Triboelectric nanogenerators (TENG), which convert mechanical energy (such as ocean waves) from the surrounding environment into electrical energy, have been identified as a green energy alternative for addressing the environmental issues resulting from the use of traditional energy resources. In this experimental design, we propose rolling spherical triboelectric nanogenerators (RS-TENG) for collecting energy from low-frequency ocean wave action. Copper and aluminum were used to create a spherical frame which functions as the electrode. In addition, different sizes of spherical dielectric (SD1, SD2, SD3, and SD4) were developed in order to compare the dielectric effect on output performance. This design places several electrodes on each side of the spherical structure such that the dielectric layers are able to move with the slightest oscillation and generate electrical energy. The performance of the RS-TENG was experimentally investigated, with the results indicating that the spherical dielectrics significantly impact energy harvesting performance. On the other hand, the triboelectric materials (i.e., copper and aluminum) play a less important role. The copper RS-TENG with the largest spherical dielectrics is the most efficient structure, with a maximum output of 12.75 V in open-circuit and a peak power of approximately 455 nW.
A horizontal towed linear coherent hydrophone array is often employed to estimate the spatial intensity distribution of incident plane waves scattered from the geological and biological features in an ocean acoustic waveguide using conventional beamforming. However, due to the physical limitations of the array aperture, the spatial resolution after conventional beamforming is often limited by the fat main lobe and the high sidelobes. Here, we propose a method originated from computer vision deblurring based on deep learning to enhance the spatial resolution of beamformed images. The effect of image blurring after conventional beamforming can be considered a convolution of beam pattern, which acts as a point spread function (PSF), and the original spatial intensity distributions of incident plane waves. A modified U-Net-like network is trained on a simulated dataset. The instantaneous acoustic complex amplitude is assumed following circular complex Gaussian random (CCGR) statistics. Both synthetic data and experimental data collected from the South China Sea Experiment in 2021 are used to illustrate the effectiveness of this approach, showing a maximum 700% reduction in a 3 dB width over conventional beamforming. A lower normalized mean square error (NMSE) is provided compared with other deconvolution-based algorithms, such as the Richardson–Lucy algorithm and the approximate likelihood model-based deconvolution algorithm. The method is applicable in various acoustic imaging applications that employ linear coherent hydrophone arrays with one-dimensional conventional beamforming, such as ocean acoustic waveguide remote sensing (OAWRS).
Ocean Acoustic Waveguide Remote Sensing (OAWRS) typically utilizes large-aperture linear arrays combined with coherent beamforming to estimate the spatial distribution of acoustic scattering echoes. The conventional maximum likelihood deconvolution (DCV) method uses a likelihood model that is inaccurate in the presence of multiple adjacent targets with significant intensity differences. In this study, we propose a deconvolution algorithm based on a modified likelihood model of beamformed intensities (M-DCV) for estimation of the spatial intensity distribution. The simulated annealing iterative scheme is used to obtain the maximum likelihood estimation. An approximate expression based on the generalized negative binomial (GNB) distribution is introduced to calculate the conditional probability distribution of the beamformed intensity. The deconvolution algorithm is further simplified with an approximate likelihood model (AM-DCV) that can reduce the computational complexity for each iteration. We employ a direct deconvolution method based on the Fourier transform to enhance the initial solution, thereby reducing the number of iterations required for convergence. The M-DCV and AM-DCV algorithms are validated using synthetic and experimental data, demonstrating a maximum improvement of 73% in angular resolution and a sidelobe suppression of 15 dB. Experimental examples demonstrate that the imaging performance of the deconvolution algorithm based on a linear small-aperture array consisting of 16 array elements is comparable to that obtained through conventional beamforming using a linear large-aperture array consisting of 96 array elements. The proposed algorithm is applicable for Ocean Acoustic Waveguide Remote Sensing (OAWRS) and other sensing applications using linear arrays.
Inferring seabed geoacoustic and scattering parameters from acoustic data is challenging due to inherent parameter correlations. Combining short-range propagation with long-range reverberation data helps mitigate these challenges, especially when multi-frequency datasets are used to address local optimization issues and parameter sensitivities. However, using the full dataset can lead to high computational costs and reduced parameter sensitivity across frequencies. This paper proposes a multi-step joint inversion method that sequentially updates parameters based on their frequency-dependent sensitivity, ensuring convergence to the global optimum while reducing computational demands. This approach enhances the efficiency and reliability of seabed parameter estimation, offering a promising solution for marine geophysical applications. The multi-step strategy is validated using both simulated and experimental data.