We propose and demonstrate a notch filter on a silicon chip and apply it to a photonic microwave frequency measurement system with high precision and adjustable wide measurement range. The on-chip notch filter is implemented by embedding a serially coupled double microring resonator in a Fabry-Perot cavity consisting of two circular Bragg gratings with high reflectivity. The notch filtering with high quality factor and high rejection ratio is obtained by reconstructing the power transmission spectrum of the double microring resonator through the coherent interference within the Fabry-Perot cavity. The proposed notch filter is fabricated on a silicon-on-insulator wafer and the rejection ratio of the notch filter is measured to be 33.54 dB and the quality factor is 3.93×10 4 . Based on the notch filter, a photonic microwave frequency measurement system is presented where the unknown radio frequency signal is detected by the variation of the output optical power from the notch filter through sweeping reference frequency. The measurement bandwidth of the system can be flexibly adjusted by tuning the output wavelength of the laser source. Broad measurement range of 0-26.62 GHz with a low error of ±0.25 GHz are obtained in a proof-of-concept experiment.
We propose and implement a microwave frequency measurement (MFM) scheme based on stimulated Brillouin scattering (SBS) and an apodized fiber Bragg grating (AFBG), achieving high accuracy in a wide range of measurement with a highly simplified configuration. By sweeping a reference frequency during SBS process, a frequency-to-power mapping between the reference frequency and the monitored output optical power of the MFM system is established. Unknown frequencies can be identified through a specific numerical relationship among the unknown frequency, reference frequency, and Brillouin frequency shift (BFS). The transmission and reflection properties of the AFBG are exploited to offer pump light and probe light simultaneously for SBS process, thereby reducing complexity of the MFM system. It can be derived theoretically that all frequencies larger than one BFS can be measured except for 3/2 BFS. This measurement blind spot can be eliminated by utilizing two segments of single-mode fibers with different BFSs. A measurement error of less than ±1 MHz within 10.68 GHz to 20 GHz is achieved in a proof-of-concept experiment of the proposed MFM approach. This method has also been proved to be applied to dual microwave frequency measurements.
We propose a simplified partitioned Brillouin gain spectrum (BGS) analysis method to enhance the spatial resolution and measurement accuracy of a Brillouin optical time-domain reflectometer (BOTDR) assisted by a first-order Raman pump. We theoretically derive the mathematical model of the partitioned BGS and analyze the superposition process of sub-Brillouin signals within a theoretical spatial resolution range. We unified all the unknown constant parameters of the calculation process to simplify the partitioned BGS analysis method and the value of the uniform parameter is attained through the system test data and numerical analysis. Moreover, to automate data processing, the starting point of the temperature/strain change is determined by the first occurrence of the maximum Brillouin frequency shift (BFS), then the position where the partitioned BGS analysis method calculation begins is obtained. Using a 100 ns probe pulse and partitioned BGS analysis method, we obtain a spatial resolution of 0.4 m in the 78.45-km-long Raman-assisted BOTDR system, and the measurement accuracy is significantly improved. In addition, we achieve a strain accuracy of 5.6 με and a spatial resolution of 0.4 m in the 28.5-km-long BOTDR without Raman amplification.
Mode (de)multiplexers (MDMs) serve as critical foundational elements within systems for facilitating high-capacity communication, relying on mode conversions achieved through directional coupler (DC) structures. However, DC structures are challenged by dispersion issues for broadband mode coupling, particularly for high-order modes. In this work, based on the principles of phase control theory, we have devised an approach to mitigate the dispersion challenges, focusing on a thin-film lithium niobate-on-onsulator (LNOI) platform. This solution involves integrating a customized inverse-dispersion section into the device architecture, offsetting minor phase shifts encountered during the mode coupling process. By employing this approach, we have achieved broadband mode conversion from to and to within a 300 nm wavelength range, and the maximum deviations were maintained below −0.68 dB and −0.78 dB, respectively. Furthermore, the device exhibited remarkably low crosstalk, reaching down to −26 dB.
An optical filter is proposed and demonstrated based on a micro-ring resonator (MRR) embedded in a Fabry-Perot (FP) cavity. By exploiting coherent interference within the FP cavity to reconstruct the transmission spectrum of the MRR, high extinction ratio (ER) and narrow bandwidth for periodic notch filtering is obtained. The FP cavity is composed by two circular Bragg grating (CBG) mirrors, and the two mirrors are well placed so that the light wave can be constantly reflected between the two mirrors to generate resonance. The device is simulated theoretically and fabricated on a silicon-on-insulator (SOI) platform. The proposed optical filter has an ER up to 31dB and a minimum 3dB bandwidth of 10pm according to the simulation result.