Tatacipta Dirgantara

Prof. Dr. Tatacipta Dirgantara


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 January 2020 in Materials
Verified
Journal Article
Open access
PDF file
AWArie Wibowo
Arie Wibowo
Cian VyasCian Vyas
Cian Vyas
Glen CooperGlen Cooper
Glen Cooper
FQFitriyatul Qulub
Fitriyatul Qulub
RSRochim Suratman
Rochim Suratman
Paulo BartoloPaulo Bartolo
Paulo Bartolo
Electrostimulation and electroactive scaffolds can positively influence and guide cellular behaviour and thus has been garnering interest as a key tissue engineering strategy. The development of conducting polymers such as polyaniline enables the fabrication of conductive polymeric composite scaffolds. In this study, we report on the initial development of a polycaprolactone scaffold incorporating different weight loadings of a polyaniline microparticle filler. The scaffolds are fabricated using screw-assisted extrusion-based 3D printing and are characterised for their morphological, mechanical, conductivity, and preliminary biological properties. The conductivity of the polycaprolactone scaffolds increases with the inclusion of polyaniline. The in vitro cytocompatibility of the scaffolds was assessed using human adipose-derived stem cells to determine cell viability and proliferation up to 21 days. A cytotoxicity threshold was reached at 1% wt. polyaniline loading. Scaffolds with 0.1% wt. polyaniline showed suitable compressive strength (6.45 ± 0.16 MPa) and conductivity (2.46 ± 0.65 × 10−4 S/cm) for bone tissue engineering applications and demonstrated the highest cell viability at day 1 (88%) with cytocompatibility for up to 21 days in cell culture.

29 December 2021 in World Electric Vehicle Journal
Verified
Journal Article
Open access
PDF file
LPLeonardus Kenny Pratama
Leonardus Kenny Pratama
SSSigit Puji Santosa
Sigit Puji Santosa
TDTatacipta Dirgantara
Tatacipta Dirgantara
DWDjarot Widagdo
Djarot Widagdo
Improvement in electric vehicle technology requires the lithium-ion battery system’s safe operations, protecting battery fire damage potential from road debris impact. In this research a design of sandwich panel construction with a lattice structure core is evaluated as the battery protection system. Additive manufacturing technology advancements have paved the way for lattice structure development. The sandwich protective structure designs are evaluated computationally using a non-linear dynamic finite element analysis for various geometry and material parameters. The lattice structure’s optimum shape was obtained based on the highest Specific Energy Absorption (SEA) parameter developed using the ANOVA and Taguchi robust design method. It is found that the octet-cross lattice structure with 40% relative density provided the best performance in terms of absorbing impact energy. Furthermore, the sandwich panel construction with two layers of lattice structure core performed very well in protecting the lithium-ion NCA battery in the ground impact loading conditions, which the impactor velocity is 42 m/s, representing vehicle velocity in highway, and weigh 0.77 kg. The battery shortening met the safety threshold of less than 3 mm deformation.

3 June 2021 in International Journal of Fracture
Verified
Journal Article
Closed access
PDF file
IWI Made Wiragunarsa
I Made Wiragunarsa
LZLavi Rizki Zuhal
Lavi Rizki Zuhal
TDTatacipta Dirgantara
Tatacipta Dirgantara
IPIchsan Setya Putra
Ichsan Setya Putra

5 September 2022 in Mechanics of Advanced Materials and Structures
Verified
Journal Article
Closed access
AFAfdhal
Afdhal
LGLeonardo Gunawan
Leonardo Gunawan
TDTatacipta Dirgantara
Tatacipta Dirgantara
SSSigit Puji Santosa
Sigit Puji Santosa
FAFauzan Adziman
Fauzan Adziman
DPDitho A. Pulungan
Ditho A. Pulungan
Manufacturing of metal sheets—of critical importance in the automotive, aerospace, and railway industries; is notoriously prone to uncertainty and inaccuracy driven by the lack of control in responding to anisotropic behavior developed during a rate-dependent forming process. Various expensive efforts have been made to evaluate these complex behaviors largely based on trial-and-error approaches, implying a high-fidelity predictive numerical tool is inevitable to promote a cost-effective solution. In this work, a high fidelity anisotropic-viscoplastic constitutive model framework based on Hill 48 yield function, isotropic hardening, and Cowper-Symonds viscoplasticity is developed to investigate the rate-dependent anisotropic behavior of sheet metals. This model is holistically implemented as a user-defined material subroutine (VUMAT) in ABAQUS software. The quality of numerical results is evaluated through comparison with experimental works. In the quasi-static and dynamic tensile test, the stress-strain curves obtained from numerical simulation using the developed constitutive model are in excellent agreement with experimental results. Furthermore, numerical simulation of cup drawing test using the developed constitutive model can accurately predict the earing height compared to experimental results. In addition, some novel relationships in terms of plastic rate-dependent anisotropic behavior of sheet metal forming are successfully established through the extended use of the validated numerical model.

30 September 2020 in Journal of Engineering and Technological Sciences
Verified
Journal Article
Open access
PDF file
SHSyarif Hidayat
Syarif Hidayat
JHJam’aH Halid
Jam’aH Halid
TDTatacipta Dirgantara
Tatacipta Dirgantara
MKMipi Ananta Kusuma
Mipi Ananta Kusuma
HUHari Utomo
Hari Utomo
HTHari Tjahjono
Hari Tjahjono
Lessons Learned from Rapid Development of CPAP Ventilator Vent-I during Covid-19 Pandemic in Indonesia

12 May 2020 in Journal of Mechanical Science and Technology
Verified
Journal Article
Closed access
PDF file
PQPham Xuan Quang
Pham Xuan Quang
SWSatrio Wicaksono
Satrio Wicaksono
TDTatacipta Dirgantara
Tatacipta Dirgantara
BHBambang Kismono Hadi
Bambang Kismono Hadi