Pedro Jose Martin-Moreta

Dr. Pedro Jose Martin-Moreta

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
Susana Lopez-QuerolSusana Lopez-Querol
Susana Lopez-Querol
MSMichail Spyridis
Michail Spyridis
PMPedro Jose Martin-Moreta
Pedro Jose Martin-Moreta
JTJuana Arias Trujillo
Juana Arias Trujillo
The majority of wind turbine foundations consist of hollow monopiles inserted in the soil, requiring high computational effort to be numerically simulated. Alternative simplified models are very often employed instead. Three-dimensional solid models, in which the hollow structure and pile are substituted by solid cylinders with equivalent properties, are the most extended simplifications. Very few 2D models can be found in the literature due to the challenge of finding suitable equivalent properties and loads to fully represent the 3D nature of the problem. So far, very limited attention has been devoted to the accuracy of both 3D and 2D simplified models under dynamic and even static actions. Thus, in this paper, simplified 3D and 2D solid models are proposed and justified. An elasto-plastic constitutive model with accumulative degradation is used to simulate the soil behaviour, and frictional contact elements are implemented between the soil and pile to model their interaction. These simplified approaches are compared with the full 3D hollow model, under static and cyclic loads. The results demonstrate that the proposed simplified approaches are a reasonable alternative to the 3D hollow model, which allows researchers and designers to drastically reduce the computational effort in the simulations under long term conditions.

30 November 2023 in CivilEng
Verified
Journal Article
Open access
PDF file
PMPedro Jose Martin-Moreta
Pedro Jose Martin-Moreta
Susana Lopez-QuerolSusana Lopez-Querol
Susana Lopez-Querol
JMJuan P. Martín-Vide
Juan P. Martín-Vide
Bedload transport in a river is a deeply analyzed problem, with many methodologies available in the literature. However, most of the existing methods were developed for reaches of rivers rather than for confluences and are suitable for a particular type of material, which makes them very inaccurate in cases where the sediments are comprised of a mix of different types of soil. This study considers the effect of two different bed sediment sizes, gravel and sand, in relation to bed load transport in a confluence. Five well-known and validated equations (namely Meyer-Peter and Müller, Parker + Engelund and Hansen, Ackers and White, and Yang) are applied to the case study of the Tagus–Alberche rivers confluence (in Talavera de la Reina, Spain), where main and tributary rivers transport different materials (sand and gravel). Field works in the area of the confluence were conducted, and a set of alluvial samples were collected and analyzed. The previously mentioned methods were employed to analyze the geomorphology in the confluence area and downstream of it under different flooding scenarios, concluding different trends in terms of deposition/erosion in the area under historic flooding scenarios. When the trends show erosion, all methods are very consistent in terms of numerical predictions. However, the results present high disparity in the estimated values when the predictions suggest deposition, with Parker + Engelund and Hansen yielding the highest volumes and Meyer-Peter and Müller the lowest (the latter being around 1% of the former). Yang and Ackers and White predict deposits in the same range in all cases (around 15% of Parker and Engelund Hansen). Yang’s formula was found to be suitable for the confluences of rivers with different materials, allowing for the estimation of sediment transport for different grain sizes. The effect of different flow regimes has been analyzed with the application of Yang’s formula to the Tagus-Alberche confluence.

