Prevalence of dental caries in primary and permanent teeth and its relation with tooth brushing habits among schoolchildren in Eastern Saudi Arabia
Objectives: Glass ionomer cement (GIC) is routinely placed as a restorative material in dentistry. However, due to its poor physical properties, its use is limited to cases where the level of stress on restoration is minimal. Improved formulations of GIC have been developed to overcome these drawbacks. The purpose of this study was to evaluate flexural strength of a conventional GIC (Fuji IX) against a newly developed glass carbomer cement (GCP). Materials and Methods: For Fuji IX and GCP, a total of 80 blocks were prepared and divided into 16 groups (n = 5). These groups were further categorized according to the storage medium (artificial saliva and Vaseline) and time intervals (24 h and 1, 2, and 4 weeks). A 3-point bending test was carried out, and statistical analysis was done using ANOVA and Tukey post hoc tests. Results: Fuji IX showed a mean flexural strength of 25.14 ± 13.02 versus 24.27 ± 12.57 MPa for GCP. There was no significant statistical difference between both materials when compared under storage media. Both materials showed the highest value for flexural strength at 2 weeks of storage and lowest at 4 weeks. Conclusion: The storage media do not affect the flexural strength of the specimens with reference to time. Time is the unique factor with relative influence on mean resistance to fracture. Further testing is required to evaluate the true potential of the newly developed GCP.
1 January 2019 in Journal of Family and Community Medicine
OBJECTIVE: The purpose of this study was to investigate students' perception of the educational climate in a medical school in Dammam, Kingdom of Saudi Arabia (KSA). The difference in the perception of preclinical year students and clinical year students was also evaluated. MATERIALS AND METHODS: This cross-sectional study was conducted among 2nd to 6th year students at the medical college of Imam Abdulrahman Bin Faisal University. “Dundee Ready Educational Environment Measure” (DREEM) was used to evaluate the educational environment. RESULTS: Out of 518, 238 students participated in the study; participation rate of 45.9%. The average DREEM score was 112.38 with a SD of 22.4. Students' perception of atmosphere got the highest score (27.1 ± 6.7) of the five DREEM subscales. The 3rd year had the highest DREEM score compared to students of other levels, while the DREEM score of preclinical students was significantly higher than that of the clinical year students. CONCLUSION: Perception of medical students about the educational climate was more positive than negative. Although the DREEM score and its subdomains showed a positive educational environment, students still mentioned some problematic areas that need to be addressed. Findings of this study could encourage other medical colleges in the KSA to focus on weak areas and address the issues raised by students, especially clinical year students.
Purpose: To evaluate the degree of conversion (DoC) of self-adhesive resin luting cements when irradiated through different fiber post lengths. Methods: A total of 60 teeth were sectioned to achieve lengths of 4 mm, 7 mm, and 10 mm, while 60 fiber posts were trimmed to give 3 mm, 6 mm, and 9 mm lengths. Post space was created to accommodate the fiber post and 1 mm of luting cement apically. Two self-adhesive resin luting cements (Multilink Speed and RelyX U200) were used. A total of four cycles of 20 s irradiation was done with an attenuated total reflectance Fourier transform infrared spectroscopy reading between each cycle. Results: The mean ± standard deviation DoC achieved with a light-emitting diode and quartz tungsten halogen for Multilink Speed was 67.4 ± 2.7% and 72.4 ± 4.0%, respectively, while for RelyX U200, the corresponding values were 56.5 ± 2.7% and 62.0 ± 3.8%, respectively. For Multilink Speed, there was no significant difference between the control and the 3 mm group, while for RelyX U200, no significant difference was found between the 6 mm and 9 mm groups. All the other groups showed significant differences. Conclusion: The DoC reduced as the post length increased.