Carbon-based electrodes play important roles in constructing efficient capacitive deionization (CDI) devices. Therefore, the rational design of carbon materials with optimized structure, composition, and morphology is crucial for further improving the CDI performance. Herein, a novel N, P co-doped eave-like hierarchical porous carbon (NP-EHPC) for CDI is reported. To prepare the NP-EHPC, the core–shell ZIF-8@AF particles are first prepared through the kinetically-controlled growth of zeolitic imidazolate framework-8 (ZIF-8) and polymerization of p-aminophenol and formaldehyde (AF), followed by subsequent pyrolysis and post-doping with phosphorus. Owing to the unique eave-like morphology, presence of abundant mesopores, and co-doping of P and N, the NP-EHPC exhibits a high desalination capacity of 24.14 mg g⁻¹ in 500 mg L⁻¹ NaCl solution at 1.2 V and long cycling stability of over 150 cycles. Moreover, the density functional theory (DFT) calculation results reveal that the co-doping of N and P atoms can greatly enhance the binding energies for Na and Cl atoms and lead to superior electrosorption capacity. This work provides a new insight into the design of high-performance carbon materials for the desalination of brackish water.

Visual detection/adsorption/extraction of Co²⁺ions from SLIBs through a simple, low-cost mesospongy ion-extractor/sensor/captor as a new effective route for e-waste management, is presented.

The jeopardy of the synthetic dyes effluents on human health and the environment has swiftly aggravated, threatening human survival. Hence, sustained studies have figured out the most acceptable way to eliminate this poisonous contaminant. Thereby, our investigation aimed to fabricate montmorillonite/magnetic NiFe₂O₄@amine-functionalized chitosan (MMT-mAmCs) composite as a promising green adsorbent to remove the cationic methylene blue (MB) and crystal violet (CV) dyes from the wastewater in neutral conditions. Interestingly, MMT-mAmCs composite carries high negative charges at a wide pH range from 4 to 11 as clarified from zeta potential measurements, asserting its suitability to adsorb the cationic contaminants. In addition, the experimental study confirmed that the optimum pH to adsorb both MB and CV was pH 7, inferring the ability of MMT-mAmCs to adsorb both cationic dyes in simple process conditions. Furthermore, the ferromagnetic behavior of the MMT-mAmCs composite is additional merit to our adsorbent that provides facile, fast, and flawless separation. Notably, the as-fabricated composite revealed an auspicious adsorbability towards the adsorptive removal of MB and CV, since the maximum adsorption capacity of MB and CV were 137 and 118 mg/g, respectively. Moreover, the isotherm and kinetic investigatins depicted that the adsorption of both cationic dyes fitted Langmuir and Pseudo 2nd order models, respectively. Besides, the advanced adsorbent preserved satisfactory adsorption characteristics with maximal removal efficacy exceeding 87% after reuse for ten consecutive cycles. More importantly, MMT-mAmCs efficiently adsorbed MB and CV from real agricultural water, Nile river water and wastewater samples at the neutral pH medium, reflecting its potentiality to be a superb reusable candidate for adsorptive removal cationic pollutants from their aquatic media.