Nutrient monitoring in Micro Indoor Smart Hydroponics (MISH) relies on measuring electrical conductivity or total dissolved solids to determine the amount of nutrients in a hydroponic solution. Neither method can distinguish concentrations of individual nutrients. This study presents the development and testing of a novel spectroscopic sensor system to monitor nitrogen changes in nutrient solutions for MISH systems. The design phase determined that using an inexpensive AS7265x Internet of Thing (IoT) sensor in a transflective spectroscopic application could effectively detect small fluctuations in nitrogen concentraation. Next, a novel transflective sensor apparatus was designed and constructed for use in a MISH system experiment, growing lettuce over 30 days. Two solution tanks of different sizes, 80 L and 40 L, were used in the deployment of the system. Samples from each tank were analyzed for nitrogen concentration in a laboratory, and multilinear regression was used to predict the nitrogen concentrations using the AS7265x 18 spectral channels recorded in the sensor system. Significant results were found for both tanks with an R2 of 0.904 and 0.911 for the 80 and 40 L tanks, respectively. However, while the use of all wavelengths produced an accurate model, none of the individual wavelengths were indicative on their own. These findings indicate that the novel system presented in this study successfully and accurately monitors changes in nitrogen concentrations for MISH systems, using low cost IoT sensors.
Environmental changes and the reduction in arable land have led to food security concerns around the world, particularly in urban settings. Hydroponic soilless growing methods deliver plant nutrients using water, conserving resources and can be constructed nearly anywhere. Hydroponic systems have several complex attributes that need to be managed, and this can be daunting for the layperson. Micro Indoor Smart Hydroponics (MISH) leverage Internet of Things (IoT) technology to manage the complexities of hydroponic techniques, for growing food at home for everyday citizens. Two prohibitive costs in the advancement of MISH systems are power consumption and equipment expense. Reducing cost through harvesting ambient light can potentially reduce power consumption but must be done accurately to sustain sufficient plant yields. Photosynthetic Active Radiation (PAR) meters are commercially used to measure only the light spectrum that plants use, but are expensive. This study presents Adaptalight, a MISH system that harvests ambient light using an inexpensive AS7265x IoT sensor to measure PAR. The system is built on commonly found IoT technology and a well-established architecture for MISH systems. Adpatalight was deployed in a real-world application in the living space of an apartment and experiments were carried out accordingly. A two-phase experiment was conducted over three months, each phase lasting 21 days. Phase one measured the IoT sensor’s capability to accurately measure PAR. Phase two measured the ability of the system to harvest ambient PAR light and produce sufficient yields, using the calibrated IoT sensor from phase one. The results showed that the Adaptalight system was successful in saving a significant amount of power, harvesting ambient PAR light and producing yields with no significant differences from the control. The amount of power savings would be potentially greater in a location with more ambient light. Additionally, the findings show that, when calibrated, the AS7265x sensor is well suited to accurately measure PAR light in MISH systems.
Growing population, increasing urbanization and competition for shrinking resources, Food Security is a challenge around the world. The UN has made it a top priority in their Global Goals to promote sustainable agricultural practices with modern technologies and fair distribution system to sustain the world's population. In this paper we investigate the implementation of a micro controlled environment agriculture system, the MicroCEA, a smart device that automates growing vegetables in an urban indoor residential setting. We have constructed and tested the device and the platform in the United Arab Emirates where about 80% of the food is imported.Our urban smart farming device is based on an extension of the MIT Food Computer version 1, which was adapted to the local environment based on the materials and equipment that could be locally sourced here. To develop our prototype the action research methodology was employed to leverage findings and to improve the next stage of the prototype development. We present our research into the design and testing of a prototyped Internet of Things (IoT) MicroCEA device after comparing other similar open source systems. A new IoT architecture for urban smart farming devices, a set of lessons learned that can be used in forwarding this field of study that can contribute toward achieving food security and improved nutrition and promote sustainable agriculture.
Hydroponics offers a promising approach to help alleviate pressure on food security for urban residents. It requires minimal space and uses less resources, but management can be complex. Microscale Smart Hydroponics (MSH) systems leverage IoT systems to simplify hydroponics management for home users. Previous work in nutrient management has produced systems that use expensive sensing methods or utilized lower cost methods at the expense of accuracy. This study presents a novel inexpensive nutrient management system for MSH applications that utilises a novel waterproofed, IoT spectroscopy sensor (AS7265x) in a transflective application. The sensor is submerged in a hydroponic solution to monitor the nutrients and MSH system predicts the of nutrients in the hydroponic solution and recommends an adjustment quantity in mL. A three-phase model building process was carried out resulting in significant MLR models for predicting the mL, with an R2 of 0.997. An experiment evaluated the system’s performance using the trained models with a 30-day grow of lettuce in a real-world setting, comparing the results of the management system to a control group. The sensor system successfully adjusted and maintained nutrient levels, resulting in plant growth that outperformed the control group. The results of the models in actual deployment showed a strong, significant correlation of 0.77 with the traditional method of measuring the electrical conductivity of nutrients. This novel nutrient management system has the potential to transform the way nutrients are monitored in hydroponics. By simplifying nutrient management, this system can encourage the adoption of hydroponics, contributing to food security and environmental sustainability.
For a typical smart city many IoT (Internet of Things) architectures have been proposed to integrate the various ICT Solutions. Since there are many perspectives, the emphasis and the design of each architecture vary. So at the moment there is no standard architecture. The best approach is to adapt architecture for its intended use. Most of the current IOT architectures are service centered. After surveying literature, there exists a gap in a user centered approach with intelligent edge devices. We propose Aura Minora: a novel architecture for IOT based on a bottom-up approach. Our approach in this paper is to see, how this user centric architecture would help end users as well as the smart city governing body to use existing Internet infrastructure to provide services. We also focus on user privacy and security aspect within this architecture. We further discuss the various views like informational, functional and deployment view of our architecture.