Molecular dynamics (MD) simulations are used to investigate the shock-compression response of Ni + Al spherical nanoparticles arranged in a NaCl-like structure.
19 August 2019 in Physical Chemistry Chemical Physics
We used molecular dynamics simulations to study the shock propagation, inhomogeneous deformation, and initiation of the chemical reaction characteristics of nearly fully dense reactive Ni–Al composites. For shocks with piston velocities Up ≤ 2.0 km s−1, particle velocity dispersion was observed at the shock front, which increased on increasing the shock strength. Plastic deformation mainly occurred at the grain boundaries or grain junction during the shock rise and was accompanied by the generation of a potential hot spot in the region where severe plasticity happens. The composite exhibited higher strength and lower reactivity than the mixtures with certain porosity. In addition, the shock-induced premature melting of Al led to the expansion of particle velocity dispersion from the wavefront to the shocked zone and the formation of a heterogeneous velocity field for stronger shocks beyond critical Up (2.5 km s−1). The velocity heterogeneity in the shocked region led to localized shear, strong erosion of Ni, and occurrence of ultrafast chemical reactions. Therefore, the shock-induced premature melting of Al led to the mechanochemical effect and played a role in the shock-induced chemical reaction in the reactive metal system.
15 October 2018 in Physical Chemistry Chemical Physics
We systematically investigate the wave propagation, plasticity and void collapse, as well as the effects of porosity, specific surface area and impact velocity, in a set of open-cell nanoporous Ta, during shock compression, via performing large-scale non-equilibrium molecular dynamics simulations. The shock wave propagation presents an impedance, sensitive to porosity, but not to specific surface area. Such surprising phenomena are due to the similar sensitivities in density and stress variations to porosity or specific surface area. Upon impact, shock front shapes change from ramped to steep ones, with increasing porosity, specific surface area or impact velocity, owing to the transition from the heterogeneous to homogeneous plasticity along transverse directions. This transition of plasticity arises by (i) the strong impedance on large deformation bands as porosity increases; and (ii) the transition from deformation twinning to dislocation slips, and to amorphization, as the specific surface area or impact velocity increases. Shock-induced plasticity, including their nucleation, growth and interactions, also facilitates the collapse of voids.