In this technical note, a genetic programming (GP) approach is employed to predict the soil–water characteristic curve (SWCC) of soils. The GP model requires an input terminal set that consists of initial void ratio, initial gravimetric water content, logarithm of suction normalized with respect to atmospheric air pressure, clay content, and silt content. The output terminal set consists of the gravimetric water content corresponding to the assigned input suction. The function set includes operators such as plus, minus, product, division, and power. Results from pressure plate tests carried out on clay, silty clay, sandy loam, and loam compiled in the SoilVision software were adopted as a database for developing and validating the genetic model. For this purpose, and after data digitization, GP software (GPLAB) provided by MATLAB was employed for the analysis. Furthermore, GP simulations were compared with the experimental results as well as the models proposed by other investigators. This comparison indi...
1 August 2019 in International Journal of Geomechanics
The stochastic analysis of unsaturated rainfall-induced slope instability has been studied by many researchers. However, the applicability of random FEM (RFEM) has not been used enough to assess the effect of the uncertainty of soil parameters and suction on these types of slope. In this study, considering the uncertainties of soil parameters leads to an uncertain wetting branch of the soil–water retention curve (SWRC); therefore, a stochastic permeability coefficient curve with respect to suction is obtained. For this purpose, a computer program has been coded to determine the reliability indices of unsaturated slopes under different rainfall intensities and seepage flow using RFEM. In a subsequent part of the paper, the functions of slip surface are obtained for different simulations and rainfall intensities by fitting the points with maximum shear strain. Finally, the uncertainties of slip surfaces are analyzed.