Biodegradable thin films based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(caprolactone diol) (PCL-diol) blend were developed using the solution casting method. PHBV is biodegradable, biocompatible, and produced naturally by bacterial activity, but its use is restricted by high crystallinity and low resistance to thermal degradation with melting temperatures close to degradation thus narrowing the processing window. Solution casting was chosen as a cost-effective method reducing energy consumption and avoiding thermal degradation during processing. The increase in PCL-diol in blend composition (40–60 wt%) enhances the film-forming ability of PHBV and the wettability along with the decrease in the roughness of the resulting materials as revealed by contact angle measurements, scanning electron microscopy (SEM), and atomic force microscopy (AFM). Optimal composition in terms of filmogenity and surface structure has been achieved by the addition of PCL-diol in the amount of 60 wt%. FTIR confirmed the expected chemical structures with no evidence of chemical interactions between the two polymers.
Herein, we report an efficient and facile strategy for the preparation of imidazolium-based ionic liquid (IL) monomers ([CnVIm][Br], n = 2, 4, 6, 8, 10, and 12) and their corresponding polymeric ionic liquids (PILs) with potent antimicrobial activities against Gram-negative and Gram-positive bacteria and fungi. The electrospinning technique was utilized to tailor the polymers with the highest antimicrobial potency into porous membranes that can be easily implemented into diverse systems and extend their practical bactericidal application. The antimicrobial mechanism of obtained ILs, polymers, and nanomaterials is considered concerning the bearing chain length, polymerization process, and applied processing technique that provides a unique fibrous structure. The structure composition was selected due to the well-established inherent amphiphilicity that 1-alkylimidazolium ILs possess, coupled with proven antimicrobial, antiseptic, and antifungal behavior. The customizable nature of ILs and PILs complemented with electrospinning is exploited for the development of innovative antimicrobial performances born from the intrinsic polymer itself, offering solutions to the increasing challenge of bacterial resistance. This study opens up new prospects toward designer membranes providing a complete route in their designing and revolutionizing the approach of fabricating multi-functional systems with tunable physicochemical, surface properties, and interesting morphology.
Electrospun systems can be applied to various areas, particularly in biomedicine for skin treatment. The fabricated nanofibers represent an interconnected three-dimensional network with a high surface area to volume ratio providing structural and morphological similarities with the extracellular matrix. Hence, facilitate the removal of exudates, promote gaseous exchange, conform to the contour of the treated area and in the case of drug-loaded nanofibers resulting in improved bioavailability. Polyvinylpyrrolidone was selected as a polymer carrier due to its biocompatible, hydrophilic nature with good chemical and mechanical properties, approved by the U.S. FDA (Food and Drug Administration) as a safe polymer for biomedical and food applications. Calendula officinalis or Marigold extract is one of the oldest medical plants with numerous proven pharmacological effects including anti-inflammatory, antibacterial/antifungal and wound healing activity related to the components of the flowers such as sesquiterpenes, saponins, triterpenes, flavonoids. Coenzyme Q10 (CoQ10, Ubiquinone) is a naturally occurring oil-soluble antioxidant and anti-inflammatory agent that supports collagen production, mostly popularized as an anti-aging ingredient in skincare products for topical use. Novel Marigold extract and CoQ10–loaded polyvinylpyrrolidone nanofibers intended for skin treatment and wound therapy were developed using the electrospinning technique. The presence of functional groups on the nanofibrous surfaces was confirmed by FTIR analysis, the SEM images show the average size of the obtained nanomats and the thermal properties were investigated via DSC analysis.
To reduce the high post-harvest losses of perishable fruits due to fungal spoilage, a novel, self-healing, active multilayer coating based on green polymer chemistry was developed. The system was constructed by the layer-by-layer technique from a dual-modified pullulan polyelectrolyte pair—pullulan maleate and enzymatically derived pullulan betaine with incorporation of β-cyclodextrin/neem oil inclusion complex (β-CD/NO). SEM and DSC analyses confirmed the successful formation of the complex and the structural transition to a rough topography. Due to strong interlayer electrostatic interactions and β-CD as a rigid filler, the multilayer films with the active complex achieved the highest tensile strength of 1.30 ± 0.61 MPa (up to 4× increased in comparison to the monolayer films), with a decrease in elasticity to 10.84%. Additionally, water vapor permeability values were reduced by 22%–28% compared to related biomatrices, while rapid, water-activated self-healing successfully repaired physical film damage. In vitro testing against Candida albicans showed a pronounced synergistic effect with a zone of inhibition of 16.5 ± 1.1 mm for the active formulation. During seven-day in vivo testing on fresh figs, the active coating effectively suppressed yeast proliferation at room temperature (maintaining levels at 2.1 log CFU/g versus 7.1 in untreated figs) and under refrigerated conditions. This innovative system represents a highly promising and sustainable platform for active food packaging.
The use of biodegradable polymers from renewable resources in polymer manufacturing, food packaging and for medical application is becoming a favorable option over petroleum-based plastics. Among all biopolymers, biopolyesters poly(lactic acid) (PLA) and polyhidroxyalkanoates (PHAs) are considered as the most commercially promising bioplastics. PLA is a biopolyester produced by polymerization of D-, L- lactic acids originating through fermentation of simple sugars from agricultural sources (corn, potato, sugar cane, sugar beet, etc.). PHA is a generic designation for biopolyesters produced by controlled microbial fermentation in the presence of an abundant source of sugars or lipids. The focus of this study was to prepare fully biodegradable flexible nanomaterials using PLA and poly(hydroxybutyrate) (PHB) polymer blend solution by means of electrospinning technique. Since PHB possesses low resistance to thermal degradation with melting temperatures close to degradation and narrowing the processing window, the electrospinning technique reduces energy consumption and avoids thermal degradation during processing. A complete morphological, structural and thermal characterization of the developed materials was conducted at the same time.
Hydrogels are considered to be a versatile and desirable material, due to their great ability of water retention, flexibility, viscoelasticity, and good mechanical properties. Silk fibroin (SF) is one of the most abundant biopolymers used for preparation of hydrogels. SF hydrogels can be prepared by self-assembly or induced by physical or chemical cross-linking. Self-assembly of SF hydrogels was shown to be favorable due to its simplicity and the potential harmfulness of chemical cross-linking agents. However, it is often very slow and time-consuming process, which is the main drawback and limitation of SF industrial application. In this study, a novel method of preparing SF hydrogels from aqueous dispersions of SF powder is presented. The results showed that the gelation time is significantly reduced when SF hydrogels are prepared from SF dispersions instead of SF solutions, yet both types of hydrogels had similar rheological and viscoelastic properties, within the investigated concentration range. All prepared hydrogels showed thixotropic behavior and the prevailing of storage modulus in comparison to loss modulus.