Na Guo

Dr. Na Guo


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 March 2025 in Natural Resources Research
Verified
Journal Article
Closed access
PDF file
HLHaiyang Luo
Haiyang Luo
NGNa Guo
Na Guo
CLChunhao Li
Chunhao Li
HJHang Jiang
Hang Jiang

1 January 2024 in Acta Petrologica Sinica
Verified
Journal Article
Closed access
PDF file
HJHang Jiang
Hang Jiang
NGNa Guo
Na Guo
KZKeFan ZHANG
KeFan ZHANG
HLHaiYang LUO
HaiYang LUO

本文采用短波-热红外光谱联合测量技术+矿物地球化学分析手段, 以川西打枪沟花岗伟晶岩型Li-Be稀有金属矿床的13个钻孔岩心样品为研究对象, 开展了花岗伟晶岩型稀有金属矿床蚀变系统与矿物光谱-地球化学特征的耦合性研究。结果表明: (1)研究区蚀变分带特征表现为(浅→深): 白云母→白云母+钠长石→白云母+角闪石+黑云母+其他斜长石, 其中Li、Be矿体均赋存于白云母+钠长石蚀变带。(2)白云母矿物地球化学计算结果显示研究区短波白云母(波长小于2200nm), 形成压力在0.03~0.25GPa之间, 形成深度为1.3~9.6km, 相关矿化类型为Li-Be; 波长位于2200~2206nm之间的白云母, 形成压力在0.16~0.38GPa之间, 深度为6.1~14.5km, 相关矿化类型为Be; 长波白云母(波长大于2206nm)形成压力为0.45GPa, 形成深度为17.1km, 无矿化。由此认为研究区成矿环境温度在200~500℃之间、压力在0.03~0.34GPa之间、成矿深度在1.3~14.5km之间。(3)与Li矿化相关的白云母波长均小于2200nm, 位移处于10nm波动范围, 说明Li矿可能形成于岩浆-热液混合期; 与Be矿化相关的白云母波长最大值接近2210nm, 位移具20nm波动范围, 说明Be矿形成更靠近母岩, 从岩浆作用后期至岩浆-热液混合期均可形成。(4)应用GF-5B高光谱遥感图像开展不同类型伟晶岩填图, 结果显示研究区北部外围找矿潜力巨大, 打枪沟矿区成矿母岩为桥棚子岩体。本文以短波-热红外联合测量技术, 厘定了不同类型的伟晶岩光谱特征, 并通过地球化学等信息确定了伟晶岩型稀有金属矿产遥感信息识别的重要标志。


20 December 2023 in Revue internationale de géomatique
Verified
Journal Article
Open access
PDF file
YLYaping Luo
Yaping Luo
NGNa Guo
Na Guo
DLDong Liu
Dong Liu
SPShuming Peng
Shuming Peng
XWXinchen Wang
Xinchen Wang
JWJie Wu
Jie Wu
Using hyperspectral data collected in January and June 2022 from the Sha River, the concentrations of total nitrogen (TN) and total phosphorus (TP) were estimated using the differential method. The results indicate that the optimal bands for estimation vary monthly due to temperature fluctuations. In the TN model, the power function model at 586 nm in January exhibited the strongest fit, yielding a fit coefficient (R2) of 0.95 and F-value of 164.57 at a significance level (p) of less than 0.01. Conversely, the exponential model at 477 nm in June provided the best fit, with R2 = 0.93 and F = 80.95 at p < 0.01. In the TP model, the exponential model fit of the differential values at 851 nm with TP in January produced the best results, with R2 = 0.78 and F = 20.61. However, the overall fit in June outperformed that in January. Specifically, the quadratic and linear model fits of the differential values at 824 and 863 nm with TP achieved R2 = 0.96 and F-values of 34.42 and 203.34, respectively.

