The technical route proposed by Thunman et al. to use OC to aid fluidized bed combustion is very creative, although it is likely that the OCAC technology was inspired by chemical looping combustion (CLC) technology developed at the same department of Chalmers University of Technology. OCAC shares many characteristics with CLC as well as with three-way catalyst (TWC) technology in terms of adopting the oxygen-carrying material, gas-solid redox reaction, improving fuel conversion and reducing pollutants, etc. Therefore, the principle and technical characteristics of TWC and CLC will be briefly reviewed here to provide some preliminary knowledge before introducing working principle of OCAC. In addition, the operation of reactor, reaction temperature, theperiod ofredox reaction, type of bed material and reaction products of the TWC, CLC and OCAC technologies are compared and analyzed comprehensively in the last part of this chapter.
Oxy-fuel combustion is regarded as one of the most promising carbon capture and storage technologies to mitigate the climate change, which has been widely studied and demonstrated in academia and industry. In the oxy-fuel process, a mixture of recycled flue gas and pure O2 obtained from an air separation unit is introduced into the combustion chamber to replace air as oxidant gas. Therefore, high concentration of CO2 can be obtained in flue gas, which is suitable for the subsequent carbon storage and utilization. It also has other advantages, such as low NOx emission, easy scale-up, and applicability in existing power plant. However, the intensive energy consumption associated with the ASU is the bottleneck limiting its further commercialization. The OCAC process has a proven advantage of burning fuel at lower oxygen-fuel ratio compared to conventional FBCs. Therefore, the combination of oxy-fuel combustion and the OCAC technology, i.e. oxygen-carrier-aided oxy-fuel combustion (oxy-fuel-OCAC), can be expected to improve the utilization of O2, leading to less energy consumption from the ASU.
The OCAC concept has been validated by operation of FB boilers on lab-scale, semi-industrial scale and full industrial scale. Based on the current progress in the development of OCAC technology, it has been proven that the OCAC is a feasible technology showing obvious benefits in the applications on a CFB boiler. However, there are still challenges remaining for more perspectives, includes fundamentals regarding transport phenomena and chemical reactions, more testing and application of OCAC, techno-economic analysis of OCAC technology, process scale-up and optimization, etc. This chapter puts forward the future research directions from the above aspects in detail, have been paid special attention and discussed thoroughly.
As a new concept, oxygen carrier aided combustion (OCAC) technology proposed in 2013 by Chalmers University of Technology’s group, can alleviate the problem of uneven distribution of oxygen in the reactors. In the past 10 years,various research institutions, including Chalmers University of Technology, University of Cambridge, Tsinghua University, Friedrich-Alexander University and University of Nottingham, have conducted a series of studies on OCAC technology. It is worth mentioning that Chalmers University of Technology has complied with most of these studies from laboratory to industry scales. In particular, they carried out a serious of semi-industrial scale experiments in the 12 MWthCFB boiler, which is well-known research boiler. OCAC technology is comprehensively introduced from six aspects: combustion characteristics, NOx/SOx emission, ash-related issues, aging of oxygen carrier, oxygen carrier recovery and physicochemical characteristics of oxygen carrier. In this chapter, allsummarized studies were performed under traditional air-combustion conditions without much consideration of CO2 capture.