Eramet uses a combination of physical and hydrometallurgical treatment to recycle lithium-ion batteries. Before hydrometallurgical processing, mechanical treatment is applied to recover the Black Mass which contains nickel, cobalt, manganese and lithium as valuable elements as well as graphite, solvent, plastics, aluminium and copper. To evaluate the suitability for hydrometallurgical recycling, it is essential to analyse the Black Mass chemically but also with respect to size, shape and composition of particles in the Black Mass. The Black Mass of various battery recyclers was investigated by using a combination of SEM/QEMSCAN® analyses. This specific QEMSCAN® database contains 260 subgroups, which comprise major and minor chemical variations of phases. The database was created using millions of point analyses. Major observations are: (1) particles can be micro-texturally characterised and classified with respect to chemical element contents; (2) important textural and chemical particle variations exist in the Black Mass from several origins leading to different levels of quality; (3) elements deleterious to hydrometallurgical processing (i.g. Si, Ca, Ti, Al, Cu and others) are present in well liberated particles; (4) components can be quantified and cathodes active material compositions (LCO, different NMC, NCA, LFP, etc.) that are specific for each battery type can be identified; (5) simulation of further physical mineral processing can optimise Black Mass purity in valuable elements.
Since few years, a lot of companies and industries are developing battery recycling processes for the recovery of critical elements such as Li, Ni and Co. Before hydrometallurgical processing, mechanical and/or thermal treatment are applied in order to produce a black powder, also called blackmass. This high-value powder contains these above mentioned critical elements as well as graphite, rare earth metals and impurities such as solvents, plastics, aluminium and copper. The only data currently used to determine the quality of blackmass are chemical analyses of the major elements. However, micro-textures, liberation of elements and phases, as well as the amount of impurities in various phases are important parameters for the efficiency and performance of a hydrometallurgical process.In order to evaluate the suitability for hydrometallurgical recycling process, it is essential to analyse the blackmass not only chemically but also with respect to size, shape and composition of particles. This presentation shows how these data can be acquired by using a refined QEMSCAN database. This database was created based on billions of point analyses on a total of some million particles. The results show that:Particles can be micro-texturally characterized and classified with respect to chemical element contents. Important textural and chemical particle variations exist in the blackmass of different origins showing different qualities. Elements deleterious to hydrometallurgical processing (i.g. Si, Mg, K, Ca, Fe, Al, Cu and others) can be present in specific and well liberated particles. Cathode active material compositions (different types of NMC as well as LCO, NCA, LFP, NiMH, etc) that are specific for each battery type can be distinguished. Digital simulation of additional physical mineral processing can optimize blackmass quality with respect to valuable elements. Special attention must be given to potential health risks during recycling and the processing of blackmass as elements like Cd and Co can be present in ultrafine particles.
The ferromanganese FeMn alloy is a high added-value product for Eramet, with strong specifications for final users. More and more foundries using FeMn want to get information concerning the inclusion cleanliness and trace elements of these alloys. Indeed, some non-metallic inclusions such as manganese sulfide could be deleterious for future steel causing embrittlement and crack initiation site under mechanical solicitations. Moreover, the mass content of trace elements such as gaseous elements will have a big impact on the microstructure and mechanical behavior of steels after elaboration. Specific sampling has been performed on one of the FeMn Eramet plants to draw up an «identity card» of the product depending on several granulometric fractions. Eramet Ideas (France) performed microstructural investigations on FeMn samples using an automated mineralogy system. Oxygen in the rock is not homogenous and ad hoc measurements makes the oxygen assessment inconsitant. The measurement of oxygen on powder is more representative of the totality of the material including the impurities like sand, slag entrapment... However the oxidation of the material during the milling is a concern and different milling conditions conduct to variation in the oxygen analyses. According to the milled powder analyses, other chemical variations were observed from one granulometric fraction to another. The inclusion cleanliness was carried out using an automated mineralogy system (Qemscan system) to determined the nature of non-metallic inclusions and their dispersion trough the ferromanganese alloy. Using theoritical phase density, a reconciliation between Qemscan measurements and chemical analyses has been performed. It is observed that oxygen content is in a better agreement with chemical analyses on milled powder. The main non-metallic inclusions corresponds to manganese oxyde and sulfide. Some complementary electron microprobe measurements have been carried out to determine the nature of manganese oxide. Then, polution such as slag particles, oxide layer and cooling belts sands were indexed in the milled samples whereas no traces were observed on the selected rock samples.