28 March 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
CLChunhao Li
Chunhao Li
NGNa Guo
Na Guo
YLYubin Li
Yubin Li
HLHaiyang Luo
Haiyang Luo
YZYexin Zhuo
Yexin Zhuo
XLXuerui Li
Xuerui Li
Geothermal resources are crucial for sustainable energy development, yet accurately detecting geothermal anomalies in complex terrains remains a significant challenge. This study develops a multi-source thermal infrared approach to enhance geothermal anomaly detection using Landsat 8 and ASTER land surface temperature (LST) data. The Yangbajing–Yangyi Basin in Tibet, characterized by high altitude and rugged topography, serves as the study area. Landsat 8 winter time-series data from 2013 to 2023 were processed on the Google Earth Engine (GEE) platform to generate multi-year average LST images. After water body removal and altitude correction, a local block thresholding method was applied to extract daytime geothermal anomalies. For nighttime data, ASTER LST products were analyzed using global, local block, elevation zoning, and fault buffer strategies to extract anomalies, which were then fused using Dempster–Shafer (D–S) evidence theory. A joint daytime–nighttime analysis identified stable geothermal anomaly regions, with results closely aligning with known geothermal fields and borehole distributions while predicting new potential anomaly zones. Additionally, a 21-year time-series analysis of MODIS nighttime LST data identified four significant thermal anomaly areas, interpreted as potential magma chambers, whose spatial distributions align with the identified anomalies. This multi-source approach highlights the potential of integrating thermal infrared data for geothermal anomaly detection, providing valuable insights for exploration in geologically complex regions.

1 January 2025 in Acta Petrologica Sinica
Verified
Journal Article
Open access
PDF file
NGNa Guo
Na Guo
ZYZHUO YeXin
ZHUO YeXin
ZWZHOU WeiRui
ZHOU WeiRui
TNTang Na
Tang Na
LXLI XueRui
LI XueRui
DSDENG SiYuan
DENG SiYuan
西藏斑岩成矿系统在不同构造阶段经历了复杂的岩浆活动与热液矿化过程,形成了以冈底斯和班公湖-怒江成矿带为代表的矿床富集区。近年来,基于高光谱技术的矿物精细识别与矿化作用光谱响应研究已成为揭示成矿机理和指导深部找矿的重要手段。本文基于短波红外(SWIR)和热红外(TIR)光谱技术,系统研究了西藏典型斑岩矿床的蚀变矿物光谱特征及其找矿指示意义。研究表明:(1)高光谱技术能够高精度识别矿物的空间分布,并揭示蚀变矿物的成因演化及其与成矿作用的耦合关系;(2)SWIR+TIR联合光谱分析可有效区分不同类型蚀变矿物,提供矿化程度的量化评估参数;(3)矿物特征光谱在矿床类型判别及矿化带圈定方面具有重要指示作用,可为建立高效的找矿预测模型提供科学依据。未来,通过高光谱技术与地球物理、地球化学等方法的多学科融合研究,可进一步提升复杂地质背景下的矿产勘查效率,为战略性矿产资源的高效开发提供重要技术支撑。

19 August 2021 in Geofluids
Verified
Journal Article
Open access
PDF file
ZTZhongping Tao
Zhongping Tao
BLBingli Liu
Bingli Liu
KGKe Guo
Ke Guo
NGNa Guo
Na Guo
CLCheng Li
Cheng Li
YLYaohua Luo
Yaohua Luo
The identification of primary geochemical haloes can be used to predict mineral resources in deep-seated orebodies through the delineation of element distributions. The Jiama deposits a typical skarn–porphyry Cu–polymetallic deposit in the Gangdese metallogenic belt of Tibet. The Cu–polymetallic skarn, Cu–Mo hornfels, and Mo ± Cu porphyry mineralization there exhibit superimposed geochemical haloes at depth. Three-dimensional (3D) primary geochemical halo modeling was undertaken for the deposit with the aim of providing geochemical data to describe element distributions in 3D space. An overall geochemical zonation of Zn(Pb) → Au → Cu(Ag) → Mo gained from geochemical cross-sections, together with dip-direction skarn zonation Pb–Zn(Cu) → Cu(Au–Ag–Mo) → Mo(Cu) → Cu–Mo(Au–Ag) and vertical zonation Cu–(Pb–Zn) → Mo–(Cu) → Mo–Cu–(Ag–Au–Pb–Zn) → Mo in the #24 exploration profile, indicates potential mineralization at depth. Integrated geochemical anomalies were extracted by kernel principal component analysis, which has the advantage of accommodating nonlinear data. A maximum-entropy model was constructed for deep mineral resources of uncertainty prediction. Three potential deep mineral targets are proposed on the basis of the obtained geochemical information and background.