Surface temperature measurement of a hot surface is necessary in order to determine its thermal life. The combustors used in gas turbine systems may subject to high thermal load due to continuous combustion. In order to analyse the surface temperature distribution of combustor, temperature sensing instruments are necessary. Temperature indicating paints is a kind of coating to measure the temperature distribution through its colour change Temperature indicating paint is considered to be one of the most efficient way for temperature measurement. The analysis of this paint can be done through the observation of irreversible colour change with temperature. This work deals with the fabrication of gas turbine combustor and investigating the thermal distribution and finding the hot spots of the combustor using temperature indicating paint.
Temperature sensitive paints (TSP) (or) Temperature indicating paints (TIP) (or) Thermal paints is a kind of coating to measure the temperature distribution (or) profile through its colour change. Thermal paint is considered to be one of the most efficient way for temperature measurement. The analysis of these paints can be done through the observation of irreversible colour change with temperature. This paper describes about the investigations done on the chemistry and behaviour of thermal paints with respect to temperature and time. The study also focuses on the calibration of thermal paints both in experimental and computational methods. In experimental method, the results hold in good agreement with K-type thermocouples as well as the computational results of ANSYS also provides like results. The experimental thermal map of a butterfly specimen has been observed through the continuous exposure of thermal paint MC 350-8 to the continuous flame.
Ocean cover more than 70% of earth surface and ocean waves carries enormous wave power. The substantial part of world electricity can be supplied by utilizing the largest source of untapped clean energy (wave energy). Wave energy is more predictable compare to wind energy and can be forecast 24 hours ahead. In this work, the concept of utilization of wave energy in the power generation has been delivered. The approach to wave energy has been done by using the combination of a buoy and a piston. The work described in this paper aims at the design and fabrication of a wave energy device. A numerical study of the power production by the fabricated device has been done for the implementation of this device in the Indian coastal areas for a clean and sustainable power production in future.