Novel glass samples with the composition 75TeO₂–5Ta₂O₅–15Nb₂O₅–5x (where x = ZnO, MgO, TiO₂, or Na₂O) in mole percent were prepared. The physical, optical, and gamma radiation shielding properties of the glass samples were studied over a wide energy spectrum ranging between 0.015 and 20 MeV. The glasses’ UV–vis spectra were utilized to evaluate the optical energy gap and refractive index. Glass samples had a refractive index ranging from 2.2005 to 2.0967. The results showed that the sample doped with zinc oxide (ZnO) recorded the highest density (ρ_glass), molar polarizability (α_m), molar refraction (Rm), refractive index (n), and third-order nonlinear optical susceptibility (χ³) and the lowest optical energy gap (E_opt) among the samples under investigation. When comparing the current glass system with various standard glass shielding materials, the prepared glass system showed superior shielding performance at energies ranging between 40 and 85 keV. These findings indicate that the prepared glass systems can be used in diagnostic X-rays, especially in dental applications.

A novel series of glass, consisting of B₂O₃, Bi₂O₃, TeO₂, and TiO₂ (BBTT) containing rare earth oxide RE₂O₃, where RE is La, Ce, Sm, Er, and Yb, was prepared. We investigated the structural, optical, and gamma attenuation properties of the resultant glass. The optical energy bands, the linear refractive indices, the molar refractions, the metallization criteria, and the optical basicity were all determined for the prepared glass. Furthermore, physical parameters such as the density, the molar volume, the oxygen molar volume, and the oxygen packing density of the prepared glass, were computed. Both the values of density and optical energy of the prepared glass increased in the order of La₂O₃, Ce₂O₃, Sm₂O₃, Er₂O₃, and then Yb₂O₃. In addition, the glass doped with Yb₂O₃ had the lowest refractive index, electronic polarizability, and optical basicity values compared with the other prepared glass. The structures of the prepared glass were investigated by the deconvolution of infrared spectroscopy, which determined that TeO₄, TeO₃, BO₄, BO₃, BiO₆, and TiO₄ units had formed. Furthermore, the structural changes in glass are related to the ratio of the intensity of TeO₄/TeO₃, depending on the type of rare earth. It is also clarified that the resultant glass samples are good attenuators against low-energy radiation, especially those that modified by Yb₂O₃, which exhibited superior shielding efficiency at energies of 622, 1170, and 1330 keV. The optical and gamma ray spectroscopy results of the prepared glass show that it is a good candidate for nonlinear optical fibers, laser solid material, and optical shielding protection.

The synthesized glass system with a composition of (80-x) TeO₂-10P₂O₅-10Nb₂O₅-xKCl mol% (where x = 5, 10, 15, 20, and 25) was successfully fabricated. The density (ρ) and molar volume (V_m) have been calculated. The investigated glasses were characterized using different analysis methods (differential thermal analysis (DTA) and UV-VIS-NIR spectroscopy). The radiation shielding effectiveness of the synthesized glass system was evaluated using different shielding parameters, such as mass and linear attenuation coefficients (MAC, LAC), half-value layer (HVL), mean free path (MFP), effective atomic number (Z_eff), and effective electron number (N_eff). The results showed that with the increasing potassium chloride (KCl) concentration and decreasing tellurium oxide (TeO₂) concentration, the density, refractive index, Urbach energy (E_u), and glass transition temperature (T_g) decreased, while the optical energy gap (E_opt) and thermal stability increased. As the KCl concentration increases, the values of MAC, LAC, and Z_eff increase in the following order: TPNK5 % > TPNK10 % > TPNK15 % > TPNK20 % > TPNK25 %. Additionally, the shielding effectiveness of TPNK glass system showed good performance compared with some standard materials. The synthesized glass with a minimum KCl content has both good shielding effectiveness and good optical properties, in addition to reasonable thermal stability, which makes it suitable for shielding and optical applications.

In this study, the X-ray and gamma attenuation characteristics and optical properties of a synthesized tellurite–phosphate–sodium oxide glass system with a composition of (85 − x)TeO₂–10P₂O₅–xNa₂O mol% (where x = 15, 20, and 25) were evaluated. The glass systems we re fabricated by our research group using quenching melt fabrication. The shielding parameters of as-synthesized systems, such as the mass attenuation coefficient (MAC), linear attenuation coefficient (LAC), effective atomic number (Z_eff), half-value layer (HVL), tenth value layer (TVL), mean free path (MFP), and effective electron density (N_eff) in a wide energy range between 15 keV and 15 MeV, were estimated using well-known PHY-X/PSD software and recently developed MIKE software. Herein, the optical parameters of prepared glasses, such as molar volume (V_M), oxygen molar volume (V_O), oxygen packing density (OPD), molar polarizability (${\mathsf{\alpha }}_{\mathrm{m}}$), molar refractivity (R_m), reflection loss (R_L), and metallization (M), were estimated using MIKE software. Furthermore, the shielding performance of the prepared glasses was compared with that of commonly used standard glass shielding materials. The results show that the incorporation of sodium oxide into the matrix TeO₂/P₂O₅ with an optimum concentration can yield a glass system with good shielding performance as well as good optical and physical properties, especially at low photon energy.