6 February 2025 in Geotechnics
Verified
Journal Article
Open access
PDF file
KCKa Lok Chan
Ka Lok Chan
Susana Lopez-QuerolSusana Lopez-Querol
Susana Lopez-Querol
PMPedro Jose Martin-Moreta
Pedro Jose Martin-Moreta
The increasing global demand for renewable energy has resulted in a high interest in wind power, with offshore wind farms offering better performance than onshore installations. Coastal nations are thus, actively developing offshore wind turbines, where monopiles are the predominant foundation type. Despite their widespread use, the effects of monopile installation methods on the overall foundation behaviour are not sufficiently yet understood. This study investigates how different pile installation procedures—jacked and impact-driven—affect the lateral capacity of monopile foundations under both monotonic and dynamic lateral loads, by comparing them with wished-in-place monopiles, the usual assumption in design, for which no soil disturbance due to installation is considered. Three finite element 3D models were employed to simulate these cases, i.e., wished-in-place monopile, jacked, and impact-driven pile, incorporating soil zoning in the latter cases to replicate the effects of the installation methods. Comparisons between all these models, when subject to lateral monotonic and cyclic loads, are presented and discussed in terms of displacements in the soil and horizontal normal stresses. Results reveal that these installation methods significantly influence soil reactions, impacting the lateral performance of monopiles under both monotonic and dynamic conditions. The impact-driven pile demonstrated the most significant influence on the monopile behaviour. These findings highlight the need for engineers to account for installation effects in the design of monopile foundations to enhance performance and reliability, as well as the optimisation of their design.

20 August 2026 in Water
Verified
Journal Article
Open access
PDF file
BSBockarie Samai
Bockarie Samai
Abiy S. KebedeAbiy S. Kebede
Abiy S. Kebede
Carola Susanne KoenigCarola Susanne Koenig
Carola Susanne Koenig
PMPedro Jose Martin-Moreta
Pedro Jose Martin-Moreta
AKAlalea Kia
Alalea Kia
Interlocking permeable pavements (IPPs) are increasingly adopted within sustainable urban drainage systems to reduce runoff, improve water quality, and strengthen climate-resilient urban infrastructure. However, clogging remains the principal constraint on their long-term hydraulic performance and wider implementation. This review synthesises current evidence on clogging mechanisms, hydraulic decline, and lifecycle mitigation strategies for permeable interlocking concrete pavements (PICPs), concrete grid pavements (CGPs), and plastic grid pavers (PGPs). The literature is dominated by PICP studies, with CGP and PGP underrepresented, restricting typology-specific assessment. Sediment accumulation within joints, grid openings, bedding layers, and near-surface interfaces is consistently identified as the primary clogging mechanism, while traffic, rainfall-runoff loading, biological processes, pollutant retention, and sediment inputs from adjacent impervious surfaces further influence hydraulic deterioration. The findings indicate that hydraulic performance is influenced not only by pavement age but also by interactions among pavement design, filler or joint material, drainage configuration, construction quality, sediment exposure, monitoring, and maintenance. Effective mitigation therefore requires lifecycle management, encompassing source control, pretreatment, appropriate material selection, construction quality assurance, routine hydraulic monitoring, and timely preventive and restorative maintenance. Future research should prioritise standardised clogging assessment protocols, improved laboratory–field integration, targeted investigation of CGP and PGP, biological and pollutant-linked clogging processes, climate-driven rainfall extremes, and decision-support.

11 February 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
PMPedro Jose Martin-Moreta
Pedro Jose Martin-Moreta
JMJuan Pedro Martin-Vide
Juan Pedro Martin-Vide
A numerical modelling study of the influence of boundary conditions in two-dimensional (SRH2D) and three-dimensional (SSIIM3D) finite volume models is presented. The Depth-Averaged and the Reynolds-Averaged Navier-Stokes equations are solved with finite volume methods, and the depth averaged and standard k-ε turbulence models are employed respectively. Experimental data collected from straight and sinuous compound channels are used to compare the computational results. The simulated depth-averaged velocities and water surface levels are used to investigate the accuracy of numerical predictions by comparison with the experimental data. The Manning coefficients were estimated from inbank flow experiments and used for overbank flows with no calibration. Different boundary conditions have been imposed at the inflow and outflow sections, resulting in significant variability of results. For the upstream boundary condition the uniform velocity distribution gives higher water levels than the conveyance based distribution. For the downstream boundary the water levels which guarantee a mean water slope parallel to the bed level are found to be lower than the water level used in the experiments. The influence of the upstream boundary condition has been shown to be larger in the straight compound channel than in the sinuous case. Vegetation in the floodplains also significantly affects the difference in water levels and depth-averaged velocity distributions.