The current study investigated the fabrication of multi-walled carbon nanotubes (MWCNTs) adhering to Barium titanate (BaTiO₃) nanoparticles and poly(vinylidene fluoride) (PVDF) nanocomposites, as well as the impact of MWCNT on the PVDF-BaTiO₃ matrix in terms of dielectric constant and dielectric loss with a view to develop a high performance piezoelectric energy harvester in future. The capacity and potential of as-prepared nanocomposite films for the fabrication of high-performance flexible piezoelectric nanogenerator (PNG) were also investigated in this work. In particular, five distinct types of nanocomposites and films were synthesized: PB (bare PVDF–BaTiO₃), PBC-1 (PVDF–BaTiO₃-0.1 wt% CNT), PBC-2 (PVDF–BaTiO₃-0.3 wt% CNT), PBC-3 (PVDF–BaTiO₃-0.5 wt% CNT), and PBC-4 (PVDF–BaTiO₃-1 wt% CNT). The dielectric constant and dielectric loss increased as MWCNT concentration increased. Sample PBC-3 had the optimum dielectric characteristics of all the as-prepared samples, with the maximum output voltage and current of 4.4 V and 0.66 μA, respectively, with an applied force of ~2N. Fine-tuning the BaTiO₃ content and thickness of the PNGs is likely to increase the harvester’s performance even more. It is anticipated that the work would make it easier to fabricate high-performance piezoelectric films and would be a suitable choice for creating high-performance PNG.

In this context, the open-circuit voltage generated by either poly (vinylidene fluoride) or PVDF and ZnO composite sample before being enhanced to 4.2 V compared to 1.2 V for the samples of pure PVDF. The spin coating method was used to create a composite film, which served as a piezoelectric nanogenerator (PNG). Zinc oxide (ZnO) nanoparticles and PVDF serve as the matrix for the coating structure. Thin films were created that employed the spin coating method to achieve the desired results of ZnO’s non-brittle outcome and piezoelectric characteristics, as well as PVDF for use in self-powered devices. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and fourier transform infrared (FT-IR) were used to evaluate the properties of these formations. The electrical properties of the film were measured using an oscilloscope. Results indicated that by adding ZnO nanoparticles to the PVDF samples, piezoelectric capabilities were enhanced compared to samples containing PVDF only. These results point to promising uses for various wearable devices, such as water strider robot systems and self-operating equipment.