Microplastics (MPs) have been identified as emerging environmental pollutants classified as primary or secondary based on their source. Composition, shape, size, and colour, among other characteristics, are associated with their capacity to access the food chain and their risks. While the environmental impact of MPs has received much attention, the risks for humans derived from their dietary exposure have not been yet assessed. Several institutions and researchers support that the current knowledge does not supply solid data to complete a solid risk characterization of dietary MPs. The aim of this paper is to review the current knowledge about MPs in foods and to discuss the challenges and gaps for a risk analysis. The presence of MPs in food and beverages has been worldwide observed, but most authors considered the current data to be not only insufficient but of questionable quality mainly because of the outstanding lack of consensus about a standardized quantifying method and a unified nomenclature. Drinking water, crustaceans/molluscs, fish, and salt have been identified as relevant dietary sources of MPs for humans by most published studies. The hazard characterization presents several gaps concerning the knowledge of the toxicokinetic, toxicodynamic, and toxicity of MPs in humans that impede the estimation of food safety standards based on risk. This review provides a tentative exposure assessment based on the levels of MPs published for drinking water, crustaceans and molluscs, fish, and salt and using the mean European dietary consumption estimates. The intake of 2 L/day of water, 70.68 g/day of crustaceans/molluscs, 70.68 g/day of fish, and 9.4 g/day of salt would generate a maximum exposure to 33,626, 212.04, 409.94 and 6.40 particles of MPs/day, respectively. The inexistence of reference values to evaluate the MPs dietary intake prevents the dietary MPs risk characterization and therefore the management of this risk. Scientists and Food Safety Authorities face several challenges but also opportunities associated to the occurrence of MPs in foods. More research on the MPs characterization and exposure is needed bearing in mind that any future risk assessment report should involve a total diet perspective.

Sports nutrition supplementation is a widespread practice. Whey protein supplements contribute not only to protein intake but also to dietary exposure to minerals. The labelling present provides the percentage of protein and rarely refers to other components, such as potentially toxic elements such as B, Cu, Mo, Zn, and V that present tolerable upper intake levels set by the European Food Safety Authority. The percentage of protein declared on supplement labelling was checked using the Kjeldahl method, and the levels of Ca, Mg, K, Na, Ba, B, Co, Cu, Cr, Sr, Fe, Li, Mn, Mo, Ni, V, Zn, and Al were analyzed by ICP-OES with the aim of characterizing the protein and mineral contents of isolate and concentrate whey protein supplements representative of the European market. The protein content was 70.9% (18–92.3%) and statistically significant differences were observed between the declared and real protein percentages. Among the minerals, K (4689.10 mg/kg) and Ca (3811.27 mg/kg) presented the highest levels, whereas Co (0.07 mg/kg) and V (0.04 mg/kg) showed the lowest levels. It was concluded that the quality and safety of these products needs to be monitored and regulated. A high degree of non-compliance with labelling claims was detected. Furthermore, the contributions to the recommended and tolerable intakes among regular consumers need to be assessed.

Baby food from jars is made of meat, vegetables or fruits, and might be a valuable source of essential elements such as Na or K. However, these infant products could also be a source of toxic elements such as Al or Cd, which are dangerous to infants. In total, 45 samples of various kinds of baby food in jars (meat, vegetables, fruit and mixed) were analyzed using inductively coupled plasma spectrometry (ICP OES) with the aim of evaluating the daily intake of essential elements (K, Na, Ca, Mg, Fe, Zn, Cu, Co, Mo, Mn) and dietary exposure to toxic elements (Al, Cd, Pb, B, Ba, V, Sr, Li, Ni). Mixed jars registered the highest concentrations of Na, Ca, Zn, Fe. Al (8.22 ± 8.97 mg/kg wet weight) stands out in vegetable jars. In total, 130 g/day of mixed jars fulfills daily Zn and Ca requirements. These consumption scenarios (130 g/day, 250 g/day) supposed high Mn intakes (40 times higher than the recommended value), which could pose a risk to infants’ health. Pb, Ni, Cd and Al intakes exceed the maximum values. It is recommended to avoid the daily consumption of these products since it can pose a risk to the health of infants. Chemical compounds studied in this article: Nitric acid (PubChem: CID 944).

