In order to estimate mean tree height using small-footprint airborne light detection and ranging (LiDAR) data, a digital terrain model (DTM), which is a continuous elevation model of the ground surface, is usually required. However, generating accurate DTMs in mountainous forests using only the LiDAR data is laborious and time consuming, because it requires human-assisted methods, especially in the forests with poor laser penetration rates. Based on our previous finding that a hypothetical continuous surface model passing through the predominant tree tops (hereafter, called the “top surface model” or TSM) might be nearly parallel to a DTM, we assumed that the vertical difference between the TSM and the ground return was the mean tree height. According to this assumption, we propose a new methodology that does not require a DTM to estimate mean tree height. This method completely, automatically, and directly estimates mean tree height (MTHE) from the LiDAR data without requiring a regression analysis using reference data. From the relationships between the MTHE and the observed mean tree height (MTHO) in different hinoki cypress forests, we demonstrate that this method effectively estimates the mean tree height with nearly 1-m accuracy.
Teak is a globally valuable hardwood tree species, as its growth performance is important for timber productivity. The purpose of this study was to establish an effective management system for teak plantations in the Lao PDR. Using diameter at breast height (DBH) and height growth as significant indicators of growth performance, we investigated the relationship between tree growth curve parameters of teak and topographic conditions. Stem analysis data for 81 sample trees (three trees selected in canopy trees with predominant height in each plot) were examined for growth performance using the Mitscherlich growth function. The results of Spearman’s partial rank correlation indicated that the upper limits of DBH and tree height growth had significant negative correlations with the slope gradient and stand density. The curvature of DBH and tree height growth curves showed significant positive correlations with the slope form. Moreover, the elevation and slope gradient showed significant negative correlations with the curvature of tree height growth curve. However, the time lag of DBH growth showed a significant negative correlation with the slope position, while the slope gradient was positively correlated with the time lag of tree height growth. These results suggest that teak planted at lower slopes has faster growth rates and that there is an interaction with the gentle concave slope of this area.
In order to evaluate the effects of settings of digital fisheye photography on estimates of relative illuminance (RI) within a forest under low light conditions, we assessed the effectiveness of some estimators, i.e., canopy openness (CO), sky factor (SF), and diffuse transmittance (DIF). The estimates were calculated from digital hemispherical photographs taken with two different exposure settings, i.e., the reference exposure setting and the auto-exposure setting. We also presented a new estimator (%Exposure), which does not require image analysis, and compared it with other estimators calculated from a digital hemispherical photograph using image analysis. The CO, SF, and DIF calculated from digital hemispherical photographs taken with auto-exposure setting were not significantly correlated with RI. However, those calculated from digital hemispherical photographs taken with reference exposure settings were significantly correlated with RI. On the other hand, %Exposure showed a slightly higher correlation with RI compared with the other estimators.
Teak (Tectona grandis Linn. f) is a globally valuable hardwood tree species whose growth performance and tree quality characteristics are controlled by various factors. Teak tree quality characteristics such as stem straightness, buttressing, and protuberant buds/knots are important in the sawing process, and directly affect timber yield, timber grade, recovery, and cost. In this study, we assessed the relationships among tree quality characteristics, stand characteristics, and site characteristics in plantation teak in the Luang Prabang province of the Lao PDR. We established 53 sample plots (20 × 20 m) and measured a total of 2149 sample trees. The stand-level tree age ranged from 10 to 31 years, and the trees were distributed in various modes of topography. The altitude ranged from 287 to 867 masl. The results of Spearman’s partial rank correlation analysis among the parameters revealed the present condition of the teak plantation forest in the region. The altitude was related to stand age and was correlated with tree quality characteristics such as epicormic shoots, mode of branching, and branch size. The correlation results suggest that higher-density plantation at the higher altitude sites might be suitable for teak plantations in this area. In addition, we found that a longer rotation in forest management might degrade tree quality.
To evaluate canopy metrics at landscape or regional levels, remote sensing techniques have usually been employed. In particular, ratio metrics such as laser penetration index (LPI: %) calculated as the percentage of ground returns of laser pulses within the forest from light detection and ranging (LiDAR) data have proved to be closely related to canopy metrics obtained in the field. In our previous study, we successfully proposed a new methodology that automatically and easily separated the laser pulses into those of canopy and below-canopy returns. In this study, we assessed the effectiveness of LPI that was calculated using our methodology to estimate relative illuminance (RI: %) and also evaluated the optimal scale to calculate LPI for estimating RI. We found that LPI was closely related to RI (P < 0.01), and might not be affected by the increase of pulse density by overlapping surveys. We further found that a radius of less than 5.0 m in the cylindrical plot to calculate LPI might not be suitable for estimating canopy metrics, especially for LiDAR data with relatively low pulse density.