Indium is introduced to δ-MnO 2 for the first time. The conductivity of δ-MnO2 can be doubled and a high specific capacity can be achieved at a commercial-level mass loading.
Hybrid white LED lamps with high R a (92) and efficiency (82 lm W −1 ) are reported. Using remote downconversion structure realizes 85% fluorescence remaining after 2870 h aging.
Perovskite solar cells (PSC) are considered promising next generation photovoltaic devices due to their low cost and high-power conversion efficiency (PCE). The perovskite material in the photovoltaic devices plays the fundamental role for the unique performances of PSC. Formamidinium based perovskite materials have become a hot-topic for research due to their excellent characteristics, such as a lower band gap (1.48 V), broader light absorption, and better thermal stability compared to methylammonium based perovskite materials. There are four phases of perovskite materials, named the cubic α-phase, tetragonal β-phase, orthorhombic γ-phase, and δ-phase (yellow). Many research focus on the transition of α-phase and δ-phase. α-Phase FA-based perovskite is very useful for photovoltaic application. However, the phase stability of α-phase FA-based perovskite materials is quite poor. It transforms into its useless δ-phase at room temperature. This instability will lead the degradation of PCE and the other optoelectronic properties. For the practical application of PSC, it is urgent to understand more about the mechanism of this transformation and boost the stability of α-Phase FA-based perovskite materials. This review describes the strategies developed in the past several years, such as mixed cations, anion exchange, dimensions controlling, and surface engineering. These discussions present a perspective on the stability of α-phase of FA-based perovskite materials and the coming challenges in this field.
The global water scarcity crisis is escalating, necessitating the urgent development of innovative water treatment technologies to address freshwater shortages. Capacitive Deionization (CDI) stands out due to its efficient and environmentally friendly advantages. In the application of CDI, researching electrode materials to achieve higher adsorption capacities is crucial. Tableting electrodes have advantages as they can increase mass loading, but they are seldom discussed in the field of capacitive water purification. Therefore, this study applies tableting electrodes to CDI, breaking through the low mass loading bottleneck (50 mg cm− 2), and explores their desalination effect and kinetics. We found that at a voltage window of 0–1.2 V and a flow rate of 10 ml min− 1, tableting electrodes had the best desalination effect. The desalination ability in different salt solutions is greatly influenced by ion diffusion performance, with the best performance observed in LiCl solution (8.9 mg g− 1). Additionally, the manufacturing process of tableting electrodes has the advantages of simple operation, environmental friendliness, and low cost. This study explores for the first time the kinetics and desalination effect of tableting electrodes in CDI devices, providing informational references for the application of tableting electrodes in capacitive desalination.
Aqueous zinc-ion hybrid supercapacitors (AZHSs) are promising candidates for powering mobile devices due to their intrinsically high safety, the high theoretical capacity of zinc anodes, and the wide range of sources of raw materials for activated carbon (AC) cathodes. Here, we report that there is a synergistic effect between the anions of an AZHS electrolyte, which can significantly improve the specific capacity and rate capability of an AC cathode. The results showed that the specific capacities of the AC cathode//2 M ZnSO4(aq)//Zn anode energy storage system were 115 and 41 mAh g−1 at 0.1 and 5 A g−1 current densities, respectively. The specific capacity at a 0.1 A g−1 current density was enhanced to 136 mAh g−1 by doping 0.5% ZnCl2 and 0.5% Zn(CF3SO3)2 in the 2 M ZnSO4 electrolyte. The specific capacity at a 5 Ag−1 current density was enhanced to 69 mAh g−1 by doping 1% ZnCl2 and 0.5% Zn(CF3SO3)2 in the 2 M ZnSO4 electrolyte. In addition, the co-doped electrolyte increased the energy consumption of the binding of the AC surface groups with H+ and inhibited the precipitation of Zn4SO4(OH)6·5H2O. This provides an important perspective for improving the performance of AZHSs.