There are a large number of pests which are detrimental to plant production, specifically to banana cultivation, and the use of pesticides is the main method of control of these pests. Therefore, the number of active substances in pesticides has been steadily increasing since before the Second World War. There is growing consumer concern about the health effects of pesticide residues and there is certainly evidence of a link between pesticide exposure and the prevalence of chronic diseases. Therefore, it is of particular interest to study the presence of pesticide residues in bananas and their toxicological, agricultural and legal implications. In this study, the content of pesticide residues in bananas produced in the Canary Islands during a ten-year period from 2008 to 2017 was determined. A total of 733 samples of bananas were analysed during the study period, in which 191 different active substances were investigated, involving 103,641 assessments. The samples analysed were selected in such a way that they are representative of the banana sector in the Canary Islands as a whole, taking into account geographical and climatic factors, cultivation methods and the processing of bananas in packaging, which are the differentiating factors in the use of pesticides. The reference parameter for the residue investigation is the MRL (maximum residue limit).

The Canary Islands, located in the Atlantic Ocean, are an archipelago of volcanic origin which, for decades, has been affected by natural fluoride contamination in the water supply of some of its islands, mainly the island of Tenerife. In addition, recent volcanic eruptions in the archipelago and the increased demand for water supply have led to an increase in the fluoride content in other areas which, historically, were not affected. Fluoride content was determined in 274 water supply samples from the most populated islands of the Canary Islands (Tenerife and Gran Canaria) collected during the months of June 2021 to May 2022. The samples were analysed by fluoride ion selective potentiometry. The highest concentrations in Tenerife were found in the municipalities of Sauzal (7.00 mg/L) and Tegueste (5.39 mg/L), both water samples are over the parametric value of 1.5 mg/L set in the supply water legislation. In the Gran Canaria Island, the highest fluoride levels were found in Valsequillo and Mogán with 1.44 mg/L in both locations, but under the parametric fluoride value abovementioned. Consumption of just 1 L of water per day in the El Sauzal area would result in a contribution rate of 77% for adults and children over 15 years of age (Upper Level value of 7 mg/day) and 108% for children 9–14 years of age (UL value of 5 mg/day). The contribution rates increase considerably, reaching or exceeding 100% of the reference value (UL) with increasing consumption of 1 to 2 L of water per day. Therefore, it is considered that there is a health risk of overexposure to fluoride on the island of Tenerife. In the case of the island of Gran Canaria, it has been shown that even the consumption of 2 litres of water per day does not confer contribution rates that pose a health risk.

Canary Islands is a North Atlantic Ocean archipelago in the Macaronesian region that stand out for its great algae diversity and its climatic conditions. However, even in this low industrialised area, human activities tend to increase the marine pollution. Asparagopsis spp. and Liagora spp. algae are red algae frequent in the Canary Islands’ coasts. Therefore, they could be used as bio-indicators of marine pollution for trace elements. A total of 30 samples of both algae’s species from Tenerife’s southern coast, specifically in Playa Grande, Porís de Abona, in Arico (Tenerife, Spain) were used to determine trace element content (Mn, B, Ba, Cu, Cd, Co, Fe, Li, Mo, Ni, Pb, Sr, V, Zn, Al, Cr) through inductively coupled plasma atomic emission spectroscopy (ICP—OES). Highest Fe concentrations were found in Liagora spp. concentrations (1190 ± 1545 mg/kg dw) and Al (288 ± 157 mg/kg dw) was more significant in Asparagopsis spp. High concentrations of B were also registered in both species 80.2 ± 34.2 mg/kg dw and 77.9 ± 34.2 mg/kg dw, respectively. The recorded concentrations show a high contamination scenario in the collected area. Porís is known by its marine diversity and by its higher pollution levels, compared with other locations of Tenerife, due to the currents present on the Canary Island and its singular north orientation, actions must be taken to reduce pollution.