave irradiation flat Shapiro steps at the 10 V level which are more than 600 muA wide. A direct comparison of the output voltage with a conventional 10 V SIS Josephson voltage standard confirmed the suitability for metrological applications. Incorporating 10 V-PJVS into existing AC metrology setups is expected to reduce their uncertainty budgets by about one order of magnitude.
27 January 2011 in Superconductor Science and Technology
We developed a fabrication process to establish large arrays of up to 5-stacked Josephson junctions for the Josephson Arbitrary Waveform Synthesizer (JAWS). SNS-type Josephson junctions with Nb x Si 1-x barriers are used for this application. By modifying our standard window process, e.g. to add a CMP (chemical mechanical polishing) and an ALD (atomic layer deposition) step, the yield of this process was increased. An output voltage of 1 V RMS could be achieved by using 4 JAWS arrays in series with a total number of 60,000 5-stacked junctions. The investigation of the current-voltage characteristics (IVC) showed an interesting and potentially useful feature. The required pulse amplitude per junction for getting the maximum Shapiro step width reduces for higher junction stacks. We found that the pulse power linearly reduces with the square of the junction number in the array. The origin of this effect might be a strong neighbour-neighbour interaction of the junctions, which are closely arranged within the stacked configuration. This might generate a strong self-synchronization of the junctions.
23 July 2007 in IEEE Transactions on Applied Superconductivity
The Josephson arbitrary waveform synthesizer (JAWS) allows AC voltages to be generated with fundamental accuracy. Lumped arrays of superconductor/normal conductor/superconductor (SNS) Josephson junctions were developed and investigated for this application. Combining electron-beam lithography and chemical-mechanical polishing, series arrays of sub-micrometer SNS junctions consisting of Nb/HfTi/Nb were fabricated. The junction size varied from 0.04 mum2 to 4 mum2 in series arrays up to 2560 junctions in different microwave designs. Stable Shapiro steps are generated in a frequency range from 5 GHz to 20 GHz using continuous microwave irradiation. Using a simple pulse pattern at different pulse repetition frequencies, the arrays show current-voltage characteristics with flat Shapiro steps. Sinusoidal AC voltages were synthesized using a commercial pulse pattern generator. Peak-to-zero voltages of some mV for frequencies below 1 kHz were achieved. Higher harmonics were measured to be more than 80 dB below the fundamental tone. The behavior of the arrays was investigated in more detail by measuring the amplitude-frequency spectra.
Josephson junctions operated by short pulses make the synthesis of AC and arbitrary waveforms possible. Series arrays of intrinsically shunted SINIS and SNS Josephson junctions were developed and characterized for applications in this Josephson arbitrary waveform synthesizer (S: Superconductor, I: Insulator, N: Normal conductor). First measurements under pulse irradiation are presented.